Eero Nurkkala
c7cf9fd9d2
mpfs: board Make.defs: add bootloader linker option
...
Use the linker script used with bootloaders that start
from the eNVM.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-10-21 22:40:26 -05:00
Eero Nurkkala
ad76b6733c
mpfs: boards: add ld-envm.script
...
This configuration is used when flashing nuttx as a bootloader
in the eNVM region.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-10-21 22:40:26 -05:00
Eero Nurkkala
3b330089d5
mpfs: ddr: add DDR training
...
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.
DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:
envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256
l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k
256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git
For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:
cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
cat nuttx.bin >> nuttx_bootloader.bin
riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
*+0x20220000 nuttx_bootloader.bin flashable_image.hex
This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-10-21 22:40:26 -05:00
Abdelatif Guettouche
9235d6605b
boards/esp32&esp32c3: Remove crypto accelerators' defconfigs.
...
Since the tests were removed from the drivers, there is no need for
these defconfigs anymore.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
55e8b17974
boards/risc-v/esp32c3: Remove the flash encryption test.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
e424241d09
arch/risc-v/esp32c3: Remove the bignum test from the driver.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
91cb9dafaf
arch/risc-v/esp32c3: Remove the RSA test from the driver.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
652d77efd2
arch/risc-v/esp32c3: Remove the SHA test from the driver.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
5d1c01aea7
arch/risc-v/esp32c3: Remove the AES test from the driver.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-19 18:41:57 -03:00
Matheus Castello
5c15fe6ec1
boards: k210: Add initial gpio user space support
...
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
2021-10-17 17:29:59 +09:00
Matheus Castello
1bc3ab513d
boards: risc-v: k210: Fix -march and -mabi
...
-march=rv64gc -mabi=lp64 does not resolve lib paths for
riscv64-unknown-elf-gcc resulting in lib not found errors.
Changing it to -march=rv64imafc -mabi=lp64f that is the default
used in Sipeed repositories.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
2021-10-14 15:50:20 +09:00
jsun
c58fddb915
Open ble controller adaptation code
...
N/A
Signed-off-by: jsun <jsun@bouffalolab.com>
2021-10-08 02:30:27 -07:00
Gustavo Henrique Nihei
0a1b3c1331
risc-v/esp32c3-devkit: Add BLE defconfig
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2021-10-05 08:45:40 -03:00
Gustavo Henrique Nihei
47e804b167
risc-v/esp32c3: Make BLE adapter code compliant to nxstyle
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2021-10-05 08:45:40 -03:00
Abdelatif Guettouche
ee20d0f545
esp32c3_rom.ld: Add a strong declaration to some libgcc function that
...
are ROM resident.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-10-01 10:09:04 -03:00
Gustavo Henrique Nihei
548f2b6eab
boards/esp32c3-devkit: Add mcuboot_confirm defconfig
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
3c63cb522c
risc-v/esp32c3: Enable booting from MCUboot bootloader
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2021-09-27 18:22:29 -07:00
Alan C. Assis
f9b322567c
boards/esp32c3: Remove "return ret" from bringup
2021-09-21 10:34:55 -03:00
Alan C. Assis
63a17f5cdd
esp32c3-devkit: Add board profile to use LVGL on GC9A01 display
2021-09-18 20:58:30 -05:00
Janne Rosberg
e022ea1283
mpfs/icicle/configs/hwtest: enable SD card
2021-09-18 12:18:09 -03:00
Eero Nurkkala
812f504c16
mpfs: emmcsd: add Kconfig/Makefile and board files
...
Add necessary Kconfig, Make.defs, Makefile and board
file changes.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-09-18 12:18:09 -03:00
Peter Bee
a7a3d8bec7
boards/esp32c3: add ESP32C3 LCD drivers
...
Add board driver for ST7735, ST7789 and GC9A01
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2021-09-17 09:35:10 -03:00
Alan C. Assis
099e9fb4f7
boards: Remove -nostartfiles -nodefaultlibs from LDFLAGS
2021-09-13 08:58:25 +08:00
Janne Rosberg
d361a9ded8
boards/icicle: add hwtest config
...
This config enables all peripherals and some tools.
