Gregory Nutt
7258f1cbfc
IP forwarding: Move to separate directory. A few fixes from early testing; In TUN driver, do all polling on worker thread. Otherwise, the stack gets very deep.
2017-07-07 18:33:06 -06:00
Gregory Nutt
8d81b35c44
network: Correct some issues that prevent TCP from working correctly when both IPv4 and IPv6 are enabled.
2017-07-07 08:50:01 -06:00
Gregory Nutt
b5d7187df6
IP forwarding design simplication; might save some memory. Also fix some compile issues introduce with last commit in MULTINIC configration.
2017-07-06 16:19:10 -06:00
Gregory Nutt
b297066eb9
IP Forwarding: Add IPv4 packet forwarding logic. Initial commit is an untested clone of the IPv6 forwarding logic with a few minor logic changes for IPv4.
2017-07-05 15:12:29 -06:00
Gregory Nutt
edf16c5805
IP forwarding: In check it the Ethernet MAC address is in the ARP/Neighbor table, add an additional check to skip in the case of CONFIG_NET_MULTILINK and the devices is not an Ethernet device.
2017-07-05 12:40:26 -06:00
Gregory Nutt
31f832d8c5
IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic.
2017-07-05 11:01:16 -06:00
Gregory Nutt
c0c275c8fc
IP forwarding. Adds a little more structure to handle passing packets received on one network device to another network device. Logic is still incomplete.
2017-07-04 10:19:52 -06:00
Gregory Nutt
83a875f394
IP forwarding: Add some fragments of TCP forwarding logic.
2017-07-03 15:58:01 -06:00
Gregory Nutt
5a8668b362
6LoWPAN TCP: Fix more ACK handling, fix some callback flag settings. Now the TCP test appears fully functional on 6LoWPAN.
2017-06-25 13:00:42 -06:00
Gregory Nutt
3203f0a93a
6LoWPAN TCP: Major re-architecting of TCP logic to properly handle TCP stuf like ACKs and TPC windowing which were not properly covered in the initial design. Still does not work; hangs waiting of ACKs.
2017-06-24 16:00:41 -06:00
Gregory Nutt
96af668ab8
6LoWPAN: Handle case where the local address is zero (listen socket)
2017-06-24 11:57:59 -06:00
Gregory Nutt
01b0a56371
TCP: tcp_input() now receives IP domain as an input parameter vs. deriving from the IP header length.
2017-05-25 08:02:08 -06:00
Masayuki Ishikawa
32a638cdfe
TCP: Fix tcp_findlistner() in dual stack mode
...
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
2017-05-25 16:54:19 +09:00
Gregory Nutt
56c8456ff0
Update some comments.
2017-05-16 07:38:57 -06:00
Gregory Nutt
914c5dad0c
TCP: An RST recevied suring the 3-way handshake requires a little more clean-up
2017-05-15 08:10:43 -06:00
Gregory Nutt
aa57fb159d
TCP: Send RST if applicaiton 'unlistens()' before we complete the connection sequence.
2017-05-14 13:30:59 -06:00
Gregory Nutt
8acfea1197
Fix some typos
2017-05-14 12:14:31 -06:00
Gregory Nutt
d339ba9e0e
TCP: Fix some potential error conditions that could result from deferring the connection until the full 3-way handshake has completed.
2017-05-14 10:56:25 -06:00
Simon Piriou
8dc7f6d79e
tcp: wait for 3-Way Handshare before accept() returns
2017-05-14 09:08:32 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Gregory Nutt
d5207efb5a
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1
Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB
2017-04-20 14:53:30 -06:00
Gregory Nutt
7cb34d969d
6loWPAN: More fixes from early debug.
2017-04-03 15:25:36 -06:00
Gregory Nutt
1b6630ee75
6loWPAN: Fix compile errors and warnings when building the complete 6loWPAN configuration.
2017-04-02 17:46:22 -06:00
Gregory Nutt
76406af71b
6loWPAN: Add support for sendto()
2017-04-02 11:15:46 -06:00
Gregory Nutt
732f0855c6
6loWPAN: Fleshes out framwork for IEEE802.15.4 send. But still has some gaping holes.
