Commit Graph

31146 Commits

Author SHA1 Message Date
Gregory Nutt
fd58bfd9c0 sched/signal: Add logic to wake up a thread that is waiting on a signal if it is canceled. 2017-10-12 08:55:19 -06:00
Gregory Nutt
d0102bdd4c Fix a warning found in build testing. 2017-10-11 14:41:16 -06:00
Gregory Nutt
6de41b6cf3 net/local: Missed at least one change from read() to nx_read(). 2017-10-11 12:16:00 -06:00
Gregory Nutt
181875f3ba fs/vfs: Add new internal OS interface nx_read(). nx_read() is functionally equivalent to read() except that it does not modify the errno variable and it is not a cancellation point. Changed all references to read() in the OS to nx_read(). 2017-10-11 12:13:41 -06:00
Jussi Kivilinna
957831d2ba net/socket: psock_send/psock_sendto: remove assert check for null psock and buf input pointers. Removes check as 'psock == NULL' altogether because that checked for later in psock_send and psock_sendto. Change null check for 'buf' so that it is handled same as in recvfrom.c (return -EINVAL instead of
assert).
2017-10-11 11:04:05 -06:00
Manish Kumar Sharma
b12f693b8b arch/arm/src/samv7: Correct an error in RX DMA setup. 2017-10-11 10:54:02 -06:00
Gregory Nutt
3cd41b0408 sched/task: task_exithook.c fails to link if signals are disabled because was unconditionally trying to send the SIGCHLD signal to the parent in certain configurations. Noted by Jeongchan Kim. 2017-10-11 10:43:30 -06:00
Gregory Nutt
687aace769 Fix typo introduced with last commit. Also update TODO list. 2017-10-11 10:25:27 -06:00
Gregory Nutt
a00d8e16a1 Adds OS internal function nx_write() which is functionally equivalent to write() except that it does not set the errno variable and do not cause cancellation points. 2017-10-11 10:18:30 -06:00
Gregory Nutt
af072d52bc Adds OS internal functions nx_send(), ns_recv(), and nx_recvfrom() which are functionally equivalent to send(), recv(), and recvfrom() except that they do not set the errno variable and do not cause cancellation points. 2017-10-11 09:25:43 -06:00
Gregory Nutt
536e4d7fa6 fs/vfs: Change the return value of internal function fs_getfilep(). It no longer sets the errno variable but, rather, returns errors in the same manner as other internal OS functions. 2017-10-11 08:39:19 -06:00
Gregory Nutt
2f1894f2b4 Z80: Makefile fix for use with curre SDCC 2017-10-11 07:00:24 -06:00
Gregory Nutt
41f3a2adfe restore TABs to Kconfig 2017-10-11 06:39:56 -06:00
Anthony Merlino
dfb7ac4ed5 Merged in antmerlino/nuttx/clicker2 (pull request #507)
clicker2-stm32: Adds SD card, automount, and syslog file support and fixes a few minor issues

* configs/clicker2-stm32: Moves defines for xbee from clicker2-stm32.h to stm32_xbee.h

* configs/clicker2-stm32: Adds support for uSD click boards and automount support

* configs/clicker2-stm32: Fixes minor guard clause

* clicker2-stm32: Bring-up automounter before MMCSD

* clicker2-stm32: MRF24J40 interrupt should only fire on falling edge.

* clicker2-stm32: Adds file syslog support for logging to file on SD card

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-10-11 08:15:57 +00:00
Gregory Nutt
ed59867a16 mqueue.h edited online with Bitbucket 2017-10-11 02:49:20 +00:00
Sebastien Lorquet
d16d4d5568 The INA219 is a combined voltage and current sensor that can measure up to 26 volts and a current that depends on an external shunt resistor. Connection happens via i2c/smbus and the chip features a power supply rail that is independent from the measured voltage, so it can measure low voltages.
This commit adds a driver for this chip.  Right now it measures bus voltage and current, and does not use the internal calibrated current reading, nor the available power measurement.
2017-10-10 17:03:56 -06:00
Gregory Nutt
4a3c1ef2ac Update TODO list 2017-10-10 14:52:47 -06:00
Gregory Nutt
eb79a575f6 Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional. 2017-10-10 14:24:13 -06:00
Gregory Nutt
2238785bf1 Fix a error introduced with nxmq_receive(); update TODO list. 2017-10-10 10:58:26 -06:00
Gregory Nutt
e11e3b2607 Squashed commit of the following:
Change all calls to mq_receive() and mq_timedreceive() in the OS to calls to nxmq_receive() and nxmq_timedreceive(), making appropriate changes for differences in return values.

