Gregory Nutt
|
ef5531b30b
|
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
|
2015-07-04 13:18:30 -06:00 |
|
Gregory Nutt
|
724c1eacaa
|
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
|
2015-07-04 10:39:24 -06:00 |
|
Gregory Nutt
|
2e5bef56f2
|
SAMD20/1: Fix some typos found by inspecting header files
|
2015-07-04 07:19:52 -06:00 |
|
Gregory Nutt
|
b8976adfb3
|
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
|
2015-07-03 09:33:52 -06:00 |
|
Gregory Nutt
|
797aa0a138
|
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
|
2015-07-03 06:53:51 -06:00 |
|
Gregory Nutt
|
004c076985
|
Correct some issues introduced in the last commit
|
2015-07-02 17:54:05 -06:00 |
|
Gregory Nutt
|
c3290fdabd
|
Modify board_power_off() so that is is called only via boardctl()
|
2015-07-02 17:09:54 -06:00 |
|
Gregory Nutt
|
19320d157a
|
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
|
2015-07-02 16:25:31 -06:00 |
|
Gregory Nutt
|
51df91e93d
|
STM32 RTCC: Eliminate a warning when ALARM support is enabled
|
2015-07-02 15:02:59 -06:00 |
|
Gregory Nutt
|
1839d132f0
|
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
|
2015-07-02 11:13:23 -06:00 |
|
Gregory Nutt
|
46fec91b12
|
Remove a warning
|
2015-07-01 18:25:13 -06:00 |
|
Gregory Nutt
|
6df1d2823f
|
Fix misc. compilation error/warning detected by tools/testbuild.sh
|
2015-07-01 14:33:37 -06:00 |
|
Gregory Nutt
|
dbc5f910fc
|
Fix some typos in header files
|
2015-07-01 11:45:08 -06:00 |
|
Gregory Nutt
|
c73745bede
|
lpc214x USB device: Fix a warning
|
2015-07-01 10:25:14 -06:00 |
|
Gregory Nutt
|
d20dbf5054
|
LPC17xx: Fix a warning about an unused local variable
|
2015-07-01 09:36:39 -06:00 |
|
Gregory Nutt
|
92f9876f75
|
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
|
2015-07-01 08:34:51 -06:00 |
|
Gregory Nutt
|
77285beeca
|
DM320: GIO header uses get/putreg functions and so should include up_arch.h
|
2015-07-01 08:01:49 -06:00 |
|
Gregory Nutt
|
a1676a177d
|
arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected.
|
2015-07-01 07:04:02 -06:00 |
|
Alan Carvalho de Assis
|
928c88a5f6
|
Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis
|
2015-06-30 11:42:48 -06:00 |
|
Alan Carvalho de Assis
|
39b77fbe8b
|
Fix Cortex-M0 assembly error when the interrupt stack is enabled
|
2015-06-30 08:41:47 -06:00 |
|
Gregory Nutt
|
fb926e7283
|
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
|
2015-06-28 08:08:57 -06:00 |
|
Gregory Nutt
|
27bdf5d8a1
|
SAMD21: Update SPI and I2C header files for SAMD21 support
|
2015-06-22 13:12:00 -06:00 |
|
Max Neklyudov
|
8438b8eee8
|
SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
|
2015-06-22 09:32:15 -06:00 |
|
Gregory Nutt
|
911b1ce68e
|
SAMD21: Update WDT and EVSYS header files for SAMD21 support
|
2015-06-22 09:15:54 -06:00 |
|
Gregory Nutt
|
52803ee23b
|
Back out another error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc().
|
2015-06-22 07:48:29 -06:00 |
|
Max Neklyudov
|
0f19a33b3d
|
SAM4CM: Fix SUPC register definitions. From Max Neklyudov
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
|
2015-06-22 06:52:57 -06:00 |
|
Max Neklyudov
|
e4d7b311b7
|
sam4cm: add CFB and MAC AES modes. From Max Neklyudov
|
2015-06-22 06:42:37 -06:00 |
|
Max Neklyudov
|
bdf0b6a9ab
|
Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov.