2017-03-31 15:09:07 -06:00
Jussi Kivilinna
cd3c9634c8
Add user-space networking stack API (usrsock)
...
User-space networking stack API allows user-space daemon to
provide TCP/IP stack implementation for NuttX network.
Main use for this is to allow use and seamless integration of
HW-provided TCP/IP stacks to NuttX.
For example, user-space daemon can translate /dev/usrsock
API requests to HW TCP/IP API requests while rest of the
user-space can access standard socket API, with socket
descriptors that can be used with NuttX system calls.
2017-03-31 08:58:14 -06:00
Gregory Nutt
64933246c3
6loWPAN: Tie 6loWPAN send into common socket send logic.
2017-03-28 14:08:54 -06:00
Gregory Nutt
ba2b345990
Remove a few remaining use of the obsolteted 'Compilation Switches' program section
2017-01-22 08:57:18 -06:00
Gregory Nutt
9f7d332028
Minor changes from the review of the last PR
2017-01-18 07:32:27 -06:00
Pascal Speck
2e074ca4f9
- Fixed some issues that prevented ipv6 to work with ipv4 enabled.
2017-01-18 10:57:15 +01:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
2d057c28c8
net: Disable priority inheritance on all semaphores used for signaling
2016-11-03 12:17:02 -06:00
Gregory Nutt
9c3bade7b4
net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck.
2016-08-30 07:59:57 -06:00
Gregory Nutt
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
2016-06-20 08:57:08 -06:00
Jakub Łągwa
338b915008
While working with version 7.10 I discovered a problem in TCP stack that could be observed on high network load. Generally speaking, the problem is that RST flag is set in unnecessary case, in which between loss of some TCP packet and its proper retransmission, another packets had been successfully sent. The scenario is as follows: NuttX did not receive ACK for some sent packet, so it has been probably lost somewhere. But before its retransmission starts, NuttX is correctly issuing next TCP packets, with sequence numbers increasing properly. When the retransmission of previously lost packet finally succeeds, tcp_input receives the accumulated ACK value, which acknowledges also the packets sent in the meantime (i.e. between unsuccessful sending of lost packet and its proper retransmission). However, variable unackseq is still set to conn->isn + conn->sent, which is truth only if no further packets transmission occurred in the meantime. Because of incorrect (in such specific case) unackseq value, few lines further condition if (ackseq <= unackseq)is not met, and, as a result, we are going to reset label.
2016-06-20 06:55:29 -06:00
Gregory Nutt
7d0950bb22
net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors.
2016-06-12 07:09:37 -06:00
Gregory Nutt
f4fcdcdb4d
net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-11 17:37:21 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
86b79b33cf
Reserver the name 'err' for other purposes
2016-06-11 14:40:07 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
c98f00a93b
Update comments; trivial addtion to a document.
2016-06-10 09:36:59 -06:00
Gregory Nutt
4f208600aa
Replace confusing references to uIP with just 'the network'
2016-05-30 09:31:44 -06:00
Gregory Nutt
2dd9777c7e
Fix a backward conditional test introduced with the last commit
2016-03-20 09:58:07 -06:00
Gregory Nutt
00b44959ea
TCP poll: TCP poll events can really only being processed when the poll from the correct device is received.
2016-03-20 08:39:15 -06:00
Gregory Nutt
4639cdd894
TCP timeouts: Fix some logic when there are multiple network interfaces. In this case, TCP timeout events can really only being processed when the poll from the correct device is received.
2016-03-20 08:19:00 -06:00
Gregory Nutt
2c95fef501
Remove some empty code section comments
2016-02-26 07:35:55 -06:00
Gregory Nutt
8db55f6493
Back out most of previous commit
2016-02-26 06:45:37 -06:00
Gregory Nutt
0b441ff1f4
net/: Add basic IEEE 802.15-4 socket support
2016-02-25 14:01:22 -06:00
Gregory Nutt
0fb035f76b
Standardize some naming in code section comments
2016-02-21 18:09:04 -06:00
Andrew Webster
49e5cc5a6f
TCP: check for an active connection before cleaning it up
...