Also useful for CI build check.
2021-09-11 23:33:01 +08:00
Sara Souza
acf18bd82d
risc-v/esp32-c3: refactor the Wi-Fi board logic.
...
This commit moves the Wi-Fi initialization to
Wi-Fi specific file and to spiflash initialization.
It also reserves one partition for Wi-Fi use and for general use,
and makes it possible to me mounted by several FS.
2021-09-09 20:14:04 +08:00
Sara Souza
11068fad1b
risc-v/esp32-c3: Enable the allocation of multiple MTD SPI Flash partitions
2021-09-09 20:14:04 +08:00
Gustavo Henrique Nihei
310a2dd0e4
tools/esp32c3: Create option for merging all binaries into a single file
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2021-09-08 12:16:52 +02:00
Alin Jerpelea
9d870e1502
defconfig: allow use of BSD components
...
several configs are used for testing and need the BSD components
more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-02 09:00:43 -03:00
Alin Jerpelea
2ab9e7fef0
Revert "esp32: remove FS_SPIFFS from defconfigs"
...
This reverts commit 35a004bdd0
.
2021-09-02 09:00:43 -03:00
Alin Jerpelea
35a004bdd0
esp32: remove FS_SPIFFS from defconfigs
...
FS_SPIFFS uses BSD license and should not be enabled by default
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-30 22:39:04 +08:00
Xiang Xiao
e3ab1179fa
board: Enable CONFIG_LIBCXXABI when CONFIG_LIBCXX is enabled
...
to avoid link libsupc++.a which is provided by toolchain
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-28 17:13:43 -03:00
Alin Jerpelea
a43650648e
risc-V: remove ble defconfigs
...
By default the components with BSD license should be disabled
NOTE:
the BLUETOOTH components was enabled in a non bluetooth config
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-27 02:56:22 +08:00
Antti Vähälummukka
6eb73ced51
arch/risc-v/src/mpfs: Add CorePWM driver
...
Add a driver for CorePWM block, which can be instantiated on PolarFire SOC FPGA
This supports 2 CorePWM blocks on the FPGA. One CorePWM block provides 8 PWM output signals
2021-08-20 08:56:30 -03:00
Xiang Xiao
b12f588140
Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL
...
since boardctl isn't a libc feature
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-06 13:58:26 +02:00
Xiang Xiao
5025fbef8d
Rename LIB_ to LIBC_ for all libc Kconfig
...
follow other libc component naming convention
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-05 19:45:24 +02:00
Xiang Xiao
007adc7736
Replace all __attribute__((section(x)) with locate_data(x)
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-29 21:55:21 -03:00
jordi
b87333bae8
Kconfig: remove empty help sections
...
To avoid the setconfig warning: "has 'help' but empty help text"
2021-07-23 02:32:19 -07:00
Alan C. Assis
b9ec0063bc
Remove duplicated Documentation of the bl602evb
2021-07-19 06:26:52 -07:00
Sara Souza
81e881c8c0
risc-v/esp32-c3: Makes output readable and rmv unnecessary var.
2021-07-16 19:53:04 -03:00
Virus.V
063e1d6b74
risc-v/bl602: update wifi firmware and some fixup.
...
1. Added check for repeated connection wifi operations.
2. Invoke the carrier on/off operation in the wrong place.
3. The RTC initialization time is incorrect.
4. Reserve 32K I-Cache space in the linker script.
5. Increase the size of the wifi firmware receiving buffer.
Signed-off-by: Virus.V <virusv@live.com>
2021-07-13 05:12:12 -07:00
Virus.V
4e950c3e30
risc-v/bl602: add boardctl support
...
Signed-off-by: Virus.V <virusv@live.com>
Change-Id: I74280f5cb801e923fb987009ae007aa02677b14d
2021-07-13 02:50:40 -07:00
Dong Heng
f5eaf82c93
risc-v/esp32c3: Use onexit to free thread private semaphore
2021-07-12 09:38:21 -03:00
Jiuzhu Dong
85470176e7
sched/task: delete CONFIG_MAX_TASKS limit
...
