Gregory Nutt
43936a6a69
Remove an UNSED that is no longer necessary
2015-03-14 18:41:26 -06:00
Gregory Nutt
e3bffdf92d
Fix a ommission in the last changes to the unbind() method prototype
2015-03-14 18:14:54 -06:00
Gregory Nutt
b886cf9f65
Update TODO list
2015-03-14 17:58:41 -06:00
Gregory Nutt
2258189a11
Update ChangeLog
2015-03-14 17:39:29 -06:00
Gregory Nutt
2be14d09a2
Fix a bug in the FAT unbind() logic. There were problems with the way certain internal list handling was implemented. The end result is that newly opened or cloned file structures were never being added to the list of open files. So when the unmount() happens, it always looked like there were not open files and a crash could ensue.
2015-03-14 17:33:48 -06:00
Gregory Nutt
8055ba4d03
Pass the umount2() flags to every unbind() implementation. That is where the the decision to umount or not will be made.
2015-03-14 17:22:02 -06:00
Gregory Nutt
f932b26db1
Add umount2(). umount() is now a macro that just calls umount2() with flags = 0.
2015-03-14 16:48:45 -06:00
Gregory Nutt
9e2587ffe9
SAMV7 XDMA: Fix a problem with invalidating the cache on RX DMA
2015-03-14 15:25:32 -06:00
Gregory Nutt
f8aa0ec741
Update ChangeLog
2015-03-14 14:48:59 -06:00
Gregory Nutt
dd342bb4a7
EFM32: Add I2C driver. From Pierre-noel Bouteville
2015-03-14 14:47:53 -06:00
Gregory Nutt
85b9a7f1a5
SAMV7: Costmetic changes to SDRAM logic
2015-03-14 13:58:34 -06:00
Gregory Nutt
3b0615ece8
SAMV7: More SDRAM logic. It does still does not work
2015-03-14 13:27:00 -06:00
Gregory Nutt
cc497202ed
SAMV71-XULT: Add support for SDRAM (unverified)
2015-03-14 11:00:46 -06:00
Gregory Nutt
d5377842ea
SAMV7-XULT: Build support for SDRAM (SDRAM init still missing)
2015-03-14 09:16:27 -06:00
Gregory Nutt
cbdaa0dc77
Include correct chip file
2015-03-14 09:15:11 -06:00
Gregory Nutt
4ebeeecb7b
Fix some typos in comments and conditioned out code
2015-03-14 09:14:51 -06:00
Gregory Nutt
867bd20f5c
SAMV7: Add SDRAMC register definition header file
2015-03-14 09:13:51 -06:00
Gregory Nutt
fbf36e2b1e
Update README
2015-03-14 07:50:03 -06:00
Gregory Nutt
9c5205142f
SAMV7 HSMCI: Change system bus interfaces seems to eliminate DMA failures.
2015-03-13 14:35:36 -06:00
Gregory Nutt
0b64c51a13
Minor updates from initial debugging.
2015-03-13 13:46:27 -06:00
Gregory Nutt
db786ea654
SAMV7 HSMCI: Reading response registers at the wrong time can cause loss of response data.
2015-03-13 12:46:33 -06:00
Gregory Nutt
b83cea4f99
Back out 70cb75adaf3243478276cebf367c5f47c4725715
2015-03-13 10:40:09 -06:00
Gregory Nutt
ad216583b7
SAMV7: Fix some cloning errors. SAMA5->SAM7
2015-03-13 10:38:10 -06:00
Gregory Nutt
74548a5ed4
Fix a typo in a Cortex-M7 address
2015-03-13 10:37:21 -06:00
Gregory Nutt
361d4a3fac
SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK
2015-03-13 09:27:16 -06:00
Gregory Nutt
a45d7ca909
Update ChangeLog
2015-03-13 07:31:26 -06:00
Gregory Nutt
c5953bd0e9
Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf
...
and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf ) shows that ACMD23
must be preceeded with CMD55 command as any other ACMD commands.
Also, after the block reading wait loop must be inserted before writing the next block of data to
the sd card
From Dmitry Nikolaev via Jussi Kivilinna
2015-03-13 07:26:16 -06:00
Gregory Nutt
3473bb1635
drivers/serial: Report correct number of bytes free in serial buffer with FIONWRITE. From Jussi Kivilinna.
2015-03-13 07:22:43 -06:00
Gregory Nutt
0a939ff218
Pipes: Fix zero-lenth writes. From Jussi Kivilinna
2015-03-13 07:21:06 -06:00
Gregory Nutt
ce0021e753
STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna
2015-03-13 07:18:21 -06:00
Gregory Nutt
6cb5b48300
STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.
2015-03-13 07:06:46 -06:00
Gregory Nutt
639a2c7fd2
Update to PIC32MZ README from David Sidrane
2015-03-13 06:57:58 -06:00
Gregory Nutt
4580af6d0b
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
2015-03-12 18:03:41 -06:00
Gregory Nutt
743fd5ac50
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
2015-03-12 16:00:38 -06:00
Gregory Nutt
b4b59f928f
Minor update to README
2015-03-12 13:43:54 -06:00
Gregory Nutt
da3233a527
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
2015-03-12 12:27:06 -06:00
Gregory Nutt
109b9910f6
SAMV7: Add TWI/I2C driver (untested)
2015-03-12 10:58:11 -06:00
Gregory Nutt
00a841c417
SAMV7: Add SPI header files and driver
2015-03-12 09:12:37 -06:00
Gregory Nutt
a614fd8d6e
Update ChangeLog
2015-03-12 08:14:26 -06:00
Gregory Nutt
3ba9dda227
socket: net_dupsd: Do not call sockfd_socket() twice. From Juha Niskanen
2015-03-12 08:11:08 -06:00
Gregory Nutt
0b8248b33c
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
2015-03-12 08:08:50 -06:00
Gregory Nutt
9997fa77ad
ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen
2015-03-12 08:00:53 -06:00
Gregory Nutt
dba41a7048
chdev_driver: Avoid NULL pointer dereference when bch->refs == 255. From Juha Niskanen
2015-03-12 07:58:36 -06:00
Gregory Nutt
26b9b5a252
usbdev: usbmsc_scsi: Add NULL pointer check. From Juha Niskanen
2015-03-12 07:55:53 -06:00
Gregory Nutt
99f4e31b69
stm32_i2c: Add missing NULL check. From Juha Niskanen
2015-03-12 07:53:41 -06:00
Gregory Nutt
c39725b398
libc: stdio: Fix NULL pointer dereference in ungetc(). If 'stream' was NULL, 'stream->fs_oflags' was evaluated. From Juha Niskanen
2015-03-12 07:51:23 -06:00
Gregory Nutt
af6d9e2684
sched: Do not use uninitialized boolean in waitpid(). From Juha Niskanen
2015-03-12 07:45:10 -06:00
Gregory Nutt
6792cb3e34
procfs: fs_procfsproc: Fix potential NULL pointer dereference of 'node'. From Juha Niskanen
2015-03-12 07:42:39 -06:00
Gregory Nutt
70e7dcba71
Bringing PPPD yet closer to the NuttX coding style
2015-03-11 18:47:04 -06:00
Gregory Nutt
90bc4b81ee
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
2015-03-11 14:41:58 -06:00