If there is no active connection (e.g. it is waiting in accept), then
the connection object, which doesn't yet exist, should not be cleaned
up when the socket is closed.
2016-01-22 16:22:09 -06:00
Andrew Webster
5e3023bef1
TCP: return from write when there is no buffer space
...
During a write, if there is no more buffer space for the user data,
return the amount that was written instead of waiting until there
is free space. If nothing has been written yet, then block as before.
This solves a deadlock that occurs if the user data is too large to
fit in the available buffer: the write thread will block before any
data is added to the write queue, leaving no possibility that more
buffers will free up when they are ACKed (since they have not yet been
sent). The write thread will then block forever and hold all of the
buffers.
2016-01-22 16:19:20 -06:00
Andrew Webster
cdd187a7f3
TCP: check for sndcb before using it
2016-01-22 15:54:45 -06:00
Andrew Webster
df211ee46a
TCP: add writable check during poll
...
When a poll requesting POLLOUT happens, the poll should return
immediately if a write will not block. This change adds that, as
opposed to the old behaviour of blocking until a timer from the
Ethernet driver eventually triggers the poll to complete.
This is only implemented for buffered TCP. Unbuffered TCP should
behave as before.
2016-01-22 15:52:14 -06:00
Andrew Webster
99f5fcda70
iTCP: use lowlevel syslog to avoid infinte recursion
...
If stdout is a socket (e.g. telnet), then the debug message will cause
more TCP data to be sent, which generates another message, and so on
2016-01-22 15:41:48 -06:00
Gregory Nutt
f348e68069
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
Gregory Nutt
6209c51206
net/: More clean-up of spacing/alignment issues
2015-10-08 15:10:04 -06:00
Gregory Nutt
0b12dbf95d
Fix some spacing problems
2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0
Standardize naming used for public data and function groupings
2015-10-02 16:30:35 -06:00
Gregory Nutt
d700793077
Fix a compile error when IPv6 is enabled
2015-09-07 16:34:25 -06:00
Alan Carvalho de Assis
f10a103108
Fix tcp_send_unbuffered when NET_ETHERNET is not defined.
2015-09-07 13:31:35 -06:00
Gregory Nutt
9c66bde5b0
Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1
2015-09-05 09:10:48 -06:00
Gregory Nutt
14297afb83
Cosmetic fix to break up long line
2015-09-03 07:33:50 -06:00
Gregory Nutt
36f4d0e9fc
Fix a error in some comments
2015-09-02 20:03:28 -06:00
Gregory Nutt
0e2986f131
net/tcp: The logic that binds a specific networkd device to a connection was faulty for the case of multiple network devices. On bind(), the local address should be used to associate a device with the connection (if the local address is not INADDR_ANY); On connect(), the remote address should be used (in case the local address is INADDR_ANY). On accept(), it does not matter but the remote address is the one guarenteed to be available.
2015-09-02 19:48:31 -06:00
Gregory Nutt
9fcad39a45
Trivial typo fix
2015-09-02 10:09:33 -06:00
Gregory Nutt
63071a563a
Costmetic changes
2015-08-27 10:38:43 -06:00
Gregory Nutt
b1e09d4847
net/socket and net/tcp: Fix a problem in whent there are multiple network devices. Polls were being sent to all TCP sockets before. This is not good because it means that packets may sometimes be sent out on the wrong device. That is inefficient because it will cause retransmissions and bad performance. But, worse, when one of the devices is not Ethernet, it will have a different MSS and, as a result, incorrect data transfers can cause crashes. The fix is to lock into a single device once the MSS is locked locked down.
2015-08-27 09:06:46 -06:00
Gregory Nutt
3bcdb218ff
Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on
2015-08-27 08:39:17 -06:00
Gregory Nutt
007aabc46f
Fix a badly formatted comment
2015-08-26 19:18:04 -06:00
Anton D. Kachalov
b125c36849
Field `d_sndlen' is unsigned. It is always >= 0.
