Gregory Nutt
27bb133294
SAM3/4 and SAMV7 Serial: Serial interrupts left disabled.
...
A side-effect of changing serial settings via TERMIOS (such as tcsetattr) is that serial interrupts were being left disabled. This is not a problem if the serial configuration is changed when there are no open references to the serial device. In that case, serial interrupts are disabled and will not be enabled enabled until the serial device is first opened. But it is fatal if the serial device is already opened and if there is a task waiting to receive data. In that case, the side-effect of disabling interrupts is fatal: That task is then left hanging with interrupts disabled.
2015-04-08 14:14:01 -06:00
Gregory Nutt
ae15c6963c
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
69d2d77424
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
2015-04-01 12:37:44 -06:00
Gregory Nutt
e68baa3073
Include chip/sam_spi.h in sam_spi.h
2015-03-20 11:09:36 -06:00
Gregory Nutt
8d31651a1b
Bringing PPPD yet closer to the NuttX coding style
2015-03-11 18:47:04 -06:00
Gregory Nutt
d8a99fb73f
SAMV71-XULT: Enable 64-bit floating point support
2015-03-11 12:30:14 -06:00
Gregory Nutt
ed0fa0358c
SAMV7: Add PIO register definition header file
2015-03-08 17:34:26 -06:00
Gregory Nutt
bbf80bbd5d
SAMV71: Add pin mapping definitions
2015-03-08 13:24:32 -06:00
Gregory Nutt
5b72858f0c
SAMV71: Add UART register definition header file
2015-03-08 08:42:22 -06:00
Gregory Nutt
2571d6202d
SAMV71-XULT: Add heap allocation logic
2015-03-07 11:46:54 -06:00
Gregory Nutt
b1cecdd3ea
SAMV7: Add interrupt-related logic
2015-03-07 11:16:44 -06:00
Gregory Nutt
7f92f22167
SAMV71: Add Supply Controller register definition header file
2015-03-06 15:27:51 -06:00
Gregory Nutt
7113de4d18
SAMV71: Add PMC register definition header files
2015-03-06 14:58:13 -06:00
Gregory Nutt
9bcdf974a0
Add new common lazy FPU state saving option for ARMv7-M. Not yet verified
2015-03-06 08:26:43 -06:00
Gregory Nutt
3b798f6ef1
SAM3/4: Leverage some start-up logic from STM32
2015-03-05 17:45:13 -06:00
Gregory Nutt
f4ec5efe3a
SAMV71: Add memory map header file
2015-03-05 15:47:29 -06:00
Gregory Nutt
67c21e6817
SAMV7 Kconfig: Add peripheral selections
2015-03-05 13:51:39 -06:00
Gregory Nutt
5158e10bc2
Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments
2015-03-05 06:41:14 -06:00
Gregory Nutt
429863f348
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 17:19:38 -06:00
Gregory Nutt
59412f25ce
SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov.
2015-02-25 08:12:31 -06:00
Gregory Nutt
70c8ff6581
Eliminate some warnings
2015-02-25 08:05:35 -06:00
Gregory Nutt
ff6b34967b
Fix a compilation error. From Macs Neklyudov
2015-02-16 14:30:15 -06:00
Gregory Nutt
501bc15fbd
RTC: Remove all backdoor interfaces from rtc.h
2015-02-13 08:41:34 -06:00
Gregory Nutt
9e6cd16a8b
SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.
...
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
2015-02-10 11:10:55 -06:00
Gregory Nutt
8b0d9fb456
Fix some warning
2015-02-09 18:24:31 -06:00
Gregory Nutt
0a6ae631dc
Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers.
2015-02-09 17:16:55 -06:00
Gregory Nutt
d08e29e0a0
Remove and extra endif from the Kconfig
2015-02-03 12:46:40 -06:00
Gregory Nutt
5189cddef2
Convert the 64-bit usec limit to a 32-bit tick limit
2015-02-03 07:18:17 -06:00
Gregory Nutt
f017f4c8a8
SAM4CM: Add support for tickless operation
2015-02-03 07:00:54 -06:00
Gregory Nutt
30b141e2c8
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d
Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane
2015-01-24 06:03:39 -06:00
Gregory Nutt
9588b0e7a7
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
fe4e3f4529
Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt
2015-01-13 15:55:54 -06:00
Gregory Nutt
727a7c9e40
Fixes for more issues found by cppcheck
2014-11-24 17:00:26 -06:00
Gregory Nutt
7ab214d811
SAM EMAC: Fix typo in the check for successfull allocation of a timer
2014-11-18 14:20:31 -06:00
Gregory Nutt
2330c9c842
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
83e5ee1c04
SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S
2014-11-16 06:43:08 -06:00
Gregory Nutt
bf984b2b3a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
493ba46ec6
Fix typo is SAM4E pinmap file
2014-11-03 11:59:53 -06:00
Gregory Nutt
0eaa74962c
Costmetic changes -- spacing, comments.
2014-10-30 16:33:40 -06:00
Gregory Nutt
05c1d9707d
SAM3/4: Fix error serial TERMIOS ioctl handling
2014-10-30 12:23:15 -06:00
Gregory Nutt
11ab9c908e
Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required
2014-10-29 15:47:15 -06:00
Gregory Nutt
4098d8c4a2
SAM4: Fix a usbnsh build problem that has crept into all serial drivers
2014-10-28 15:44:47 -06:00
Gregory Nutt
103e5dc791
SAM4E: Fix error TC header file
2014-10-28 09:22:37 -06:00