    sched/mqueue:  Add nxmq_receive() and mxmq_timedreceive() which are functionally equivalent to the standard mq_receive and mq_timedreceive() except that (1) they do not create cancellation points, and (2) the do not modify the application's errno variable.
2017-10-10 09:57:40 -06:00
Gregory Nutt
fca07be1df Squashed commit of the following:
Change all calls to mq_send() and mq_timedsend() in the OS to calls to nxmq_send() and nxmq_timedsend(), making appropriate changes for differences in return values.

    sched/mqueue:  Add internal function nxmq_send() and nxmq_timedsend() that are equivalent to mq_send() and mq_timedsend() except that they do not create cancellation points and do to not modify the errno variable.
2017-10-10 08:44:12 -06:00
Gregory Nutt
c5a5a5a1b6 Trivial update to README 2017-10-10 08:44:12 -06:00
Gregory Nutt
101eb73014 STM32 Serial: Fix a compilation error introduced in some configurations by a recent PR. 2017-10-10 07:23:55 -06:00
Gregory Nutt
02d3e50b48 Update a README file 2017-10-09 13:40:54 -06:00
Gregory Nutt
270aa2848a Squashed commit of the following:
BCM2708:  Add enough infrastructrue (more stubs) to get a clean compilation of the Pi Zero configuration (with many undefined things at link time).

    BCM2708:  Add basic interrupt handling logic

    BCM2708: Add interrupt register definitions.

    BCM2708:  Add irq.h header file

    BCM2708/Pi zero:  bcm_boot.c and bcm_memorymap.h now compile.  Added pizero linker script.

    BCM2708/Pi Zero:  Add Make.defs needed to build.

    arch/arm/include/bcm2708, arch/arm/src/bcm2708, configs/pizero:  Add some basic build and configuration logic.

    configs/pizero:  Add some basic structure of the Rasperry Pi Zero port.

    Created directory configs/pizero.  Nothing there now but a README.txt file.

    Add initial boot.c and memorymap.c files
    Author: Alan Carvalho de Assis <acassis@gmail.com>

    Add AUX/UART/SPI registers definition
    Author: Alan Carvalho de Assis <acassis@gmail.com>

    Pizero GPIO registers
    * Initial commit to add GPIO definitions
    * Add remaining GPIO registers definition
    Alan Carvalho de Assis <acassis@gmail.com>

    BCM2708 memory map:  Add VBASE defintions; fix VCSDRAM address per Alan; move all virtual address to the bottom of the file to avoid confusion -- top is all physical address; bottom is all veritural address.

    Add initial memory map to BCM2708/BCM2835
    Alan Carvalho de Assis <acassis@gmail.com>
2017-10-09 13:11:17 -06:00
Gregory Nutt
d0eb182c00 Minor changes from review of last PR 2017-10-09 12:15:05 -06:00
Mateusz Szafoni
6c25f3d142 Merged in raiden00/nuttx (pull request #505)
Master

* power: Add powerled to Kconfig

* stm32_powerled.c: cosmetics

* stm32_hrtim.c: cosmetics

* stm32/Kconfig: add HRTIM configuration and add DAC external trigger configuration

* stm32f334-disco: Add powerled example configuration

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-10-09 18:07:09 +00:00
Juha Niskanen
798d03cb3d Merged in juniskane/nuttx_stm32l4/stm32_serial_patches_pr (pull request #504)
Stm32, stm32l4 serial patches

* stm32: serial: add interface to get uart_dev_t by USART number, stm32_serial_get_uart