Change-Id: I583015a95dbcebd352f81ecb3104ffdbd646a9ec
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-07-11 19:42:30 -07:00
Dong Heng
d83caef2df
boards/esp32c3-devkit: Support mounting SPI Flash MTD to littleFS
2021-07-08 09:01:43 -03:00
Dong Heng
2d6c1044fb
boards/esp32c3-devkit: Fix compiling error
...
Add UID defconfig to check compiling error.
2021-07-07 02:49:52 -05:00
Xiang Xiao
f0961f43a6
boards/esp32c3-devkit: Add etctmp to .gitignore
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-06 09:49:43 -05:00
chenwen
97b8e90d79
boards/esp32c3: Add romfs configuration
2021-07-06 05:25:14 -05:00
Dong Heng
475becac37
risc-v/esp32c3: Add board_ioctl and board_uniqueid
2021-07-05 23:12:17 -05:00
Nathan Hartman
ce20211357
Fix various typos in comments and documentation
...
Fix typos in these files:
* Documentation/components/drivers/character/foc.rst
* Documentation/guides/cpp_cmake.rst
* Kconfig
* arch/arm/src/imxrt/imxrt_lpspi.c
* arch/arm/src/kinetis/kinetis_spi.c
* arch/arm/src/kl/kl_spi.c
* arch/arm/src/lpc31xx/lpc31_spi.c
* arch/arm/src/nrf52/nrf52_radio.h
* arch/arm/src/s32k1xx/s32k1xx_lpspi.c
* arch/arm/src/stm32/Kconfig
* arch/arm/src/stm32/stm32_adc.c
* arch/arm/src/stm32/stm32_foc.c
* arch/arm/src/stm32/stm32_foc.h
* arch/arm/src/stm32/stm32_pwm.c
* arch/arm/src/stm32/stm32_spi.c
* arch/arm/src/stm32f0l0g0/stm32_spi.c
* arch/arm/src/stm32f7/Kconfig
* arch/arm/src/stm32f7/stm32_spi.c
* arch/arm/src/stm32h7/Kconfig
* arch/arm/src/stm32h7/stm32_allocateheap.c
* arch/arm/src/stm32h7/stm32_fmc.c
* arch/arm/src/stm32h7/stm32_fmc.h
* arch/arm/src/stm32h7/stm32_pwm.c
* arch/arm/src/stm32h7/stm32_qspi.c
* arch/arm/src/stm32h7/stm32_spi.c
* arch/arm/src/stm32l4/stm32l4_pwm.c
* arch/arm/src/stm32l4/stm32l4_spi.c
* arch/arm/src/stm32l5/Kconfig
* arch/arm/src/stm32l5/stm32l5_spi.c
* arch/renesas/src/rx65n/rx65n_dtc.c
* arch/renesas/src/rx65n/rx65n_usbdev.c
* arch/risc-v/src/rv32m1/rv32m1_serial.c
* boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
* boards/arm/stm32/nucleo-f103rb/src/stm32_foc_ihm07m1.c
* boards/arm/stm32/nucleo-f302r8/src/stm32_foc_ihm07m1.c
* boards/arm/stm32h7/nucleo-h743zi2/README.txt
* boards/risc-v/rv32m1/rv32m1-vega/README.txt
* boards/sim/sim/sim/scripts/Make.defs
* drivers/1wire/1wire.c
* drivers/1wire/1wire_internal.h
* drivers/lcd/Kconfig
* drivers/syslog/ramlog.c
* fs/fat/Kconfig
* libs/libc/debug/Kconfig
* libs/libc/machine/Kconfig
* libs/libc/stdio/lib_libvsprintf.c
* libs/libc/stdlib/lib_div.c
* libs/libc/stdlib/lib_ldiv.c
* libs/libc/stdlib/lib_lldiv.c
* libs/libdsp/lib_observer.c
2021-07-04 11:23:26 -05:00
Xiang Xiao
1b5341f6c0
boards/bl602: Fix uart_nx.c:419: undefined reference to `uart_bth4_register'
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-07-01 05:01:21 -05:00
xiewenxiang
5fd3eca9c9
riscv/esp32c3: Support BLE sleep mode
2021-06-28 23:14:30 -05:00
xiewenxiang
145d917587
riscv/esp32c3: Add Wi-Fi and BLE coexist
2021-06-28 23:14:30 -05:00
xiewenxiang
8b96edc3a5
riscv/esp32c3: Add esp32c3 BLE driver
2021-06-28 23:14:30 -05:00
Virus.V
8452c571ec
risc-v/bl602: BLE firmware adapts to the new framework
...