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-26 00:16:52 +03:00
SaeHie Park
e983e547e1
Networking: Correct return value from psock_tcp_accept(). From SaeHie Park
2015-08-25 07:15:21 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
8f7752d956
Networking: Modify how callback structures are stored to avoid another potential use of a stal pointer.
2015-06-03 08:11:57 -06:00
Gregory Nutt
33085cb309
Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert.
...
The solution here is to eliminate the device devices semaphore altogether. This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
2015-05-31 08:34:03 -06:00
Gregory Nutt
6687e156e6
Revamp last change. IFF_UP only required when allocating callback, not freeing.
2015-05-30 21:13:58 -06:00
Gregory Nutt
8b029fbbee
TCP networking: Hook the network monitor into the device event notification logic
2015-05-30 11:29:47 -06:00
Gregory Nutt
933b95ac80
Forgot to add a file in the last commit
2015-05-30 09:17:46 -06:00
Gregory Nutt
04a661a97c
TCP networking: Add support for network driver events
2015-05-30 09:12:27 -06:00
Gregory Nutt
ab50e9d04d
Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST
2015-05-29 15:16:11 -06:00
Gregory Nutt
e672bcebfd
UDP Networking: Add support for device event notification for UDP transfers.
2015-05-29 10:21:06 -06:00
Gregory Nutt
b5c005d5a4
Merge remote-tracking branch 'origin/master' into multinic
...
Conflicts:
nuttx/ChangeLog
2015-05-28 19:30:48 -06:00
Gregory Nutt
e81f279315
Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events.
2015-05-28 12:01:38 -06:00
Gregory Nutt
01d176af76
net_startmonitor.c always returned zero. In the case where a socket has already been closed, it correctly handled the disconnetion event but still returned OK. Returning OK causes the callers of net_startmonitor to assume that the connection was okay, undoing the good things that net_startmonitor did and causing the socket to be marked as connected. This behavior was noted by Pelle Windestam.
2015-05-28 08:23:51 -06:00
Gregory Nutt
d6c3ed1c6f
Networking: Fixes an important TCP bug: 16-bit flags was being converted to 8-bits in a few locations, causing loss of status indications
2015-05-27 17:17:42 -06:00
Gregory Nutt
1f3ee83134
Increase the size of the number of bytes sent from uint16_t to uint32_t in order to avoid TCP errors with long sessions. For exmple:
...
int hello_main(int argc, char *argv[])
{
uint32_t i;
for(i = 0; i < 65536; i++)
{
printf("Hello, World!!\n");
}
printf("press any key!!\n");
if (getchar()=='t')
return 0;
else
return 1;
}
When ran in a Telnet session, the "press any key" is not displayed because the tcp session closed unexpectedly with:
tcp_input: ERROR: conn->sndseq xx, conn->unacked xx"
This is fixed by increasing the width of conn->sent to 32-bits to prevent overflow.
From Rony XLN
2015-05-11 07:14:25 -06:00
Gregory Nutt
a82b8fd71f
Networking: Fix several build errors/warning with IPv4 + IPv6 + multiple networks are enabled.
2015-02-10 06:54:10 -06:00
Gregory Nutt
b756df982d
net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing.
2015-02-09 18:15:34 -06:00
Gregory Nutt
a07a764d42
ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).
2015-02-02 13:44:31 -06:00
Gregory Nutt
6d7891c4de
Fix compile issues with configs/sim/nettest
2015-02-01 12:00:30 -06:00
Gregory Nutt
52f9a2744c
Should fix another warning reported by Travis
2015-01-30 08:57:35 -06:00
Gregory Nutt
a438784054
Forgot to add a file in the last commit
2015-01-30 07:28:30 -06:00
Gregory Nutt
5736cf10af
Networking: Separate TCP poll logic out of net/sockets/net_poll.c and move it into the new net/tcp/tcp_netpoll.c.
