Current samv7 platform does not define SoC memories sizes. This define
both internal flash and sram memories sizes and update all defconfig
files.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When it was in slow speed mode (by default), the output SDMMC_CK clock rise and
fall times were about 13 ns each, that were very slow and
prevented some SDIO devices from working.
This commit enables the MCAN driver to function with both rev A and rev B
version of the chip. The version of the chip is selected automtically from
SAM_CHIPID_CIDR register so there is no need to predefined it in the
configuration.
The functonality was tested on rev B version of the chip. The rev A was
not tested since I do not have the functional board but the code remains
the same as in the previous NuttX version so it should not cause any
additional troubles.
The code is co-authored by Miloš Pokorný who wrote the initial transition
to rev B of the chip.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Co-authored-by: Miloš Pokorný <milos.pokorny@seznam.cz>
Summary:
- This commit replaces the critical section with spinlock
- The logic is the same as cxd56_serial.c
Impact:
- None
Testing:
- Tested with lc823450-xgevk:bt
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2.fix some files to fix compile warning
3.remove blueteeth header files, which are not used in nuttx core.
4.fix configs and add lost files
5.update defconfig, remove useless items
6.fix compile warning for nuttx phyplus
7.delete useless: ble, h4, zblue defconfig files form phyplus configure folder
8.fix file format check error on phyplus source code
9.fix phyplus kconfig param error
10.update configure file for nuttx
This commit adds DMA and TC support to SAMV7 AFEC driver. The AFEC (ADC)
can now be triggered by Timer/counter at chosen frewuency and samples can
be transfered via DMA with configurable number of samples. Timer/counter
trigger is now set as a default option with the possibility to change it
to software generated trigger.
DMA is inspired by SAMA5 driver and also uses ping pong buffers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Just a minor change fixing some compile warnings and errros, does not have
any impact on functionality.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
The FAT was not coherent. Resulting in a write failed
with errno:28 No space left on device.
It is unclear how the memory is acesses prior to the DMA
completion. But this restructuring ensures the data
is coherent.
This issue was not detected on the stm32h7
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
Uros Platise has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
When enable DEBUG_TCBINFO config, a global struct will
provide, then debuggers can aware nuttx task infomation.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
This commit adds microcontroller support for Analog Front End driver to
samv7 MCUs. Only software trigger via IOCTL is currently supported,
averaging can be set by configuration option CONFIG_SAMV7_AFECn_RES.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Strongly-Ordered requires aligned access unless
caching is enabled.
Normal memory
Accesses to normal memory region are idempotent...
- unaligned accesses can be supported
With CONFIG_ARMV7M_DCACHE the cache maintenance operation
are not present. Or if CONFIG_ARMV7M_DCACHE_WRITETHROUGH
is on then buffering operations are no-ops.
This change enables MPU_RASR_C and MPU_RASR_B if
CONFIG_ARMV7M_DCACHE is only set.
if CONFIG_ARMV7M_DCACHE_WRITETHROUGH is set then only
MPU_RASR_C is enabled.
N.B When caching is disalbed unaligned access may cause hard faults
so add -mno-unaligned-access
It is always safe to enable Buffering in FLASH to achive unaligned
access leniency, as it is not written to.
the SDIO clock is not enabled when the bus goes to the idle state, that, in turn, breaks
IRQ delivering mechanism over DAT[1]/IRQ SDIO line to the host.
This reverts commit d9a5b92c1a306a70df52d50a02a80dc8ef20bf0d.
Revert "arch/arm: Remove -march and -mtune"
This reverts commit b8e99cf12f3a287311a2d341f285c71a5da3e4d4.
This commit adds new files that support functionality of QSPI driver in
SPI Master Mode. This functionality is included in new files sam_qspi_spi.x
to avoid too much mess in the source code. QSPI in SPI mode can be turn
on by config option SAMV7_QSPI_SPI_MODE.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
When NuttX is booted from a foreign (non NuttX)
bootloader. There as a possibility that the
bootloader configured the MPU, in an
incompatible way for the NuttX memory usage.
The option to reset the MPU before it is initialized
may not succeed if the bss and data initialization
code violated the previous MPU configurations.
Added herein are ARM_MPU_RESET and
ARM_MPU_EARLY_RESET. The former can be used
If the system is capable of booting and running
NuttX MPU configuration code without an MPU
violation. The latter is used if the system can
not run the bss and data initialization code.
These are options so that a NuttX may be configured to
not clobber a bootloader MPU configuration in a system
that is architected to share the MPU configuration task.
This commit adds header file imxrt_adc_etc.h for external ADC trigger
module. This contains only definitions of ADC_ETC registers and separate
bits, implementation of ADC_ETC driver is yet to be done.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
If we repeatedly call up_cpu_pause and up_cpu_resume, there would be
cases where the next call to up_cpu_pause happens while the other CPU is
still responding to the previous resume request. In this case the
DEBUGASSERT will trigger. We should allow the first CPU to wait until the
other CPU has finished responding to the resume request.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The stm32_gpiosetevent calls stm32_configgpio. So
the pin is infact restored to the SDMMC/SDIO D0.
The seconday init, dropped interrupts in a debug
build with HW stack checking on after the GPIO glich
fixes and that was how it was detected.
This prevents gliches on changing to an output mode.
If not the ALT mux can be selecting a IP block that
is drving the line to say 0. Then the output is connected
to that source, then swithced to the correct source.
This prevents gliches on changing to an output mode.
If not the ALT mux can be selecting a IP block that
is drving the line to say 0. Then the output is connected
to that source, then swithced to the correct source.