Signed-off-by: Virus.V <virusv@live.com>
2021-06-28 07:03:04 -05:00
Virus.V
cd50650583
risc-v/bl602: Support AP and STA as independent network interface device
...
Signed-off-by: Virus.V <virusv@live.com>
2021-06-28 07:03:04 -05:00
Abdelatif Guettouche
11ed8575cd
boards/rsic-v/esp32c3: Use the common gnu-elf.ld file from binfmt/libelf
...
instead of keeping the same file for each board.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-24 08:04:14 -05:00
Abdelatif Guettouche
eb403bc996
boards/riscv/esp32c3: Rename the iram_0_2 segment to irom_0_0 to avoid
...
confusions.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-24 07:00:51 -05:00
Abdelatif Guettouche
60da4317b9
arch/risc-v/esp32c3: Use the same naming for the RTC heap as ESP32 for
...
consistency.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-23 08:37:01 +09:00
Liu Han
2dd081ed7d
risc-v/esp32c3: Support ESP32-C3 SHA accelerator
2021-06-21 02:41:53 -05:00
Abdelatif Guettouche
af5e0c620f
Rename MODULE_TEXT to TEXT_HEAP as the latter is more generic.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-18 07:14:17 -05:00
Abdelatif Guettouche
f54804bafc
arch/risc-v/esp32c3: Create a separate heap for the RTC memory.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-18 00:53:42 -05:00
Abdelatif Guettouche
965a39a76d
boards/risc-v/esp32c3-devkit: Include "config.h" in esp32c3_boot.c
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-18 00:53:42 -05:00
Abdelatif Guettouche
bd0e03fecf
boards/risc-v/esp32c3-devkit/esp32c3.ld: Add the RTC BSS section for
...
completeness.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-18 00:53:42 -05:00
Abdelatif Guettouche
61f7bc6e2a
boards/risc-v/esp32c3-devkit/scripts: Drop the "iram" in the name of the RTC
...
section.
The RTC region is accessed by both I and D buses. The old name of
`rtc_iram_seg` is a bit confusing.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-18 00:53:42 -05:00
Liu Han
04c805207a
risc-v/esp32c3: Support ESP32-C3 efuse
2021-06-16 09:35:09 -03:00
Liu Han
8eaaf6d462
risc-v/esp32c3: Support ESP32-C3 RSA accelerator
2021-06-14 15:03:11 -03:00
Eero Nurkkala
1bce864ef7
mpfs: add i2c driver
...
This adds mpfs i2c driver.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-06-11 21:03:42 -05:00
Eero Nurkkala
fad34e04c4
mpfs: add spi driver
...
This adds the SPI driver for the MPFS Icicle board.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-06-11 09:10:03 -05:00
Chen Wen
dbf9c87a42
risc-v/esp32c3: Support ESP32-C3 RTC driver
2021-06-10 09:33:04 -03:00
Xiang Xiao
5b2a17b892
Include assert.h in necessary place
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-08 13:06:08 -07:00
unixjet
68f19a6290
risc-v/rv32m1: Basic port to rv32m1 ri5cy
2021-06-05 17:25:57 -03:00
Gustavo Henrique Nihei
0b3c2c7603
spi: Refactor SPI Slave interface prefix to sync with I2C Slave
2021-06-05 04:50:34 -07:00
Abdelatif Guettouche
f00deae9ac
boards/esp32c3-devkit: Add a defconfig to test the shared library
...
example.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-04 18:08:36 -03:00
Abdelatif Guettouche
dd4962b2f8
boards/esp32c3-devkit: Add the necessary flags for loadable modules and
...
a module defconfig to test the "module" example.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-04 18:08:36 -03:00
Abdelatif Guettouche
3b7ae20843
boards/risc-v/esp32c3-devkit: Add an ELF defconfig and the necessary ELF
...