2015-01-30 07:25:01 -06:00
Gregory Nutt
de91d34a19
Networking: Separate out UDP poll logic from socket/net_poll.c into a new udp/udp_netpoll.c; Create a skeleton local/local_netpoll.c for future poll support on Unix domain sockets.
2015-01-30 07:09:25 -06:00
Gregory Nutt
ccc72edc0b
Networking: Add UDP read-ahead support and support for poll/select on UDP sockets. From Macs N.
2015-01-30 06:08:26 -06:00
Gregory Nutt
9c2af5317f
Merge remote-tracking branch 'origin/master' into afunix
2015-01-28 12:03:43 -06:00
Gregory Nutt
371a9fd84c
Networking: Fix another deadlock condition. tcp_write_buffer_alloc() calls sem_wait() with network locked. That worked if CONFIG_NET_NOINTS was not defined because interrupts are automatically restored when the wait happens. But with CONFIG_NET_NOINTS=y, the wait blocks with the network locked -- bad style and also can lead to a deadlock condition
2015-01-28 11:56:11 -06:00
Gregory Nutt
5f9837dcc8
Merge remote-tracking branch 'origin/master' into afunix
...
Conflicts:
nuttx/ChangeLog
2015-01-27 21:47:12 -06:00
Gregory Nutt
c4bd6f52b5
Networking: The are issues with the TCP write-ahead buffering if CONFIG_NET_NOINTS is enabled: There is a possibility of deadlocks in certain timing conditions. I have not seen this with the Tiva driver that I have been users but other people claim to see the issue on other platforms. Certainly it is a logic error: The network should never wait for TCP read-ahead buffering space to be available. It should drop the packets immediately.
...
This was fixed by duplicating most of the IOB interfaces: The versions that waited are still present (like iob_alloc()), but now there are non-waiting verisons of the same interfaces (like iob_tryalloc()). The TCP read-ahead logic now uses only these non-waiting interfaces.
2015-01-27 21:23:42 -06:00
Gregory Nutt
f756545eb0
Networking: Add local Unix domain socket accept logic
2015-01-25 16:27:25 -06:00
Gregory Nutt
90e59217c6
Networking: Move TCP specific logic out of net/socket/accept.c to net/tcp/tcp_accept.c; add hooks for local, Unix doamin sockets
2015-01-25 15:46:05 -06:00
Gregory Nutt
0def771c8d
Networking: Move TCP specific logic out of net/socket/accept.c to net/tcp/tcp_accept.c; add hooks for local, Unix doamin sockets
2015-01-25 15:45:51 -06:00
Gregory Nutt
f4bb7f14e1
Networking: Clean up network status collection and presentation for IPv6
2015-01-24 08:26:12 -06:00
Gregory Nutt
c77426e550
Cosmetic changes to comments; refresh configuration
2015-01-22 14:46:36 -06:00
Gregory Nutt
eac4ea7ae5
Networking: Back out a previous change. It is incorrect
2015-01-22 12:10:16 -06:00
Gregory Nutt
46fc574f0f
Forgot to remove some debug instrumentation in the last commit
2015-01-22 10:35:11 -06:00
Gregory Nutt
7106469191
Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic
2015-01-22 10:09:10 -06:00
Gregory Nutt
5e23a855ec
More typos in debug statements
2015-01-21 10:32:59 -06:00
Gregory Nutt
354bc626ab
Fix a typo introduced in the last commit
2015-01-21 10:31:18 -06:00
Gregory Nutt
3202819328
IPv6 -- various fixed from problems found in testing
2015-01-21 10:29:18 -06:00
Gregory Nutt
5d31687e75
Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family
2015-01-20 18:14:09 -06:00
Gregory Nutt
2842b5c5d6
Networking: Fix some problems with debug is enabled; fix a warning
2015-01-19 10:16:37 -06:00
Gregory Nutt
eb3c6e8390
Networking: Some fixes for compilation when both IPv4 and IPv6 are enabled
2015-01-18 09:23:22 -06:00
Gregory Nutt
f7663ef0ab
Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled
2015-01-18 08:56:05 -06:00
Gregory Nutt
ea52bda8f9
Networking: Add IPv6 suppport to TCP application level sending logic
2015-01-17 18:18:19 -06:00
Gregory Nutt
d8b046f2fb
Networking: Fix a simple IPv6 compile error
2015-01-17 17:48:15 -06:00
Gregory Nutt
86f617cc88
Networking: Straighten up use if IPv6/IPv4 in TCP connection logic
2015-01-17 17:07:54 -06:00
Gregory Nutt
b187b4f381
Networking: Straighten up use if IPv6/IPv4 in TCP connection logic
