Summary:
- This commit fixes comments and label in nxtask_assign_pid()
Impact:
- None
Testing:
- Built with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During reviewing sched_lock() in nxtask_assign_pid(),
I noticed that g_pidhash is not protected by a critical section
- Because g_pidhash is accessed in an interrupt context,
it should be protected by a critical section.
- Actually, nxsched_foreach(), nxsched_get_tcb() and so on
use a critical section.
Impact:
- No impact
Testing:
- Tested with spresense:wifi (non-SMP) and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Because this_task() and nxsched_get_tcb() are protected inside the funtcions
- Also, enter_critical_section() is used in nxsched_set_affinity()
Impact:
- No impact
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
let's call either nx_dup/nx_dup2 or file_dup/file_dup2
instead just like other fs api: xxx->nx_xxx->file_xxx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1aacfb9e25dc7b3fcb0345ff7b269b1953a01e5b
1. remove descript management in mqueue, save code size
2. use i_ops instead of i_mqueue to remove the dup logic
Change-Id: Ie88960e50ddcae9c87977c9ad65a45297c663291
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary:
- Calling sched_lock()/unlock() is unnecessary for SMP
because we've been using the critical section API
Impact:
- SMP only
Testing:
- Tested with smp and ostest with the following configurations
- sabre-6quad:smp (QEMU, dev board)
- spresense:smp, spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
use the default testset implement on single core platform
that does not support test-and-set, more flexibility for
SMP drivers(using spinlock) if configured in a single-core mode.
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
the action can't be dynamically allocated in any irq handler
so it's important to let the user extend the number as needed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id30c5d93003e63514c24f2ca0df2f634c4c63c5f
the message can't be dynamically allocated in any irq handler
so it's important to let the user extend the number as needed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia26584c3815bac6cf24de4c88be0844ac8e8fba2
Summary:
- I found potential bugs in pthread_condclockwait.c
- Actually, sched_unlock() and wd_cancel() were misplaced.
- This commit fixes this issue
Impact:
- pthread_cond_clockwait() only
Testing:
- Tested with ostest with the following configs
- sabre-6quad:nsh, sabre-6quad:smp, sim:ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit introduces SP_WFE() and SP_SEV() to be used for spinlock
- Also, use wfe/sev instructions for ARMV7-A to reduce power consumption
Impact:
- ARMV7-a SMP only
Testing:
- sabre-6quad:smp (QEMU, dev board)
- maix-bit:smp, esp32-devkitc:smp, spresense:smp sim:smp (compile only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes global IRQ control logic
- In previous implementation, g_cpu_irqset for a remote CPU was
set in sched_add_readytorun(), sched_remove_readytorun() and
up_schedule_sigaction()
- In this implementation, they are removed.
- Instead, in the pause handler, call enter_critical_setion()
which will call up_cpu_paused() then acquire g_cpu_irqlock
- So if a new task with irqcount > 1 restarts on the remote CPU,
the CPU will only hold a critical section. Thus, the issue such as
'POSSIBLE FOR TWO CPUs TO HOLD A CRITICAL SECTION' could be resolved.
- Fix nxsched_resume_scheduler() so that it does not call spin_clrbit()
if a CPU does not hold a g_cpu_irqset
- Fix nxtask_exit() so that it acquires g_cpu_irqlock
- Update TODO
Impact:
- All SMP implementations
Testing:
- Tested with smp, ostest with the following configurations
- Tested with spresense:wifi_smp (NCPUS=2,4)
- Tested with sabre-6quad:smp (QEMU, dev board)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
sched/signal/sig_timedwait.c:
* nxsig_timedwait(): Fix typo in comment:
"is store din" -> "is stored in"
include/nuttx/signal.h:
* Fix same typo in extern declaration of nxsig_timedwait().
Summary:
- I noticed that Cortex-A SGI can be masked
- We thought the SGI is not maskable
- Although I can not remember how I tested it before
- It actually works as expected now
- Also, fixed the number of remaining bugs in TODO
Impact:
- No impact
Testing:
- Tested with sabre-6quad:smp (QEMU and dev board)
- Add the following code in up_idle() before calling asm("WFI");
+ if (0 != up_cpu_index())
+ {
+ up_irq_save();
+ }
- Run the hello app, you can see "Hello, World!!"