flags and linker script to support that.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-06-04 18:08:36 -03:00
Xiang Xiao
2e54df0f35
Don't include assert.h from public header file
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-03 08:36:03 -07:00
YAMAMOTO Takashi
c20ed229b1
refresh configs
2021-06-03 10:05:33 -05:00
Xiang Xiao
d7f96003cf
Don't include debug.h from public header file
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-01 06:42:02 +09:00
Gustavo Henrique Nihei
8a41d849df
drivers/spi: Change prefix to a more intuitive "spislave"
2021-05-31 07:54:08 -07:00
Gustavo Henrique Nihei
8914646c27
board/esp32c3-devkit: Add support for SPI Slave chardev driver
2021-05-31 12:54:15 +01:00
Virus.V
c6317650f9
risc-v/bl602: Add RTC support
2021-05-26 20:03:19 -03:00
Dong Heng
73dcbac09d
riscv/esp32c3: Add ESP32-C3 AES driver
2021-05-25 11:02:59 -03:00
Govind Singh
1e4490f127
boards: maix-bit: Update README.txt with updated clone path
...
Update apps clone path to avoid below error seen due to
expected relative path.
tools/Makefile.unix:329: recipe for target 'dirlinks' failed
make: *** [dirlinks] Error 2
ERROR: failed to refresh
Signed-off-by: Govind Singh <govind.sk85@gmail.com>
2021-05-25 01:37:28 -05:00
Janne Rosberg
d6205642ab
add support for PolarFire SoC and icicle board
...
Co-authored-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2021-05-24 22:55:44 -05:00
Dong Heng
76df958e34
riscv/esp32c3: Support SPI Flash encryption read/write
2021-05-23 08:37:25 -03:00
Huang Qi
f4a0b7aedd
libc: Call pthread_exit in user-space by up_pthread_exit
...
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2021-05-21 22:46:52 -06:00
Huang Qi
103925b2b7
boards/risc-v/c906: Remove unneeded pthread_start
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2021-05-21 22:46:52 -06:00
Gregory Nutt
bb9b58bdde
libc: Move pthread_create to user space
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Change-Id: I5c447d94077debc79158686935f288e4c8e51e01
2021-05-21 22:46:52 -06:00
chenwen
9a99d813fa
risc-v/esp32c3: Support ESP32-C3 auto-sleep
2021-05-19 07:00:40 -03:00
Dong Heng
f12de4f7d9
riscv/esp32c3: Add ESP32-C3 ADC driver
2021-05-18 09:20:46 -03:00
Dong Heng
beed26b6bf
riscv/esp32c3: Add ESP32-C3 LEDC(PWM) driver
2021-05-15 08:38:37 -03:00
Xiang Xiao
11ef8a3201
board: Enable CONFIG_BOARDCTL_ROMDISK
...
to fix build break by commit 3156aa7532
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-05-13 10:44:16 -05:00
chenwen
16667930cb
risc-v/esp32c3: Support ESP32-C3 PM standby and sleep
2021-05-12 10:15:06 -03:00
Abdelatif Guettouche
df7bd125f8
boards/risc-v/esp32c3: Convert the README.txt to the new Documentation.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-05-12 04:40:41 -07:00
Dong Heng
bd8e37bb4b
risc-v/esp32c3: Add ESP32-C3 (G)DMA driver and testing
2021-05-07 16:46:41 -03:00
Gustavo Henrique Nihei
4f08f43a6d
boards/esp32c3-devkit: Increase MAX_TASKS to 16 on nsh/ostest configs
...
This fixes the barrier test from ostest application
2021-04-30 17:55:30 +01:00
Dong Heng
fcd5648bca
riscv/esp32c3: Fix SPI Flash driver internal chip data address error
...
"g_rom_flashchip" is not in fixed address between all ESP32-C3's different versions.
2021-04-28 09:58:16 -05:00
Gustavo Henrique Nihei
66a15a6f83
risc-v/esp32c3: Fix wrong references to ESP32
2021-04-28 15:41:30 +01:00
Gustavo Henrique Nihei
ba23526e39
boards/esp32c3-devkit: Allocate .noinit in a dedicated section
...
