Currently the "esp32_spiflash_alloc_mtdpart" allocates a
statically-defined partition from "offset" and "size" set via
Kconfig.
This commit changes the function interface to receive those information
as arguments, enabling the creation of multiple MTD partitions with
different offsets and sizes.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
needed anymore.
Decouple the IRAM heap from the text allocator since that heap can
still be used as a generic pool of memory.
Implement the up_extraheaps_init function to initialize all of the
additional heaps.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Write protection must be disabled before performing changes to the WDT
registers. Furthermore, the routine was resetting the wrong field from
the RTC WDT register.
The RTC_CNTL_WDT_FLASHBOOT_MOD_EN field relates to Flash Boot Protection
and it is enabled by the 1st stage bootloader. The 2nd stage bootloader
takes care of disabling it.
Then the 2nd stage bootloader enables the RTC WDT for checking the
startup sequence of the application image.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This memory region can be accessed by both I & D buses, so the heap can
be used for data storage and code execution.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- I noticed that the getcoreid macro in the latest esp-idf
is much simpler than the current NuttX's.
- This commit replaces the macro with the latest esp-idf's
Impact:
- SMP only
Testing:
- Tested with esp32-devkitc:wapi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
instead calling kmm_heapmember or umm_heapmember because:
1.The stack supplied by caller may allocate from heap too
2.It's hard to implement these two function in ASan case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I196377822b7c4643ab4f29b7c1dc41dcd7c4dab1
Summary:
- According to the Xtensa ISA document, this ISYNC instruction
between WSR SCOMPARE1 and S32C1I is unnecessary
Impact:
- SMP only
Testing:
- Tested with esp32-devkitc:wapi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that DEBUGASSERT sometimes happens in nxsem_wait()
when testing Wi-Fi with esp32-devkitc:wsifi_smp
- The call stack was not from an interrupt handler and actually
g_current_regs[] were correct, even though asserted with
(up_interrupt_handler() == false)
- Finally, I found that we need to call rsync after we set
a new value to the PS register which is described in the
Xtensa document.
- This commit fixes this issue
Impact:
- All xtensa architectures
Testing:
- Tested with esp32-devkitc:wifi_smp and esp32-devkitc:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