- But nsh will freeze soon because arm_pause_handler is not called.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed waitpid_test stops with lc823450-xgevk:rndis
- The condition was CONFIG_DEBUG_ASSERTION=y
- Actually, the child task sent SIGCHILD but the parent couldn't catch the signal
- Then, I found that nx_waitid(), nx_waitpid() use sched_lock()
- However, a parent task and a child task are running on different CPUs
- So, sched_lock() is not enough and need to use a critical section
- Also, signal handling in nxtask_exithook() must be done in a critical section
Impact:
- SMP only
Testing:
- Tested with ostest with the following configurations
- lc823450-xgevk:rndis (CONFIG_DEBUG_ASSERTION=y and n)
- spresense:smp
- spresense:wifi_smp (NCPUS=2 and 4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- sched_tasklistlock.c was introduced to stabilize NuttX SMP
- However, the current SMP implementation is stable by recent fixes
- So I decided to remove the file finally
Impact:
- SMP only
Testing:
- Tested with ostest with the following configurations
- spresense:smp
- spresense:wifi_smp (NCPUS=2 and 4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed 'pthread_rwlock test' in ostest sometimes stops
- This issue happened with spresense:wifi_smp (NCPUS=4) and sim:smp
- Finally, I found an issue in pthread_join()
- In pthread_join(), sched_lock() is used to avoid pre-emption
- However, this is not enough for SMP
- Because another CPU would continue the pthread and exit sequences
- So we need to protect it with a critical section
Impact:
- Affect SMP only
Testing:
- Tested with ostest with the following configurations
- spresnese:smp
- spresense:wifi_smp (NCPUS=2, NCPUS=4)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Reference here:
https://pubs.opengroup.org/onlinepubs/009695399/functions/timer_create.html
DESCRIPTION
...
Each implementation shall define a set of clocks that can be
used as timing bases for per-process timers. All implementations
shall support a clock_id of CLOCK_REALTIME.
*** If the Monotonic Clock option is supported, implementations shall
support a clock_id of CLOCK_MONOTONIC. ***
...
Change-Id: Ia8e7302ed4a7e9ec11a0059bd68e9674ea942001
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- I noticed that nxsched_merge_pending() is called outside a critical section
- The issue happens if a new rtcb does not hold a critical section
- Actually, global IRQ control is done in nxsched_resume_scheduler() in nxtask_exit()
- However, nxsched_merge_pending() was called after calling nxsched_resume_scheduler()
- This commit fixes the issue by moving nxsched_merge_pending() before the function
- NOTE: the sequence was changed for SMP but works for non-SMP as well
Impact:
- This commit affects both SMP and non-SMP
Testing:
- Tested with ostest with the following configurations
- spresense:wifi_smp (NCPUS=2 and 4)
- spresense:wifi (non SMP)
- sabre-6quad:smp (QEMU)
- esp32-core:smp (QEMU)
- maix-bit:smp (QEMU)
- sim:smp
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
In file included from string/lib_strsignal.c:40:0:
string/lib_strsignal.c: In function ‘strsignal’:
string/lib_strsignal.c:142:12: error: ‘CONFIG_SIG_STOP’ undeclared (first use in this function); did you mean ‘CONFIG_SIG_PIPE’?
case SIGSTOP:
^
string/lib_strsignal.c:142:12: note: each undeclared identifier is reported only once for each function it appears in
string/lib_strsignal.c:147:12: error: ‘CONFIG_SIG_STP’ undeclared (first use in this function); did you mean ‘CONFIG_SIG_STOP’?
case SIGSTP:
Esnure all standard signal number is always defined
Change-Id: I3abce86079ebeba7bab038d7c770efc90b9cffd7
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary:
- I found a deadlock during Wi-Fi audio streaming test plus stress test
- The testing environment was spresense:wifi_smp (NCPUS=4)
- The deadlock happened because two CPUs called up_cpu_pause() almost simultaneously
- This situation should not happen, because up_cpu_pause() is called in a critical section
- Actually, the latter call was from nxsem_post() in an IRQ handler
- And when enter_critical_section() was called, irq_waitlock() detected a deadlock
- Then it called up_cpu_paused() to break the deadlock
- However, this resulted in setting g_cpu_irqset on the CPU
- Even though another CPU had held a g_cpu_irqlock
- This situation violates the critical section and should be avoided
- To avoid the situation, if a CPU sets g_cpu_irqset after calling up_cpu_paused()
- The CPU must release g_cpu_irqlock first
- Then retry irq_waitlock() to acquire g_cpu_irqlock
Impact:
- Affect SMP
Testing:
- Tested with spresense:wifi_smp (NCPUS=2 and 4)
- Tested with spresense:smp
- Tested with sim:smp
- Tested with sabre-6quad:smp (QEMU)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