2015-01-17 15:17:35 -06:00
Gregory Nutt
f7681dbb43
Networking: Detangling IPv6/4 logic in UDP connection structures
2015-01-17 14:13:56 -06:00
Gregory Nutt
94f9312150
Networking: Save the IP domain in the connection structure
2015-01-17 13:07:48 -06:00
Gregory Nutt
e2933ca4cc
Networking: Oops. Forgot to add a couple of files that were part of an earlier commit
2015-01-17 09:35:27 -06:00
Gregory Nutt
820509eadc
Networking: Fix accept() so that it returns the correct IP address for the selected socket IP domain.
2015-01-17 09:27:05 -06:00
Gregory Nutt
4ad5998db3
net/socket and net/tcp: When we are ready to receive data or when we have outgoing data ready to be sent, we need to the notify the appropriate device driver of this condition. The notifying socket will be configured as either PF_INET or PF_INET6 and must look up the correct driver using the correct IP domain.
2015-01-17 08:33:14 -06:00
Gregory Nutt
2c251d845c
include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received.
...
net/socket, net/tcp, net/udp: Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet. This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934
Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary
2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6
Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value.
2015-01-16 15:03:10 -06:00
Gregory Nutt
2663538b0a
Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other.
2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6
Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t.
2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4
Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections
2015-01-16 10:01:54 -06:00
Gregory Nutt
5b45605991
Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp()
2015-01-15 15:55:52 -06:00
Gregory Nutt
630366272a
Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header.
2015-01-15 15:06:46 -06:00
Gregory Nutt
60e50ff3b5
Networking: More IPv6 detanglement
2015-01-15 13:08:28 -06:00
Gregory Nutt
a7ce1279f9
Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics.
2015-01-14 16:10:38 -06:00
Gregory Nutt
a6a9452c05
net/tcp/tcp_conn.c: Fix a logic error when CONFIG_NETDEV_MULTINIC is selected: net_unlock(flags) will be called will an uninitialized variable (2015-01-03).
2015-01-02 12:03:08 -06:00
Gregory Nutt
b36dbe1d89
Add logic to netdev_findbyaddr() to return the correct network device for the case where a broadcast address is used. This change caused trivial ripples through other files because additional parameters are required for netdev_findbyaddr() when CONFIG_NET_MULTINIC
2014-11-23 11:00:22 -06:00
Gregory Nutt
dc7a45ecf8
Extensions to ECP conneciton structure for the case of multiple networks. See additional comments regarding the similar change for UDP
2014-11-22 10:46:37 -06:00
Gregory Nutt
80fc094734
Make tcp_listener static scope; it is not used outside of tcp_conn.c
2014-11-22 07:14:17 -06:00
Gregory Nutt
38754a3466
Completes basic changes to support per-device/per-link TCP receive window size
2014-11-16 11:15:21 -06:00
Gregory Nutt
859748a94e
Completes conversion of CONFIG_NET_BUFIZE to CONFIG_NET_ETH/SLIP_MTU
2014-11-16 09:22:38 -06:00
Gregory Nutt
2e55db369d
Network: All logic will now handle varialbe length link layer protocol headers within incoming packets. This permits use of multiple network interfaces with differing data links. For example, ETHERNET + SLIP
2014-11-15 13:13:23 -06:00
Gregory Nutt
0abe6c66d7
Update everything under nuttx/net to use the corrected syslog interfaces
2014-10-08 10:48:11 -06:00
Gregory Nutt
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
Gregory Nutt
6e04518e4a
If CONFIG_NET_ARP_SEND is enabled, then all ICMP, TCP, and UDP send operations will call arp_send() before attempting the real send operation. arp_send() will check if the the IP address mapping is in the ARP table and, if not send ARP requests periodically until it is. This eliminates losing the first outgoing message because there is not mapping in the ARP table.