Previously it was being allocated into .bss section after the _ebss
address. Although functional, this is not intuitive.
2021-04-28 15:40:49 +01:00
Gustavo Henrique Nihei
2fd98c99d7
boards/esp32c3-devkit: Add SPI character device driver
2021-04-26 20:50:32 -03:00
Gustavo Henrique Nihei
e0f514171b
boards/esp32c3-devkit: Add board-specific SPI functions
2021-04-26 20:50:32 -03:00
Masayuki Ishikawa
b17ee3fe29
boards: maix-bit: Add smp2 configuration
...
Summary:
- This commit adds maix-bit:smp2 configuration to test different
sched parameters such as CONFIG_SCHED_CHILD_STATUS=y
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-23 03:25:14 -05:00
Sara Souza
7a80cbf93f
risc-v/esp32-c3: Adds oneshot timer driver.
2021-04-22 09:13:58 +01:00
Abdelatif Guettouche
f43f066018
boards: Update the iperf configs.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-04-21 13:44:18 -05:00
Masayuki Ishikawa
1e6fd0871f
boards: maix-bit: Add _default_stack_limit to the linker script
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-19 01:09:22 -05:00
Masayuki Ishikawa
17149fbb38
boards: hifive1-revb: Add _default_stack_limit to the linker scripts
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-19 01:05:40 -05:00
hotislandn
60b56121b6
boards:rv64:c906:add sotest demo for smartl-c906.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-04-17 19:07:13 +01:00
hotislandn
d0c31f09e7
arch:rv64:c906:add configuration for kernel module test.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-04-15 11:04:51 -05:00
Abdelatif Guettouche
ad43d9e8f3
boards/esp32c3-devkit: Add an OSTest defconfig.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-04-13 12:07:56 -03:00
Dong Heng
31854ca135
riscv/esp32c3: Fix heap end address
2021-04-12 01:36:11 -05:00
Masayuki Ishikawa
f2a57b612a
boards: maix-bit: Add knsh_smp
...
Summary:
- This commit adds knsh_smp for maix-bit
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-09 03:12:50 -05:00
Gustavo Henrique Nihei
2efae6928d
drivers/input: Rename BUTTONS configs to INPUT_BUTTONS
2021-04-08 14:41:22 -03:00
Xiang Xiao
5f3a98b5a8
libc/assert: Reference the expression in all case
...
to avoid the warning "defined but not used"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I55b7c092d0f2e5882fc1784987657c10cdf2d90b
2021-04-03 21:00:41 +01:00
Alan Carvalho de Assis
b4129f8989
esp32c3-devkit: Add random example board config
2021-04-03 07:20:03 -05:00
Alin Jerpelea
3d96d5f2ce
arch: esp32: Mixed Case identifier fix
...
Fix Mixed Case Identifier reported by nxstyle
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-01 12:13:12 -05:00
chenwen
91eb70b5ef
risc-v/esp32c3: Support ESP32-C3 wireless ioctl cmd
2021-03-30 12:29:11 -05:00
Virus.V
f9997bdfb3
risc-v/bl602: fix _heap_start not word align
2021-03-30 01:11:09 -05:00
Brennan Ashton
0a3b20e546
syslog: Drop extra carriage return from syslog calls
2021-03-28 21:24:00 -05:00
hotislandn
6aa86b469c
arch:rv64:c906:add PMP, change mem map for protect build.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-03-28 09:02:48 -05:00
Alan Carvalho de Assis
76c02afc48
esp32c3-devkit: Add board support for SPIFlash
...
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-03-26 09:19:25 +01:00
Alan Carvalho de Assis
4f8ff0765f
risc-v/esp32c3: Add SPIFlash support
...
Co-Authored-By: Dong Heng <dongheng@espressif.com>
Co-authored-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-03-26 09:19:25 +01:00
Virus.V
7c80826c21
risc-v/bl602: Add wifi and ble support
...
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
2021-03-25 01:38:45 -07:00
Masayuki Ishikawa
9cce09e58a
boards: Remove SCHED_INSTRUMENTATION from all SMP related configs
...
