This commit fixes#7857 and #7193 by saving Wi-Fi parameters and
set them at once, avoiding unknown behaviors of the Wi-Fi driver.
This commit also enables setting the auth of the STA/softAP modes
while connecting to/providing the wireless network.
RISCV has a modular instruction set. It's hard to define cpu-model to support all toolchain.
For Zig, cpu model is this formal: generic_rv[32|64][i][m][a][f][d][c]
For Rust, cpu model is this formal: riscv[32|64][i][m][a][f][d][c]
So, it's better to map the NuttX config to LLVM builtin cpu model, these models supported by
all LLVM based toolchain.
Refer to : https://github.com/llvm/llvm-project/blob/release/15.x/llvm/lib/Target/RISCV/RISCV.td
These models can't cover all implementation of RISCV, but it's enough for most cases.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This has been a long issue for me as it results in random crashes when
asynchronous events occur when the idle process is active.
The problem is that the kernel cannot access user memory, because the CPU
status prevents it.
Current Toolchain.defs set the compile flags directly, it's OK for
target specified gcc toolchain.
But some LLVM based toolchains (Rust/Zig etc) use single toolchain to handle all supported paltform.
In this patch, arch level Toolchain.defs export standard LLVM style arch flags, and let <Lang>.defs to map them into internal style,
This will simplify the intergration of non-c language.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
arm-none-eabi-gcc 12.2.0 gives the following warnings:
error: 'primask' is used uninitialized
error: 'primask' may be used uninitialized
We use Werror and the file is indirectly included in different
places. I suggest telling the compiler to ignore these warnings
since primask is initialized on the first assembly line.
This is the only problem I encountered so far when upgrading the compiler.
SPI transfers are dynamically determined to use DMA or not.
The flag to judge is removed in a previous simple refactoring commit.
Revert the logic and fix an issue that SPI transfer fails.
Choose a divider value that matches the description provided within
the same header file.
Include stddef.h to fix compiler errors because NULL is not defined.
Make logs print protocol, vid and pid consistently, (decimal hex hex).
* Remove the 'COEXISTENCE' suffix from Wi-Fi's STA + SoftAP mode.
Coexistence usually refers to Wi-Fi + BLE, instead of Wi-Fi's
operation mode;
* Remove commented debug code;
* Remove outdate function descriptions;
Initially supporting ESP32-C3 chip, to be followed by other RISC-V-based
chips from Espressif.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
1) Wi-Fi driver libs from Espressif ESP-IDF release/v5.0;
2) Station mode only;
3) WPA2-PSK and WPA3-SAE enabled;
Not yet supported (WIP):
- SoftAP mode;
- 802.11k, 802.11v and 802.11R;
- Power Save mode;
- BLE Coexistance;
This commit adds support for dead time delay to SAMv7 PWM driver. The
dead time can be used to delay an active PWM output at the begining
of the period. This can be used for H bridge control for example.
The values are to be set from the application level. It is required
to allow config option PWM_DEADTIME in order to support dead time delay.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
add arm64_serialinit/arm64_earlyserialinit function prototype
to arm64_internal.h as common function for arm64 based chip.
Testing with ostest in SP and SMP
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Hardware flow control for serial requires the usage of DMAC channels
which is not yet supported for SAMv7 MCU. However the same config option
CONFIG_SERIAL_IFLOWCONTROL is also used for USB CDC/ACM flow control which
works well. Therefore the warning message should be raised only if
flow control is configured for USART driver and not for USB CDC/ACM.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
A list of breaking changes:
- SoftDevice libraries was renamed and libaries are now cmpatible with all platfroms with a given faimily.
- The random number generator was decoupled from the controller and must now be provided by the user.
We use arc4random_buf NuttX API for this.
- sdc_support_ API must be called before sdc_cfg_set()
- update public API terms to Bluetooth Core Specification v5.3 (mainly change slave/master to central/peripheral)
NuttX NRF52 configuration options properly updated.
