Since littlefs is in active development, it's not a good idea to use its
source code files directly. So upgrade littlefs v2.2.1 by using the littlefs
tar.gz release package instead.
Change-Id: I16d9cf0b6bca700a54ca86ed11d7c8c7f27a898f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
lpc2148_spi1.c:142:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type 'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
142 | .send = spi_send,
| ^~~~~~~~
lpc2148_spi1.c:142:24: note: (near initialization for 'g_spiops.send')
In file included from ieee802154/mac802154_bind.c:49:
ieee802154/mac802154_internal.h: In function 'mac802154_setdevmode':
ieee802154/mac802154_internal.h:788:42: warning: converting a packed 'enum ieee802154_devmode_e' pointer (alignment 1) to a 'const union ieee802154_attr_u' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
788 | (FAR const union ieee802154_attr_u *)&mode);
| ^~~~~~~~~~~~~~~~~
chip/stm32_hciuart.c: In function 'hciuart_read':
chip/stm32_hciuart.c:2104:30: warning: statement with no effect [-Wunused-value]
2104 | ntotal == (ssize_t)ret;
| ~~~~~~~^~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_auth_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:579:23: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
579 | type = bcmf_getle32(&event->type);
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:580:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
580 | status = bcmf_getle32(&event->status);
| ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_scan_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:619:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
619 | status = bcmf_getle32(&event->status);
| ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:620:35: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
620 | escan_result_len = bcmf_getle32(&event->len);
| ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_bdc.c: In function 'bcmf_bdc_process_event_frame':
wireless/ieee80211/bcm43xxx/bcmf_bdc.c:166:27: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
166 | event_id = bcmf_getle32(&event_msg->event.type);
| ^~~~~~~~~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_direct':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:157:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
157 | ret = SDIO_RECVR5(dev, SD_ACMD52, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_extended':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:239:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
239 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:244:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
244 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:257:7: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
257 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:265:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
265 | SDIO_RECVR1(dev, SD_ACMD52ABRT, (uint32_t *)&resp);
| ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:2860:7: warning: unused variable 'ret' [-Wunused-variable]
2860 | int ret;
| ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:3044:7: warning: unused variable 'ret' [-Wunused-variable]
3044 | int ret;
| ^~~
chip/stm32_i2c.c:722:12: warning: 'stm32_i2c_sem_wait_noncancelable' defined but not used [-Wunused-function]
722 | static int stm32_i2c_sem_wait_noncancelable(FAR struct i2c_master_s *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wireless/gs2200m.c: In function 'gs2200m_read':
wireless/gs2200m.c:727:20: warning: passing argument 1 of 'nxsem_wait' from incompatible pointer type [-Wincompatible-pointer-types]
727 | ret = nxsem_wait(dev);
| ^~~
| |
| struct gs2200m_dev_s *
.config:1207:warning: symbol value '' invalid for TESTING_OSTEST_FPUSIZE
platform/audio/cxd56_audio_analog.c:69:13: warning: inline function 'cxd56_audio_clock_is_enabled' declared but never defined
69 | inline bool cxd56_audio_clock_is_enabled(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:68:13: warning: inline function 'cxd56_audio_clock_disable' declared but never defined
68 | inline void cxd56_audio_clock_disable(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:67:13: warning: inline function 'cxd56_audio_clock_enable' declared but never defined
67 | inline void cxd56_audio_clock_enable(uint32_t clk, uint32_t div);
| ^~~~~~~~~~~~~~~~~~~~~~~~
chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:1348:7: warning: unused variable 'ret' [-Wunused-variable]
1348 | int ret;
| ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:1496:7: warning: unused variable 'ret' [-Wunused-variable]
1496 | int ret;
| ^~~
chip/stm32_i2c.c:729:12: warning: 'stm32_i2c_sem_wait_uninterruptble' defined but not used [-Wunused-function]
729 | static int stm32_i2c_sem_wait_uninterruptble(FAR struct i2c_master_s *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wireless/lpwan/sx127x/sx127x.c:147:52: warning: missing terminating ' character
147 | # warning OOK support is not complete, RX+TX doesn't work yet!
