This commit aims to enable the use of ROM functions on ESP32.
This is done by creating the required syscall stubs table and adding the missing symbols to the linker script.
These series have the following GPIO ports:
- STM32F03X: A to D, and F
- STM32F05/07/09X: A to F
- STM32G0X: A to F
- STM32L0X: A to E, and H
Signed-off-by: Takumi Ando <t-ando@advaly.co.jp>
added IPV6_RECVHOPLIMIT support so that fd of SOCK_RAW ICMPV6 can obtain ttl
information, some network related tools use this feature.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
utils/net_cmsg.c: In function 'cmsg_append':
utils/net_cmsg.c:82:23: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
82 | msg->msg_control += cmsgspace;
| ^~
cc1: all warnings being treated as errors
Using void pointers in arithmetic operations is a GCC extension, it is
not supported by the standard. Because what is the size of a void ?
compile error log:
common/arm64_arch_timer.c: In function 'arm64_tick_max_delay':
common/arm64_arch_timer.c:178:12: error: conversion from 'long unsigned int' to 'clock_t' {aka 'unsigned int'} changes value from '18446744073709551615' to '4294967295' [-Werror=overflow]
178 | *ticks = UINT64_MAX;
| ^~~~~~~~~~
Signed-off-by: hujun5 <hujun5@xiaomi.com>
At present, the serial drivers qemu_serial.c and serial_pl011.c on the fvp-v8r and qemu platforms in arm64 are duplicated
and need to be merged. The plan is to place them under the drivers\serial directory to create a common code module,
so that both fvp-v8r and qemu can use the same code.
In the future, if new platforms use pl011 serial ports, they can also be directly reused
Signed-off-by: hujun5 <hujun5@xiaomi.com>
RESTORE_FACTORY used to reset the device
FACTORY_INQUIRY used to reset the device but need user confirmed.
Signed-off-by: minjian.tang <minjian.tang@aqara.com>
If the CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE is enabled and the
card is found to be ready in the waitenable call. Then
we do not need a Watchdog nor to configure the pin for
IRQ to detect ready.
This was reported as an error, and it is not, it simply means
we do not have to wait.
Summary:
Keeping this option out of depend on any common serial.
Using the option, need to implement xxx_lowputc.S/c.
You can also logging the booting message through rewriting
fake arm64_lowputc with other debug method (eg semihosting,
ARM debug channel etc).
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
1. arm64/makefile: preprocess link script to make configure more flexibly
2. arm64/EXTRA_LIBS: link all staging library
Signed-off-by: chao an <anchao@xiaomi.com>
move the IPPROTO_IP/IPPROTO_IPV6 flag into the socket_conn_s structure to
make it more than just control udp.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The following message is printed continuously and the nsh
shell is unusable on sama5d3-xplained.
"OHCI ERROR: Unhandled interrupts pending: 000001". This
happens when a keyboard is removed and reinserted on
port3 (lower port) while a bluetooth dongle is in port2.
warning: The int symbol SYSLOG_RPMSG_WORK_DELAY (defined at drivers/syslog/Kconfig:274) is being evaluated in a logical context somewhere. It will always evaluate to n.
make: *** [tools/Unix.mk:663: olddefconfig] Error 1
Signed-off-by: chao an <anchao@xiaomi.com>
The syntax check of kconfiglib is stricter than kconfig-frontends,
but the warnings of kconfiglib are not catched by Makefile. Since kconfiglib
is implemented by python, the return value of the shell is always zero($?),
In this PR, I redirected the relevant standard errors to the file to check
whether the kconfig warning is occurred
Signed-off-by: chao an <anchao@xiaomi.com>
The order of the registers was changed by the following commit:
---------------------------------
| armv7-a/r: modify regs index to improve exception performance
|
| Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