|
2015-06-22 06:19:45 -06:00 |
|
Gregory Nutt
|
c5bc7cc120
|
SAMD21: Update SAMD SYSCTRL and NVMCTRL definitions for the SAMD21
|
2015-06-21 11:40:23 -06:00 |
|
Gregory Nutt
|
e7e7b465d5
|
SAMD21: Update fuse definitions for the SAMD21
|
2015-06-21 10:20:23 -06:00 |
|
Gregory Nutt
|
4a38276ff9
|
SAMD21: Extend SAMD USART support to include SAMD21 differences
|
2015-06-21 09:17:01 -06:00 |
|
Gregory Nutt
|
780cb0911d
|
Add board configuration for the SAMD21 Xplained board
|
2015-06-21 07:48:46 -06:00 |
|
Gregory Nutt
|
379a1e114f
|
SAMD21: Add pin multiplexing definitions
|
2015-06-20 18:55:23 -06:00 |
|
Gregory Nutt
|
97d697f7c4
|
SAMD2x: Eliminate a warning
|
2015-06-20 16:06:01 -06:00 |
|
Gregory Nutt
|
5eeabf29dd
|
Missed a few in previous commit
|
2015-06-20 15:55:56 -06:00 |
|
Gregory Nutt
|
1d3abb18e4
|
SAMD21: Update GCLKs for SAMD21
|
2015-06-20 15:55:21 -06:00 |
|
Gregory Nutt
|
d9863f11f6
|
SAMD21: Update PM definitions for SAMD21 support
|
2015-06-20 15:32:57 -06:00 |
|
Gregory Nutt
|
28ae44eb02
|
SAMD21: Add memory map header file
|
2015-06-20 15:02:25 -06:00 |
|
Gregory Nutt
|
66a960dacd
|
SAMD21: Add interrupt vectors definitions
|
2015-06-20 14:40:47 -06:00 |
|
Gregory Nutt
|
15c8e2e00a
|
SAMD21: Add interrupt vectors definitions
|
2015-06-20 14:40:36 -06:00 |
|
Gregory Nutt
|
d00ed2d780
|
Add configuration support for SAMD21
|
2015-06-20 14:31:53 -06:00 |
|
Gregory Nutt
|
e013bb49a8
|
SAML21 USB: Add host side register defintiions
|
2015-06-20 11:09:35 -06:00 |
|
Gregory Nutt
|
d298b8048c
|
SAML21 USB: Add device side register defintiions
|
2015-06-20 09:25:06 -06:00 |
|
Gregory Nutt
|
b6629c0745
|
SAML21: Partial USB header file
|
2015-06-20 07:13:35 -06:00 |
|
Gregory Nutt
|
b39cd9ee93
|
Refresh SAMV71-Xult configurations
|
2015-06-17 12:01:33 -06:00 |
|
Gregory Nutt
|
ad7eb4e24f
|
Update some comments
|
2015-06-17 06:31:30 -06:00 |
|
Gregory Nutt
|
3c06202152
|
SAM4L DMA: Need separate peripheral IDs for TX and RX
|
2015-06-17 06:23:07 -06:00 |
|
Alan Carvalho de Assis
|
2a10db2dbf
|
SAMA5D TWI: Fix typo in driver initialization logic.