2014-08-18 16:22:14 -06:00
Gregory Nutt
caba61999a
Remove CONFIG_DISABLE_CLOCK
2014-08-07 12:35:24 -06:00
Gregory Nutt
e89eac6365
NET: Fix a few problems after big merge of network reorganization
2014-07-06 17:58:36 -06:00
Gregory Nutt
73f3ecf7e2
NET: Rename network interrupt event flags more appropriately: TCP_, UDP_, ICMP_, or PKT_ vs UIP_
2014-07-06 17:22:02 -06:00
Gregory Nutt
a251259f90
NET: Rename some non-configurable constants UIP_ to IP_ or TCP_
2014-07-06 16:19:26 -06:00
Gregory Nutt
b77fda2c95
NET: Rename TCP state values: UIP_ -> TCP_
2014-07-06 16:10:26 -06:00
Gregory Nutt
1f11a452dd
NET: Add a few missing configuration options to the Kconfig files
2014-07-06 13:04:27 -06:00
Gregory Nutt
2d52d70d4c
NET: Move private definitions from include/nuttx/net/tcp to net/tcp/tcp.h
2014-07-06 12:34:27 -06:00
Gregory Nutt
9e87ab90b8
NET: Move private definitions from include/nuttx/net/arp.h to net/arp/arp.h
2014-07-06 11:05:28 -06:00
Gregory Nutt
c5fc24e110
NET: Standardize naming of all protocal header lengths
2014-07-05 13:04:48 -06:00
Gregory Nutt
60246e613b
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
Gregory Nutt
a6b39d1879
NET: in-progress change... don't use
2014-07-04 16:38:51 -06:00
Gregory Nutt
cce35ce975
NET: More renaming
2014-07-04 15:40:49 -06:00
Gregory Nutt
8e9df8ade0
NET: Misc naming clean-up
2014-07-02 17:23:25 -06:00
Gregory Nutt
85f42044df
NET: Rename uip_dataevent to tcp_data_event
2014-06-30 19:17:22 -06:00
Gregory Nutt
b54d366efd
NET: Remove uip_restart()
2014-06-30 19:14:01 -06:00
Gregory Nutt
77330679d4
NET: Rename uip_mss to tcp_mss
2014-06-30 19:09:23 -06:00
Gregory Nutt
7dd04db1d2
NET: Rename uip_nextXYZconn to XYZ_netconn
2014-06-30 18:03:58 -06:00
Gregory Nutt
ad3e39e53d
NET: Rename uiphdr_ipaddr_copy to net_ipaddr_hdrcopy, uip_ip4addr_conv to net_ip4addr_conv32, and uip_ethaddr_cmp to eth_addr_cmp
2014-06-29 13:20:00 -06:00
Gregory Nutt
c362f21815
NET: Rename uip_ipaddr* to net_ipaddr*
2014-06-29 13:11:08 -06:00
Gregory Nutt
fa68fcc843
NET: Rename uip_callback_s to devif_callback_s
2014-06-29 12:59:34 -06:00
Gregory Nutt
c179369a47
Rename static functions from uip_* to something more appropriate. Globally scoped functions will take more work
2014-06-28 19:26:16 -06:00
Gregory Nutt
8e706eb4ff
Rename many functions in net/devif from uip_* to devif_*
2014-06-28 18:36:09 -06:00
Gregory Nutt
5790c94ba3
Rename net/uip to net/devif. Rename uip/uip.h to devif/devif.h
2014-06-28 18:07:02 -06:00
Gregory Nutt
76fa58ee00
Move all socket-related files from net/ to net/socket. Move net/net.h to net/socket/socket.h
2014-06-28 17:25:18 -06:00
Gregory Nutt
64c8dba8c4
NET: Create net/sockets directory and hook into the build/configuration system
2014-06-28 16:41:55 -06:00
Gregory Nutt
50b749a636
Clean-up naming associated with network checksums
2014-06-27 17:51:32 -06:00
Gregory Nutt
fce2a79abd
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
953764181e
NET: Move net/netdev*.c to net/netdev/netdev*.c
2014-06-27 09:56:45 -06:00
Gregory Nutt
64ba574ecc
Move files to net/utils; make appropriate name changes, most for uip_lock to net_lock
2014-06-26 14:23:21 -06:00
Gregory Nutt
d120befd39
NET: Move routing table functions to net/route
2014-06-26 13:02:08 -06:00
Gregory Nutt
e1091251e6
NET: Move statistcs from uip.h to new netstats.h to remove nasty circular inclusion problem.