* stm32: serial: do not stop processing input in SW flow-control mode

* stm32l4: serial: do not stop processing input in SW flow-control mode

* stm32l4: serial: suspend serial for Stop mode

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-10-09 16:20:24 +00:00
Gregory Nutt
ecf6dda2c5 Correct recurring typo: semaphore not semapore 2017-10-09 09:57:56 -06:00
Gregory Nutt
9b61cc6b25 task: Add new cancellation point interface, check_cancellation_point(). 2017-10-09 09:43:04 -06:00
Gregory Nutt
e7c52bac60 Squashed commit of the following:
sched/mqueue:  Rename all private static functions for use the nxmq_ vs. mq_ naming.

    sched/mqueue:  Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_.  The mq_ prefix is reserved for standard application interfaces.
2017-10-09 09:06:46 -06:00
Sakari Kapanen
01a4060a1b RNDIS: Use CONFIG_USBDEV_MAXPOWER instead of hardcoded value
RNDIS: Use LPWORK for network operations by default
2017-10-09 09:00:48 -06:00
Gregory Nutt
82ce0c5921 libc/termios: Adds tcflow. 2017-10-09 07:35:31 -06:00
Gregory Nutt
f790841641 Fix a copy paste error in recent config/z80sim change. 2017-10-09 06:48:51 -06:00
Gregory Nutt
3e40460ab8 lpc31xx: Cosmetic changes. 2017-10-08 19:33:05 -06:00
Gregory Nutt
700f1a8e8c Eliminate some warnings found in build testing. 2017-10-08 16:27:17 -06:00
Gregory Nutt
6a13faf702 net/local: Need to include nuttx/semaphore.h to eliminate some new warnings. 2017-10-08 13:31:03 -06:00
Mateusz Szafoni
e612ae0803 Merged in raiden00/nuttx (pull request #503)
Master

* stm32_hrtim.c: fix burst mode prescaler update

* powerled.h: add fault field to state structure

* stm32f334-disco: add flash mode support for powerled driver + cosmetics

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-10-08 19:13:12 +00:00
Gregory Nutt
69a57279a6 Fix a typo 2017-10-08 12:38:53 -06:00
Gregory Nutt
c11c249e8f Fix some compile problems in last commits when debug assertions are enabled. 2017-10-08 12:27:17 -06:00
Gregory Nutt
5e4f4ee788 libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points. 2017-10-08 12:14:18 -06:00
Gregory Nutt
6642e20e05 libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points. 2017-10-08 11:52:32 -06:00
Gregory Nutt
cd417249c9 configs/z80sim: Fix a naming problem. Also, don't try to build the serial driver if CONFIG_NFILE_DESCRIPTOR=0. 2017-10-08 09:47:06 -06:00
Gregory Nutt
ced5b6d504 libc/stdio: Build the lib_noflush() and lib_snoflush() stubs even if CONFIG_FILE_DESCRIPTORS=0. They may still be needed. 2017-10-08 09:45:50 -06:00
Gregory Nutt
a83aef4763 Fix some problems in the previous commits: Forgot to update sigset() after change to prototype. Also there was a stray semicolon in the change signal(). 2017-10-08 09:22:00 -06:00
Gregory Nutt
f6f740a511 Update TODO list 2017-10-08 09:06:35 -06:00
Gregory Nutt
3664b0ab66 SDCC Fixes: Change some prototypes and some assumptions about the size of unsigned int to get to a clean SDCC compile. 2017-10-08 08:50:18 -06:00
Gregory Nutt
a857cc04e4 Fix some build problems after recent separation of internal OS from application interfaces. The build problem only occurs in the PROTECTED and KERNEL builds where separate libraries are built for the applications and for use within the OS. In these cases, the correct interfaces must be used. This commit fixes a few of these, so I can get through build testing, but there are many more that need fixin'. 2017-10-08 08:13:47 -06:00
Gregory Nutt
be1cb58f67 sama5d4-ek: Remove a really old defconfig example file that is so far out of date that it can only be misleading. 2017-10-07 13:32:11 -06:00
Gregory Nutt
ea9d377cbc Remove some old OS test result files. 2017-10-07 12:45:01 -06:00