Gregory Nutt
663f5dfbdd
Update readme. Fix stray newline in shenzhou Make.defs
2017-08-08 18:21:08 -06:00
Gregory Nutt
53d8a0b557
Trivial update to a README file
2017-08-08 13:03:09 -06:00
Gregory Nutt
f3f522514e
libm: Eliminate a warning from lgamma(); Update some comments; Add some logic to handle broadcast better -- Currently conditioned out because it does not work.
2017-08-08 12:08:43 -06:00
Gregory Nutt
09f31d1371
Spirit Radio: Add support for CSMA backoff count reached interrupt.
2017-08-08 10:34:51 -06:00
Gregory Nutt
79400ea960
B-L475-IOT01A: Enable UDP broadcast test in the spirit-starhub configuration.
2017-08-08 08:32:41 -06:00
Jeff
4cbde22992
I'm working on bringing up USB full-speed support on STM32F405. My board does not include a USB power switch, VBus sensing, over current detection, or ID pin.
...
This commit add a config STM32_OTGFS_VBUS_ CONTROL which lets us selectively disable VBus sensing and control. I also sneaked in a change to disable the configgpio call for the ID pin, which is only used in OTG mode which isn't supported yet. The only pins that need to be initialized should be OTGFS_DP and OTGFS_DM.
These changes let a USB mouse enumerate on my platform if it's plugged in on power-up. Plugging, unplugging, clicking, or moving the mouse cause NSH to stop responding. Because I'm using the ramlog, I don't have useful debug messaging yet, so there's a lot more work I have to do to troubleshoot it or get my JTAG debugging set up, but these patches shouldn't hurt anything. I'm hoping my issue is something simple I overlooked in configuration.
I'm planning to add similar changes for the OTGHS peripheral (using integrated full speed phy) but I still need to test those changes before submitting patches.
2017-08-07 10:24:31 -06:00
Gregory Nutt
1ac4848686
Spirit bugfixes: Was hanging occasionally because there was not mechanism to restart the poll timer if poll was not performed because Spirit ws busy. Fixed by not checking if Spirit is busy. The TX poll can be performed asynchronouly while spirit is busy; any outgoing data will queued until Spirit is ready. Fixed handling of a timeout condition. Failure to transmition to the TX state would fail (timeout) if in a race condition Spirit already committed to the RX state. The driver needs to recover the state properly and avoid debug assertions in this event.
2017-08-07 09:22:16 -06:00
Gregory Nutt
e57a5755cc
TX timeout must also be cancelled on a TX error. TX timeout should check if we are waiting for a TXto complete. TX timeout was too short (short than the maximum number of retries).
2017-08-06 16:56:02 -06:00
Gregory Nutt
48a507c0b7
6LoWPAN: When obtaining the radio MAC address from the IP address, handle the special case of broadcast and multicast address.
2017-08-06 13:50:48 -06:00
Gregory Nutt
91cfe6c9be
Spirit radio: Dropping packet size to 94 seems to fix problem with CRC failures.
2017-08-06 12:02:55 -06:00
Gregory Nutt
9a53a2f64a
Spirit: Restore the 96 byte maximum packet length. Reducing the packet length had no effect on eliminating RX FIFO errors.
2017-08-06 10:31:50 -06:00
Gregory Nutt
84001f79a0
Spirit Network Driver: Add support for watermark interrupts on RX FIFO. Reduce max packet length to avoid an errata.
2017-08-06 10:10:55 -06:00
Gregory Nutt
3b1e2ac4fd
Spirit network driver: Restructure threading to reduce locking. Still get a few RX FIFO errors.
2017-08-06 08:26:51 -06:00
Gregory Nutt
4c1a8170de
Update README.
2017-08-05 12:48:07 -06:00
Gregory Nutt
a29a168086
Spirit + 6LoWPAN: In STAR configuration, Spirit must use a configured well known hub address. 6LoWPAN cannot assume that the PAN coordinator is the STAR hub; it must ask the radio to provide it with the address of the star hub
2017-08-05 09:13:29 -06:00
Gregory Nutt
c2fbef2062
b-l475e-iot01a: Add configurations to support a star topology.
2017-08-05 07:53:55 -06:00
Gregory Nutt
5d96385c52
Spirit: Increase number of retries if there is no acknowledgement; Add interrupt handling for the case where the max number of retries expires. Fix some badly implemented queue management code. With these changes the basic UDP and TCP tests work.
2017-08-04 15:20:10 -06:00
Gregory Nutt
8027d1bf18
Spirit: Enable AutoACK, TX retries, and RX timeouts in the network driver.
2017-08-04 13:16:07 -06:00
Gregory Nutt
44c59f7533
Update a README
2017-08-04 12:19:59 -06:00
Gregory Nutt
733d96cf81
Spirit: Correct setting of the length width field; Add multicast and broadcast addresses to radio properities.
2017-08-04 12:19:59 -06:00
Gregory Nutt
8a785c4b66
Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases.
2017-08-03 08:37:05 -06:00
Gregory Nutt
fecc12df38
Update a README
2017-08-02 14:34:24 -06:00
Gregory Nutt
a6fa3b311d
b-l475e-iot91a: Add apps/examples/nettest and eamples/udp to Spirit1 configuration. Add telnet support. fix driver statistics configuration.
2017-08-02 07:01:42 -06:00
Gregory Nutt
1275c3e249
Spirit: Network driver needs to setup IP address based on configured node address. If no node address is provided, then it will use a default. Also upate a README.
2017-08-01 16:33:34 -06:00
Gregory Nutt
cfea8adacb
L should be capitalized in 6LoWPAN
2017-06-18 16:00:08 -06:00
Gregory Nutt
8ae5450268
pthreads: Move pthread_yield from sched/pthreads to libc/pthreads. it is a simple wrapper for sched_yield and does not belong within the OS.
2017-06-14 07:31:10 -06:00
Gregory Nutt
40f60d6da5
Update to coding standard document and to a README file.
2017-06-11 10:01:14 -06:00
Alan Carvalho de Assis
b7ca90a721
stm32f103-minimum: Use separated read_ops for GPIO interrupt pins
2017-06-11 07:20:18 -06:00
Gregory Nutt
6e0ec04084
Update README
2017-06-10 17:54:16 -06:00
Gregory Nutt
2b8abbb3c6
configs: Add readme for B-L465E-IOT01A Development kit. This port is currently under consideration (but may not actually happen)
2017-06-10 08:58:47 -06:00