2014-06-26 09:32:39 -06:00
Gregory Nutt
473ba2ba6c
NET: Fix an include file ordering problem when CONFIG_NET_STATISTICS=
2014-06-26 07:29:16 -06:00
Gregory Nutt
579ee6f573
Clean-up packet socket naming
2014-06-25 10:34:52 -06:00
Gregory Nutt
f57024406a
Clean up IGMP naming
2014-06-25 09:52:36 -06:00
Gregory Nutt
04985d6d1e
Clean up all TCP-related naming
2014-06-24 18:12:49 -06:00
Gregory Nutt
fabcb6d37e
TCP Read-Ahead: Convert to use I/O buffer chains
2014-06-24 15:38:00 -06:00
Gregory Nutt
e9a588c398
Add throttle support to the I/O buffer logic
2014-06-24 11:53:19 -06:00
Gregory Nutt
5d1f8180d4
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
Gregory Nutt
626469e30c
Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h
2014-06-24 08:53:28 -06:00
Gregory Nutt
38c6e41e8e
Separate net/net_send_buffered.c and net/net_send_unbuffered.c to net/tcp/tcp_send_buffered.c, net/tcp/tcp_send_unbuffered.c, and pkt/pkt_send.c
2014-06-24 08:03:44 -06:00
Gregory Nutt
7330704d36
CONFIG_NET_PKT is compatible with current TCP writebuffering logic because the share too much code; move sending of packet socket data from net_send_unbufferer.c to a new uip/uip_pktsend.c file for consistency
2014-06-23 19:25:16 -06:00
Gregory Nutt
30843cf46d
TCP write buffering: Add an offset to buffer dumping logic
2014-06-23 09:40:17 -06:00
Gregory Nutt
963f8f49c5
TCP write buffering: Add length to buffer dumping instrumentation
2014-06-23 07:31:55 -06:00
Gregory Nutt
6f1651d5f2
TCP write buffering: Extend and fix some buffer dumping logic
2014-06-22 18:53:18 -06:00
Gregory Nutt
d642616c5b
TCP write buffering: Fix an error in the trim logic
2014-06-22 16:25:26 -06:00
Gregory Nutt
356d25b503
First cut at conversion of write-buffering to use I/O buffer chaings (IOBs)
2014-06-22 11:27:57 -06:00
Gregory Nutt
2805582151
net: Add net/tcp/tcp.h; rename uip_tcpwrbuffer_ to tcp_wrbuffer_*
2014-06-21 15:23:39 -06:00
Gregory Nutt
b9c6b9b425
Networking: Move relevant parts of net/Kconfig to tcp/Kconfig, udp/Kconfig, and pkt/Kconfig
2014-06-18 11:45:55 -06:00
Gregory Nutt
2244dda41a
Move uip/uip_listen.c to tcp/tcp_listen.c
2014-06-18 10:47:47 -06:00
Gregory Nutt
040837eb6c
Move TCP files from net/uip to net/tcp
2014-06-18 10:21:21 -06:00
Gregory Nutt
143959c1ed
Move TCP files from net/uip to net/tcp
2014-06-18 10:18:53 -06:00
