1.Allow multi users to access the same sensor device simultaneously.
2.Get real state of sensor device by cmd SNIOC_GET_STATE for users.
3.Get update state since last read by poll without timeout for users.
4.Sensor device will be activated when first user open and will close when
last user closed.
5.When multi users to access device, driver always set the minimum
sampling interval and latency to the sensor device and allow
downsampled for users above the minimum sampling interval.
6.The circbuffer will overwrite old data when buffer is full, so if users
don't read data soon, data will be lost, and the oldest data in circbuffer
are returned to the users.
7.Always read the last data in the circbuffer as initial value for new
users when the sensor device has not yet generated new data.
8.when user uses poll, if subscription interval is satisfied, the POLLIN
events is returned for each users.
9.When new user generate or the state of sensor device changed, the POLLPRI
will notify to all users.
10.Support multi advertisers to subscribe their own data as loop test.
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
1.cmd:SNIOC_REGISTER with struct sensor_reginfo_s to register user sensor
2.cmd:SNIOC_UNREGISTER to unregister user sensor
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
1.Simplify buffer opeations to avoid frequent resize for batch and no-batch mode.
2.When sensor event is first generated, the buffer is initialized.
3.Remove and merge batch_number to buffer_number when device support batch mode.
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- I noticed that the hello (ELF) application causes a memory leak.
- Finally, I found that the data section is not deallocated.
- This commit fixes this issue.
Impact:
- ELF loader with CONFIG_ARCH_ADDRENV=n
Testing:
- Tested with the following configs
- sprensense:elf, esp32-devkitc:elf, sabre-6quad:elf
- spresense:wifi_smp, rv-virt:nsh64, sabre-6quad:netnsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The putarea documentation originally suggested that provided buffer
contains just the rectangle to be updated.
The commit 664d45dcba changed the expected
behavior for lcd_framebuffer but failed to propagate this change to the
driver's documentation. Now the expected behavior is that the whole
frame is passed in buffer and it is driver's responsibility to pick the
correct pixels according to the provided rectangle coordinates.
This change requires update of the LCD drivers if they implement this
function.
Summary:
- I noticed that the hello (ELF) application causes a memory leak.
- Finally, I found that the data section is not deallocated.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp, rv-virt:nsh64, sabre-6quad:netnsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since IFF_DOWN is only used for request, not for status. Instead,
IFF_UP should be used to query the netdev status. The IFF_DOWN
related macros are also removed to avoid the confuse.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Make use of XCHG/BSWAP on x86, REV16 and REV on ARMv6-m and above,
and whatever other optimized instructions on other platforms.
Defines extra CONFIG variables, and removes the unused functions for
endian-swapping. Fixes some oversights in using the macros.
In order to support multiple LCD instances per board, add a pointer from
lcd_planeinfo_s to the lcd_dev_s which it belongs to. Also enhance the
putrun, getrun, putarea and getarea methods to pass through the
lcd_dev_s pointer to the respective device driver.
Port all LCD device drivers to this lcd_planeinfo_s extension.
Enhance SSD1306 driver to support multiple LCDs.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
the definition of MSG_NOERROR and IPC_NOWAIT should not be aligned
------------------------------------------------------------------
MSGOP(2)
NAME
msgrcv, msgsnd - System V message queue operations
...
EXAMPLE
The program below demonstrates the use of msgsnd() and msgrcv().
...
if (msgrcv(qid, (void *) &msg, sizeof(msg.mtext), msgtype,
MSG_NOERROR | IPC_NOWAIT) == -1) {
...
Signed-off-by: chao.an <anchao@xiaomi.com>
since devif_timer has been removed in:
commit 035d925864
Author: zhanghongyu <zhanghongyu@xiaomi.com>
Date: Sun May 29 21:47:28 2022 +0800
devif: remove all devif_timer
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
A device driver based on drivers/net/skeleton.c, which uses the W5500 in
MACRAW mode (i.e. bypassing the integrated protocol stack).
Signed-off-by: Michael Jung <michael.jung@secore.ly>
The driver is provided by Spresense SDK
ISX019 has the DOL-HDR feature, which combines images with different exposure so that
both bright and dark data of high-contrast subject can be viewed at the same time.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Change pin initialization timing for camera from board power on to camera device
power on for the following purposes.
- avoid unnecessary power consumption
- Make the corresponding pins available for other uses when camera is not in use
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
For CONFIG_BUILD_KERNEL using the sched/task/task_exithook implementation
will just not work. It calls user code with kernel privileges which is
a bit of a security issue.
The current SAMv7 PWM driver assumes that all PWM channels should
work in sync mode, but that is a partial case of a generic PWM
driver operation.
Start SAMv7 PWM channels in async mode. The sync mode should be
implemeted either using ioctl command or via a separate Kconfig
option.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
In file included from drivers_initialize.c:25:0:
/home/wangbowen/project/community/wbw_nuttx/nuttx/include/nuttx/crypto/crypto.h:74:20: error: expected ')' before 'void'
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Implement a generic access rights modification procedure instead
of the procedures that only do one thing (enable/disable write)
to one section (text).
Deleting a task from another task's context will not do, so shut
this gate down for BUILD_KERNEL. In this case if a task wants another
task to terminate, it must ask the other task to politely kill itself.
Note: kthreads still need this, also, the kernel can delete a task
without asking.
When the .elf file is loaded from disk, the kernel must be given write
access to the allocated .text section in the task's address environment.
The access is removed after the elf is loaded and relocations are done.