This prevents gliches on changing to an output mode.
If not the ALT mux can be selecting a IP block that
is drving the line to say 0. Then the output is connected
to that source, then swithced to the correct source. This
produced a 430 nS glich on a F4 @168 Mhz. It was a enough
to corrupt an I2C device with a bus monitor.
Summary:
- This commit replaces the critical section with spinlock in cxd56_serial.c
Impact:
- None
Testing:
- Tested with spresense:rndis_smp, spresense:rndis
and spresense:rndis_wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Gregory Nutt has submitted the SGA
Bill Gatliff has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
Correct typos in include/nuttx/arch.h and suppress
"'noreturn' function does return" warning coming from arm_pthread_exit.c
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is currently only used on STM32L4+ devices. Page erase in
flash_erase() function supports only dual-bank mode so it makes little
sense to configure this for unsupported single-bank mode.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
CAN_ESR2 register was having problems of havng the correct values when
the bus was busy (with 3 and more nods). The register bit fields were
incorrectly indicating that there is no free MB and would not updated
itself from this state which was causing the applications to freeze on
write. This change relies only on a software control which should avoid
the problems described above.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This feature depends on frame pointer, "-fno-omit-frame-pointer" is mandatory
This feature can not be used in THUMB2 mode if you are using GCC toolchain,
More details please refer:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92172
Signed-off-by: chao.an <anchao@xiaomi.com>
Ken Pettit is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Previous implementation has always expanded the width of the timer to 32-bit.
This feature is not always needed and should be configurable from Kconfig.
This commit changes the FLexPWM driver for iMXRT MCU so that LDOK bits in
Master Control Register are set at once after all channels are configured.
Setting LDOK bit enables the driver to load prescaler, modulus and PWM
values of corresponging submodule and start PWM output. Setting all bits
at once instead of doing it separately can help avoiding the channels to
be out of sync with each other.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Number of configured ADC channels is currently only defined in board
level section, typically in xxx_adc.c file. This commit introduces
ioctl command ANIOC_GET_NCHANNELS that returns the number of configured
channels which is determined by the driver code. The change can allow the
applications to be more flexible when it comes to multiple ADC devices
with different number of configured channels.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
PWM drivers currently use channel number 0 for the channels that are not
used by the application. This commit adds number -1 which indicates that
all following channels are not configured and that the loop can be broken.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
arch/arm/src/stm32/Kconfig:
* In configs STM32_ADC_MAX_SAMPLES, STM32_FOC_HAS_PWM_COMPLEMENTARY:
Fix typos in help text.
arch/arm/src/stm32h7/Kconfig:
* In configs STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY,
STM32H7_FLASH_CR_PSIZE, STM32H7_RTC_LSECLOCK_START_DRV_CAPABILITY,
and STM32H7_RTC_LSECLOCK_RUN_DRV_CAPABILITY: Fix typos in help text.
arch/arm/src/stm32l5/Kconfig:
* In configs STM32L5_FLOWCONTROL_BROKEN, STM32L5_SDMMC1_DMAPRIO: Fix
typos in help text.
arch/arm/src/stm32/hardware/stm32_exti.h:
* Change STM32_EXTI2_OFFSET (offset to EXTI2 registers) from 0x18
to 0x20. This symbol is defined when CONFIG_STM32_STM32F30XX or
CONFIG_STM32_STM32F33XX. According to the current reference
manuals for STM32F334xx (RM0364 rev 4) and STM32F302xx (RM0365
rev 8), EXTI_IMR1 is at offset 0x00 and EXTI_IMR2 is at offset
0x20, i.e., 0x20 apart. The same offset applies to the rest of
the registers: EMR1/EMR2, RTSR1/RTSR2, etc.
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
It seems to be caused by the corrupted or wrong CPSR restored on return
from exception. NuttX restores the context using code like this:
msr spsr, r1
GCC translates this to:
msr spsr_fc, r1
As a result, not all SPSR fields are updated on exception return. This
should be:
msr spsr_fsxc, r1
This bug has been fixed by Heesub Shin in:
343243c7c0
Change-Id: Ibc64db7bceecd0fb6ef39284fb5bc467f5603e2e
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
It is no longer necessary to define CONFIG_ARCH_MATH_H when we would
like to link libm.a other than nuttx math library. So, this commit
removes the error condition.
Summary:
- This commit introduces setintstack macro to rp2040
which is used for SMP with interrupt stack
Impact:
- SMP with interrupt stack
Testing:
- Tested with raspberrypi-pico:smp
- NOTE: seed to set CONFIG_ARCH_INTERRUPTSTACK=2048
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit introduces setintstack macro which can be
overridden for SMP with interrupt stack
Impact:
- SMP only
Testing:
- Tested with raspberrypi-pico:smp
- NOTE: more commits will be added later
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
For the case when the watchdog is triggering a timeout we did not
correctly reset the GPIO_SDIO_D0.
Without this fix, the SD card can become inaccessible.
It turns out there is no difference in these two files as well as the
reference manual for the registers between the two parts, so it probably
makes sense to unify them
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
corrected setting SDMMC_DCTRL.DTMODE field for block data transfers ending on block count
and for block data transfers ending with STOP_TRANSMISSION command;
stm32_sdio: added more debug messages
instead calling kmm_heapmember or umm_heapmember because:
1.The stack supplied by caller may allocate from heap too
2.It's hard to implement these two function in ASan case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I196377822b7c4643ab4f29b7c1dc41dcd7c4dab1
* port didn't know about data-register fifo
* port didn't handle overrun condition
* driver could get stuck if interrupts were skipped due to saturation