Summary:
- This commit removes SCHED_INSTRUMENTATION which has been used
to debug NuttX SMP kernel
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-03-22 19:47:56 -07:00
Abdelatif Guettouche
fb0fd36a5c
arch/risc-v: Internal functions should be prefixed by "riscv_" instead
...
of "up_"
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-03-20 13:02:54 -03:00
Alin Jerpelea
6f14299dd0
boards: nxstyle fixes
...
nxstyle fixes to pass the CI check
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-18 22:58:27 -07:00
Jiuzhu Dong
59eb4fa8d6
fs: delete NFILE_DESCRIPTORS for allocating dynamically
...
Change-Id: Id06d215063796d222b9792d25ab2d6742167729f
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-03-17 06:46:42 -07:00
Gustavo Henrique Nihei
a93d538f3b
boards/esp32c3-devkit: Use nx_mount to avoid overriding errno
2021-03-16 19:49:21 -07:00
hotislandn
fb7a5b86ca
arch:rv64:c906:demo protect build without PMP.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-03-16 11:43:10 -03:00
Dong Heng
458caf2732
riscv/esp32c3: Add ESP32-C3 WLAN netcard driver
2021-03-16 10:42:32 -03:00
Masayuki Ishikawa
d90f868b60
boards: risc-v: Author Masayuki Ishikawa: Update license to Apache
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-03-12 16:15:44 +08:00
Gustavo Henrique Nihei
8517168336
boards/esp32c3-devkit: Add support for BMP180 sensor
2021-03-11 19:32:03 -03:00
Gustavo Henrique Nihei
4099c1d75d
boards/esp32c3: Create configuration for I2C testing
2021-03-11 19:32:03 -03:00
Gustavo Henrique Nihei
abab83b216
boards/esp32c3-devkit: Add support for I2C on board bringup
2021-03-11 19:32:03 -03:00
Xiang Xiao
c047c1412f
Remove all gap8(risc-v) arch and board source code
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-03-11 10:51:11 -08:00
Xiang Xiao
c54d617f2c
Remove nr5m100(risc-v) arch and board source code
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-03-11 10:51:11 -08:00
hotislandn
f71c5e5324
board:rv64:c906:support ELF apps.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-03-11 14:37:30 -03:00
hotislandn
d898bc445c
arch:rv64:c906:enable DP FPU support.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-03-11 10:34:47 +08:00
hotislandn
5e50938726
arch:riscv64:basic porting for C906.
...
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-03-10 19:23:24 +08:00
Gustavo Henrique Nihei
330eff36d7
sourcefiles: Fix relative path in file header
2021-03-09 23:18:28 +08:00
Gustavo Henrique Nihei
13535d8725
linkerfiles: Fix relative path in file header
2021-03-09 23:18:28 +08:00
Gustavo Henrique Nihei
47cb41c92f
makefiles: Fix relative path in file header
2021-03-09 23:18:28 +08:00
Sara Souza
85a93be5d7
risc-v/esp32-c3: Adds timer driver
2021-03-09 11:16:53 -03:00
Alin Jerpelea
0a797f1e8b
boards: Makefile: Author Gregory Nutt: update licenses to Apache
...
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-05 04:08:55 -08:00
Xiang Xiao
9473434587
Ensure the kernel component don't call userspace API
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-03-01 09:23:09 +09:00
Gustavo Henrique Nihei
7fe096c65e
risc-v: Fix typos reported by codespell
2021-02-25 16:25:47 +00:00
Abdelatif Guettouche
fb68a4b777
esp32c3: Add system reset.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-02-23 18:13:02 -08:00
Dong Heng
7c9c9907ef
boards/esp32c3: Add tmpfs mounting when bringing up
2021-02-23 00:41:08 -08:00
Gustavo Henrique Nihei
291a5755cc
risc-v/esp32c3: Add support for MWDT0 and MWDT1
2021-02-22 17:18:01 +00:00
Abdelatif Guettouche
10fca18b55
boards/*/esp32: Add instructions on how to use the configs with QEMU.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-02-21 09:57:01 -08:00
Abdelatif Guettouche
067da56d0c
esp32c3: Some cosmetics and style fixes.
...
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-02-21 10:29:43 -03:00