Gregory Nutt
2327f5a1b4
Merge remote-tracking branch 'origin/master' into composite
2017-06-16 17:30:03 -06:00
Gregory Nutt
cd54a0340f
Fix a typo. And typo in Kconfig file is reflect in all defconfig files.
2017-06-15 14:29:09 -06:00
Gregory Nutt
e4d262436c
SAMV71-Xult Composite: Now can switch between two different composite configurations dynamically.
2017-06-02 07:19:27 -06:00
Gregory Nutt
815257743d
usbdev composite and SAMV7-Xult: Move board-specific USB composite configuration out of boardctl.c and into board-specific logic where it belongs. Add a configuration option to the boardctl() calls to support multiple composite device configurations dynamically.
2017-06-02 07:11:57 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Alan Carvalho de Assis
853d332b6c
Move CAN subsystem to its own directory and put device drivers there
...
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
2017-05-12 11:48:47 -03:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Sebastien Lorquet
1bb76c43d3
atmel boards
2017-04-28 18:27:30 +02:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4
Remove all setenv.sh files.
2017-04-26 07:49:37 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1
Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB
2017-04-20 14:53:30 -06:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
c3289afa9c
Fix error in last update to a README
2017-03-30 12:29:19 -06:00
Gregory Nutt
0ded0f5866
Update README and comments
2017-03-30 08:43:07 -06:00
Gregory Nutt
5fb222180c
6loWPAN: IEEE802.15.4 MAC driver will need a special form of the network device structure to manage fragmentation of the large packet into frames.
2017-03-29 10:17:34 -06:00
Gregory Nutt
c071e2a30c
Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads.
2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305
Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES
2017-03-27 09:08:14 -06:00
Gregory Nutt
b808084e57
Move wireless IOCTLs from include/nuttx/net/ioctl to include/nuttx/wireless/wireless.h. Add some linux compatible structures to use with the IOCTL commands.
2017-03-13 09:51:31 -06:00
Gregory Nutt
c428661e18
apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.
2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5
Refresh all ARM configurations
2017-03-09 10:23:41 -06:00
Gregory Nutt
ff20d22f66
SAMv7 Ethernet: Fix a return value type.
2017-03-03 19:16:48 -06:00
Gregory Nutt
4f5e0e3519
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 15:27:55 -06:00
Gregory Nutt
0f46d714a9
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 15:10:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
f5f9d82d5a
arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.
2017-03-02 08:43:33 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
4539988d00
Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero().
2017-02-22 10:41:49 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
8ab77c55cd
SAMv71-XULT: Fixes to knsh configuration. Still does not work properly.
2017-01-30 12:49:07 -06:00
Gregory Nutt
eeeb0ad112
Refresh all SAM v7 configurations
2017-01-30 11:24:32 -06:00
Gregory Nutt
d56d16595a
New apps/examples/module and sotest configuration options
2017-01-30 08:42:31 -06:00
Gregory Nutt
00e46b5966
Move gnu-elf.ld from sched/module to libc/modlib. Update paths in Make.defs files to account for new location of file
2017-01-29 09:03:01 -06:00
Gregory Nutt
2717e781f0
libc/modlib: Add build a configuration logic for a shared module library.
2017-01-29 08:55:27 -06:00
Gregory Nutt
6f5a9eb451
Olimex-stm32-p407: Add a NSH protected build configuration; Enable procfs/ in all configurations.
2017-01-23 10:38:54 -06:00
Gregory Nutt
edd9186540
ELF: Move ARMv7-A and ARMv7-R versions of ELF relocation logic to libc/machine
2017-01-21 14:40:26 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Gregory Nutt
4216c4b777
NxWM configurations. If using a 7-bit character set, then the cursor character cannot be 137 (graphic block). Use 95 (underscore) instead.
2017-01-08 09:21:37 -06:00
Gregory Nutt
7035d232f8
NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue.
2017-01-08 09:14:11 -06:00
Gregory Nutt
e1d9bb2ef2
Refresh all NX multi-user configurations
2017-01-08 08:06:18 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gregory Nutt
9df1b28e6c
SAMV71-XULT: Use syslog(LOG_ERR, ..) not the supposedly hidden _err() macro.
2016-12-06 17:40:52 -06:00
Gregory Nutt
35dfe25430
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
2016-12-06 08:51:37 -06:00