SPI0 is used for the connection of the LCD controller.
Additional SPI and GPIO signals definitions:
SPI0_NPCS1 - SPI Chip Select, PD25
GPIO_LCD_CD - Command/Data, pin PB2
GPIO_LCD_RST - Reset, pin PB3
boards/arm/samv7/samv71-xult/src/sam_st7789.c is
derived from boards/arm/imxrt/teensy-4.x/src/imxrt_st7789.c
Signed-off-by: Jaroslav Beran <jara.beran@gmail.com>
Summary:
- This commit converts data to the physical address for DMA transfer.
Impact:
- cxd56_imageproc.c and cxd56_audio_dma.c
Testing:
- Not tested
Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In order to support the atomic instructions by ldrex/strex instruction
in NuttX SMP, the data or later sections are mapped to the system bus.
Impact:
- Bootloader for Spresense SDK 2.1.0 or later must be installed
- Loops per msec must be adjusted
- Physical address for DMA must be converted with CXD56_PHYSADDR
Testing:
- Will be tested with later commits
Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
by EXTRAFLAGS. This was supposed to be part of an old PR but this board
was left behind.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- This commit removes CONFIG_LIBM from defconfigs to use libm for gcc
Impact:
- Applications which use the math library
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
If the GPIO falls within 300us after raising
(or GPIO raises within 300us after falling), the modem may miss the GPIO
interrupt. So add delay by 300us before changing the GPIO.
When CONFIG_BOARD_RESET_ON_ASSERT is enabled, board_reset() may be
called on interrupt context. This commit changes to be able to call the
function on interrupt context.
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
- This commit adds ELF support to netnsh and netnsh_smp
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
Summary:
- This is just a workaround to avoid a crash in signest_test
- The commit should be reverted once we find the root cause of the issue
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>