|
2015-06-17 06:13:46 -06:00 |
|
Gregory Nutt
|
a5175456ed
|
SAML21: Add OPAMP register definition header file
|
2015-06-16 15:54:49 -06:00 |
|
Gregory Nutt
|
61543db536
|
SAML21: Add DAC register definition header file
|
2015-06-16 13:32:27 -06:00 |
|
Gregory Nutt
|
5ee4cf6ae4
|
SAML21: Add AES register definition header file
|
2015-06-16 12:22:49 -06:00 |
|
Gregory Nutt
|
b5cc782205
|
SAML21 DMAC: Mostly cosmetic changes
|
2015-06-16 10:39:21 -06:00 |
|
Gregory Nutt
|
08dcb6dc8d
|
SAML21 DMA: Fix a logic error. Since the write back descriptors overly the base descriptors, we need to do some special things in order to correctly free any allocated descriptors
|
2015-06-16 10:07:26 -06:00 |
|
Gregory Nutt
|
12ca013ff4
|
SAMV7: Add RTC register definition header file
|
2015-06-16 07:23:47 -06:00 |
|
Gregory Nutt
|
b1230eb951
|
Fix a comment
|
2015-06-15 15:09:23 -06:00 |
|
Gregory Nutt
|
48b7631dbb
|
SAMV7: Add MCAN register definition header file
|
2015-06-15 11:37:59 -06:00 |
|
Gregory Nutt
|
9511364a03
|
SAML21 minor stuff
|
2015-06-14 14:27:58 -06:00 |
|
Gregory Nutt
|
01c5c63369
|
SAML21: Completes first rought cut of DMAC driver
|
2015-06-14 13:29:59 -06:00 |
|
Gregory Nutt
|
4f8db55462
|
SAML21 DMA: BASEADDR and WRBADDR can only be written while the DMAC is disabled
|
2015-06-14 11:46:44 -06:00 |
|
Gregory Nutt
|
fb6252aa6f
|
SAML21 DMA: More DMA logic. Still incomplete
|
2015-06-14 11:26:52 -06:00 |
|
Gregory Nutt
|
c2f2919ab0
|
SAML21 DMA: Add logic to set up base and writeback table addresses
|
2015-06-14 10:51:10 -06:00 |
|
Gregory Nutt
|
1f6f3d7bb2
|
Fix reversed arguments in SAML21 DMA logic
|
2015-06-14 08:52:39 -06:00 |
|
Gregory Nutt
|
75077f4728
|
SAML21: Add DMA descriptor management logic
|
2015-06-14 08:48:25 -06:00 |
|
Gregory Nutt
|
8c8b2d926b
|
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
|
2015-06-13 15:06:37 -06:00 |
|
Gregory Nutt
|
26518df3ed
|
SAML21: Add DMAC register definition header file
|
2015-06-13 10:16:07 -06:00 |
|
Gregory Nutt
|
29136e51cc
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
|
Gregory Nutt
|
c07a9632cc
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:17:42 -06:00 |
|
Gregory Nutt
|
7bd3d5eaf1
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
Gregory Nutt
|
d6ce8220fd
|
Clean up and review of header files for conformance to standards
|
2015-06-12 18:07:47 -06:00 |
|
Gregory Nutt
|
46148524a9
|
SAM4S/4E: Eand default loop optimiozation if EEFC_FMR configuration. From Marco Aurélio da Cruz
|
2015-06-11 14:35:49 -06:00 |
|
Gregory Nutt
|
4b11c9da2c
|
Kinetis: Add up-sysemreset.c to Make.defs
|
2015-06-11 12:08:45 -06:00 |
|
Gregory Nutt
|
4712c23218
|
Make some imported files a little closer to the NuttX coding standard
|
2015-06-11 09:14:44 -06:00 |
|
Gregory Nutt
|
85d88d364f
|
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
|
2015-06-11 08:39:40 -06:00 |
|
Gregory Nutt
|
7fab748667
|
STL32 F15x: stm32_stdclockconfig() was calling stm32_pw_setvos() which accessed PWR_CR via an inactive APB. From Juha Niskanen.