- BLE features are supported only if the proper BLE role is selected
- sdc_hci_evt_get() and sdc_hci_data_get() have been replaced by sdc_hci_get()
If transfer is restarted in irq handler the interrupts shall be
cleared before the start bit is set in control register. This is
to avoid ints being accidentally cleared before they are handled leading
to timeout error.
In spi_irq handler the data is written into txfifo and transfer
is started before the TXDONE interrupt is cleared. If the bus/memory
access is in some cases delayed, the spi transfer may have been
finished already before the interrupt register is cleaned for the
transfer. This leads the early arrived interrupt to be just removed
and never handled, which would cause a timeout error.
This patch moves the clearing of the interrupt to the place before
the tx is started, so the interrupt is not missed in above cases.
Summary:
Adding virtual evaluate platform FVP. This FVP board configuration
will be used to emulate generic ARM64v8-R (Cotex-R82)series hardware
platform and provide support for these devices:
- GICv3 interrupt controllers for ARMv8-r
- PL011 UART controller(FVP)
Note:
1. ostest is PASSED at fvp ( single core and SMP)
2. the FVP tools can be download from ARM site, please check FVP
board readme.txt
TODO: merge PL011 UART driver to common place
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
This commit adds configurable fault protection to SAMv7 PWM driver.
The fault input can be used from peripherals as ADC or GPIO inputs.
Inputs from GPIO have configurable polarity (high or low). The PWM output
is automatically set to zero if fault input is active and restored
if fault input is not actived.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary
Different ARM64 Core will use different Affn define, the mpidr_el1
value is not CPU number, So we need to change CPU number to mpid
and vice versa, the patch change the mpid define into platform
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary
For ARM64 architecture, the arch timer is 64-bit,
the CONFIG_SYSTEM_TIME64 need to be enabled just like
x86_64 and risc-v 64
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary
VMPIDR_EL2 holds the value of the Virtualization Multiprocessor ID.
From architecture manual of AArch64, the behave is:
-reading register MPIDR_EL1 in EL2, it's return real MPIDR_EL1
-reading register MPIDR_EL1 in EL1, it's return VMPIDR_EL2
So since NuttX for SMP is running at EL1 to read MPIDR_EL1 for
identify CPU id, it's need to set VMPIDR_EL2 to MPIDR_EL1 for
every CPU at boot EL2 stage.
For some platform, the bootloader or hypervisor will do that at
the EL2 stage, but not all.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary:
Adding armv8-r(Cortex-R82) support and modify some common code to
fit the change, the change including:
1. ARM Single Security State Support, ARMv8-R support only single
security state, and some GIC configure need to change and fit
2. For ARMv8-R, only have EL0 ~ EL2, the code at EL3 is not necessary
and system register for EL3 is not accessible(gcc will failed when
access these registers)
3. add base MPU configure for the platform.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary:
The aarch64 have EL0~El3 execute level and NS/S (security state),
the NuttX should be execute at EL1 in NS(ARmv8-A) or S(ARmv8-R)
state. but booting NuttX have different ELs and state while with
different platform, if NuttX runing at wrong ELs or state it will
be not normal anymore. So we need to print something in arm64_head.S
to debug this situation.
Enabling this option will need to implement up_earlyserialinit and
up_lowputc functions just you see in qemu, if you not sure,
keeping the option disable.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summory
This Power State Coordination Interface (PSCI) defines a standard
interface for power management. the PCSI need to implement handling
firmware at EL2 or EL3 for ARM64. the PSCI maybe not applicable
for arm core without PCSI firmware interface implement.
Add configure option for it.
Note:
1. ostest is PASSED at qemu and fvp ( single core and SMP)
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
- Add retry timeout to prevent inifinite loop
- Change the register operation of power control
- Add exclusive control by semaphore into some functions
- Add short delay until power control is reflected
