Gregory Nutt
f4c2449c30
Rename arch/arm/src/sam34/chip to arch/arm/src/sam34/hardware.
2019-05-25 07:37:39 -06:00
Gregory Nutt
a76e137ce2
Squashed commit of the following:
...
sched/init/nx_start.c: Add support for CONFIG_BOARD_DRIVER_INITIALIZE. If this option is selected then nx_start() will call a board-provided function board_driver_initialize() immediately after calling up_initialize().
Rename CONFIG_BOARD_INITIALIZE to CONFIG_BOARD_LATE_INITIALIZE.
Raname board_initialize() to board_late_initialize()
2019-02-18 15:32:00 -06:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Gregory Nutt
301bf1ee77
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
...
Squashed commit of the following:
configs: Each board now initializes the touchscreen controller as a normal part of its board bring-up. board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
Remove all support for BOARDIOC_TSCTEST_SETUP
Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
e276d4d16d
Remove the BOARDIOC_TSCTEST_TEARNDOWN boardctl() command. Remove all implementations of board_tsc_teardown() (the were all stubs anyway except for the simulation).
2018-01-16 18:03:21 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Sebastien Lorquet
1bb76c43d3
atmel boards
2017-04-28 18:27:30 +02:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
0f46d714a9
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 15:10:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
f5f9d82d5a
arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing.
2017-03-02 08:43:33 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
a897fd4ccf
Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead.
2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54
Move apps/system/usbmonitor to nuttx/drivers/usbmonitor
2016-06-30 12:24:33 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
2ddd57c674
Centralize definitions associated with CONFIG_DEBUG_LEDS
2016-06-15 14:12:19 -06:00
Gregory Nutt
24c51ec1ff
Centralize definitions associated with CONFIG_DEBUG_LCD
2016-06-15 11:40:33 -06:00
Gregory Nutt
ba03134bed
Centralize definitions associated with CONFIG_DEBUG_SPI
2016-06-15 10:41:13 -06:00
Gregory Nutt
c494454bc4
configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 07:43:55 -06:00
Gregory Nutt
b0458e36da
configs/: Remove references to non-existent SPI_VERBOSE setting
2016-06-12 17:57:12 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
1746e8aad3
SAM4E-EK: Fix dangle right comment introduced in recent commit
2016-05-25 15:29:32 -06:00
Gregory Nutt
9ec104834a
Remove CONFIG_USARTn_ISUART
2016-05-25 11:21:48 -06:00
Gregory Nutt
4b3e710af6
Add an argument to board_app_initialize()
2016-05-24 10:51:22 -06:00
Gregory Nutt
0334d4b4cd
Rename usbmsc_archinitialize to board_usbmsc_initialize
2016-03-25 12:09:37 -06:00
Gregory Nutt
1699561bb6
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-13 12:37:46 -06:00
Gregory Nutt
9ed7d56a18
Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE
2016-02-04 12:14:17 -06:00
Gregory Nutt
36bb11d77c
Rename files containing board_app_initialize from xyz_nsh.c to xyz_appinit.c
2016-02-04 12:03:09 -06:00
Gregory Nutt
bfe51e3bc7
Move xyz_cxxinitialize.c from nuttx/configs/abc/src to apps/platform/abc/ (where xyz is the processor family and abc is the board)
2016-01-29 11:35:48 -06:00
Gregory Nutt
5a650d94a0
For Tiva/LM MCUs, rename up_spiinitialize to tiva_spibus_initialize
2016-01-26 15:20:24 -06:00
Gregory Nutt
e792b09830
For SAM MCUs, rename up_spiinitialize to sam_spibus_initialize
2016-01-26 13:03:12 -06:00
Gregory Nutt
893bd9c7b5
Rename board_led_off to board_autoled_off
2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb
Rename board_led_on to board_autoled_on
2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:03:01 -06:00
Gregory Nutt
fc58f7e538
Remove dangling whitespace
2015-10-04 15:28:03 -06:00
Gregory Nutt
e6e46f830b
Standardize the width of all comment boxes in C files
2015-10-02 17:43:08 -06:00
Paul A. Patience
55d8aee826
Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience"
2015-09-04 16:42:34 -06:00
Gregory Nutt
0dbf579aa8
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
Gregory Nutt
68a97a53ac
Make some file section headers more consistent with standard
2015-04-08 09:15:17 -06:00
Gregory Nutt
f73fdd90c9
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
2015-04-04 11:49:15 -06:00
Gregory Nutt
fdfe38ea0d
rch_tcinitialize() and arch_tcunitinitialize() renamed to board_tsc_setup() and board_tsc_teardown(). These are not long called directly by applications but only indirectly throught the crappy boardctl() OS interface.
2015-03-31 13:21:25 -06:00