|
2015-06-11 08:09:36 -06:00 |
|
Gregory Nutt
|
98b2034cdf
|
Teensy-3.1: Add user LED support
|
2015-06-10 17:19:26 -06:00 |
|
Gregory Nutt
|
ad2a529624
|
RAM functions should have noinline attribute
|
2015-06-10 14:51:42 -06:00 |
|
Gregory Nutt
|
cb1a6e7954
|
Cosmetic
|
2015-06-10 14:20:11 -06:00 |
|
Gregory Nutt
|
0742ee3c3e
|
Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed for backward compatible support for Teensy-3.0
|
2015-06-10 11:45:17 -06:00 |
|
Gregory Nutt
|
075261f5ee
|
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
|
2015-06-10 08:38:35 -06:00 |
|
Gregory Nutt
|
9be151cdbb
|
SAML21: A different SLOW clock must be used with SERCOM5
|
2015-06-10 08:18:05 -06:00 |
|
Gregory Nutt
|
f01c04f1a7
|
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
|
2015-06-09 18:01:32 -06:00 |
|
Gregory Nutt
|
d1847d2e0b
|
Correct write to incorrect register in EFM32 SPI driver. From Pierre-noel Bouteville.
|
2015-06-09 12:50:30 -06:00 |
|
Gregory Nutt
|
13e8c0d5b1
|
Update/add README.txt files
|
2015-06-09 07:03:25 -06:00 |
|
Gregory Nutt
|
f3425d6298
|
Fix SAMA5 CAN frame construction. From Max Holtzberg.
|
2015-06-07 13:13:44 -06:00 |
|
Gregory Nutt
|
f875a26ed2
|
Add SPI GPIO pin initialization. From Pierre-noel Bouteville.
|
2015-06-05 14:26:21 -06:00 |
|
Gregory Nutt
|
0488df7cf3
|
Correct some comments. Noted by Jouko Holopainen
|
2015-06-04 08:12:58 -06:00 |
|
Gregory Nutt
|
e816afe161
|
LC17 Ethernet: Ignore 4-bit versin number when checking for PHY ID match
|
2015-06-03 19:47:10 -06:00 |
|
Gregory Nutt
|
03562269d4
|
Lincoln60: Add a network enabled NXH configuration (still does not yet build)
|
2015-06-03 18:48:08 -06:00 |
|
Gregory Nutt
|
7677cf72eb
|
LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY.
|
2015-06-03 17:34:36 -06:00 |
|
Gregory Nutt
|
d9d6ff1d1b
|
Fix some memory sizing errors in refreshed defconfig files
|
2015-06-02 08:44:57 -06:00 |
|
Gregory Nutt
|
e6b8d2eebe
|
Refresh some Olimex LPC1766STK networking configurations
|
2015-06-02 08:12:44 -06:00 |
|
Gregory Nutt
|
1d697a18d1
|
Condition default value for CONFIG_ARMV7M_TARGET2_PREL on UCLIBCXX_EXCEPTION
|
2015-06-01 15:12:33 -06:00 |
|
Gregory Nutt
|
280e2ee385
|
Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132
|
2015-06-01 14:16:18 -06:00 |
|
Gregory Nutt
|
73419e77f4
|
LPC17 Ethernet: Fix several compilation related issues when CONFIG_NET_NOINTS=y
|
2015-06-01 08:35:40 -06:00 |
|
Gregory Nutt
|
29b6f140e3
|
LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation
|
2015-06-01 08:07:32 -06:00 |
|
Gregory Nutt
|
0c59dd2888
|
Fix a missing # in the previous commit
|
2015-05-31 13:26:13 -06:00 |
|
Gregory Nutt
|
4e811aa54d
|
Add basic support for the STM32F205RG. From SourceForge Ticket 40 (anonymous).
|
2015-05-31 13:06:26 -06:00 |
|
Gregory Nutt
|
38735fafeb
|
More missing semicolons after DEBUGASSERT
|
2015-05-27 13:32:39 -06:00 |
|
Gregory Nutt
|
d41b050526
|
Fix another missing semicolon after DEBUGASSERT
|
2015-05-27 11:49:19 -06:00 |
|
Gregory Nutt
|
d50761428c
|
LPC11: Fix hardcoded BAUD calculation. Is no configurable. From Alan Carvalho de Assis
|
2015-05-27 09:44:07 -06:00 |
|