NOTE:
The reason this works for the ARM implementation, is that the ARM MMU
can be configured to give write access for the privileged mode, but
revoke write access for the user mode.
Regardless, it would be smart to revoke write access even for the
kernel, when the kernel does not need it. This framework allows doing
that, if someone wishes to take up the task.
Using the Kconfig macro does not work for RISC-V target, as there the
user heap follows .data/.bss and does not obey any Kconfig provided
boundary.
Added stubs for ARM and Z80 also.
Now that the environment strings are stored as an array of strings,
they can be passed from the application via char **environ, which
is really defined as a function call to get_environ_ptr().
This works as is for flat build, but protected mode and kernel mode
require a call gate, which is added here.
If address environments are in use, it is not possible to simply
memcpy from from one process to another. The current implementation
of env_dup does precisely this and thus, it fails at once when it is
attempted between two user processes.
The solution is to use the kernel's heap as an intermediate buffer.
This is a simple, effective and common way to do a fork().
Obviously this is not needed for kernel processes.
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The implementation of this feature is based on android systrace:
https://source.android.com/devices/tech/debug/ftrace
Application developers are more concerned about the performance of
the specified application section,
added two APIs to implement performance measurement:
void sched_note_begin(uintptr_t ip, FAR const char *buf);
void sched_note_end(uintptr_t ip, FAR const char *buf);
or
SCHED_NOTE_BEGIN(); /* defined to sched_note_begin(_THIS_IP_, __FUNCTION__) */
SCHED_NOTE_END(); /* defined to sched_note_end(_THIS_IP_, __FUNCTION__) */
Signed-off-by: chao.an <anchao@xiaomi.com>
to fix the following warning:
include/unistd.h:302:9: error: incompatible redeclaration of library function 'vfork' [-Werror,-Wincompatible-library-redeclaration]
pid_t vfork(void);
^
include/unistd.h:302:9: note: 'vfork' is a builtin with type 'int (void)'
and change 32768 to INT_MAX to match the type change
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- User mode allocator was used for setting up the environment. This
works in flat mode and probably in protected mode as well, as there
is always a a single user allocator present
- This does not work in kernel mode, where each user task has its own
heap allocator. Also, when the idle tasks environment is being set,
no allocator is ready and the system crashes at once.
Fix this by using the group allocators instead:
- Idle task is a kernel task, so its group is privileged
- Add group_realloc
- Use the group_malloc/realloc functions instead of kumm_malloc
For mult domains scene,,
activity and greety can be used at same time.
Let user to select domain governor.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
NuttX' string.h is using the FAR preprocessor definition, which is
defined in nuttx/compiler.h. Thus, it should include it.
Signed-off-by: Michael Jung <mijung@gmx.net>
since the temporary kernel spawn proxy need duplicate file handler
from caller, please reference the follow source code for more info:
sched/task/task_posixspawn.c
sched/task/task_spawn.c
This reverts commit 5c5f1dec08.
the private data should be done like this:
struct xxx_lowerhalf_s
{
struct djoy_lowerhalf_s lower;
/* Add more private data here */
};
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- In case of BUILD_KERNEL, NuttX uses USR mode sp and SVC mode sp.
- The kernel runs on SVC mode sp.
- While the kernel is running, up_getsp() cannot get the TLS address.
- The kernel requires tls_get_info() function.
- For the user land, up_getsp() can be used.
- tls_getinfo.c is always compiled and tls_get_info() function is
filtered by macros in the tls_getinfo.c.
Impact:
BUILD_KERNEL
Testing:
test program on custom Cortex-A9 board (BUILD_KERNEL)
ostest on sabre-6quad:smp (QEMU, BUILD_FLAT)
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
usage:
echo <pid/used/free> trace > /proc/memdump
echo used > /proc/memdump //output all used memory info with backtrace
echo free > /proc/memdump //output all free memory info
echo 22 > /proc/memdump //output used memory info for task pid is 22 with backtrace
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
In some scenarios, We need to update state information internally.
Instead of use idle-task to drive the checkstate and change state
function.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
Gregory Nutt has submitted the SGA
Giorgio Gross has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
State of problem:
- Some drivers that do not support write operations (does not
have write handler or ioctl do not perform any write actions)
are registered with write permissions
- Some drivers that do not support read operation (does not
have read handler or ioctl do not perform any read actions)
are registered with read permissions
- Some drivers are registered with execute permissions
Solution:
- Iterate code where register_driver() is used and change 'mode'
parameter to reflect the actual read/write operations executed
by a driver
- Remove execute permissions from 'mode' parameter
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
The angle observer always refer to a motor electrical angle,
while the speed observer can be applied to a motor electrical speed or a motor mechanical speed.
They can be used completely independently, so they should'n be coupled.
For example, a sensored motor controller in speed control mode doesn't need an angle estimator.
The packed-attribute on the tcb_info_s type was misplaced, which caused
incompatible memory layout between host and target. According to
current GCC documentation:
> You may specify type attributes in an enum, struct or union type
> declaration or definition by placing them immediately after the struct,
> union or enum keyword. You can also place them just past the closing
> curly brace of the definition, but this is less preferred because
> logically the type should be fully defined at the closing brace.
I also added jlink-nuttx.so to the .gitignore list and updated nxstyle
to ignore the camel case function names required by JLinkGDBServer.
Signed-off-by: Michael Jung <mijung@gmx.net>
Add a list in TCB to track all semphores the task held, so we
can release all holders when exit, so nxsched_verify_tcb
is unnecessary.
Signed-off-by: Zeng Zhaoxiu <walker.zeng@transtekcorp.com>