| ^
str71_spi.c:435:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type
'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
435 | .send = spi_send,
| ^~~~~~~~
str71_spi.c:435:24: note: (near initialization for 'g_spiops.send')
chip/pic32mx-lowconsole.c:147:24: warning: 'pic32mx_getreg' defined but not used [-Wunused-function]
static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
^
chip/pic32mx-gpio.c:113:20: warning: 'pic32mx_value' defined but not used [-Wunused-function]
static inline bool pic32mx_value(uint16_t pinset)
^
chip/pic32mz-gpio.c:124:20: warning: 'pic32mz_value' defined but not used [-Wunused-function]
static inline bool pic32mz_value(pinset_t pinset)
^
chip/pic32mx-usbdev.c:3065:1: warning: 'pic32mx_epreserved' defined but not used [-Wunused-function]
pic32mx_epreserved(struct pic32mx_usbdev_s *priv, int epno)
^
mmcsd/mmcsd_spi.c: In function 'mmcsd_mediachanged':
mmcsd/mmcsd_spi.c:1938:7: warning: 'return' with a value, in function returning void
return ret;
^
In file included from partition/fs_partition.c:42:0:
partition/partition.h:66:19: warning: 'read_partition_block' defined but not used [-Wunused-function]
static inline int read_partition_block(FAR struct partition_state_s *state,
^
local/local_netpoll.c: In function 'local_pollsetup':
local/local_netpoll.c:305:1: warning: label 'pollerr' defined but not used [-Wunused-label]
pollerr:
^~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If3ea8f32b878aa218072130f7c3018f0d3c1aca5
arp/arp_notify.c:132:43: warning: for loop has empty body [-Wempty-body]
prev = curr, curr = curr->nt_flink);
^
sixlowpan/sixlowpan_tcpsend.c:806:31: warning: implicit conversion from 'unsigned int' to 'uint16_t' (aka 'unsigned short') changes value from 4294967295 to 65535 [-Wconstant-conversion]
_SO_TIMEOUT(psock->s_sndtimeo));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Numerous warnings like:
ieee802154_getreq.c:93:3: warning: implicit declaration of function 'memcpy' is invalid in C99 [-Wimplicit-function-declaration]
IEEE802154_EADDRCOPY(eaddr, req.attrval.mac.eaddr);
^
nxfonts/nxfonts_cache.c:839:35: warning: for loop has empty body [-Wempty-body]
fcache = fcache->flink);
bluetooth/bluetooth_finddev.c💯11: warning: implicit declaration of function 'memcmp' is invalid in C99 [-Wimplicit-function-declaration]
if (BLUETOOTH_ADDRCMP(dev->d_mac.radio.nv_addr, match->bf_addr))
^
rwbuffer.c:559:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (rwb->rhmaxblocks > 0 && rwb->rhnblocks > 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Run all files modified by PR 766 through nxstyle and fix any resulting complaints.
NOTE: Numerous "Mixed case identifier" errors in arch/arm/src/cxd56xx/cxd56_gnss.c were not fixed because this problem is of much larger scope than this file.
This commit resolves issue #620:
Remove CONFIG_CAN_PASS_STRUCTS #620
The configuration option CONFIG_CAN_PASS_STRUCTS was added many years ago to support an old version of the SDCC compiler. That compiler is currently used only with the Z80 and Z180 targets. The limitation of that old compiler was that it could not pass structures or unions as either inputs or outputs. For example:
#ifdef CONFIG_CAN_PASS_STRUCTS
struct mallinfo mallinfo(void);
#else
int mallinfo(FAR struct mallinfo *info);
#endif
And even leads to violation of a few POSIX interfaces like:
#ifdef CONFIG_CAN_PASS_STRUCTS
int sigqueue(int pid, int signo, union sigval value);
#else
int sigqueue(int pid, int signo, FAR void *sival_ptr);
#endif
This breaks the 1st INVIOLABLES rule:
Strict POSIX compliance
-----------------------
o Strict conformance to the portable standard OS interface as defined at
OpenGroup.org.
o A deeply embedded system requires some special support. Special
support must be minimized.
o The portable interface must never be compromised only for the sake of
expediency.
o Expediency or even improved performance are not justifications for
violation of the strict POSIX interface
Also, it appears that the current SDCC compilers have resolve this issue and so, perhaps, this is no longer a problem: z88dk/z88dk#1132
NOTE: This commit cannot pass the PR checks because it depends on matching changes to the apps/ directory.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/driver, fs/aio, fs/nfs, crypto/, and boards/.
Please note: The modified file under fs/nfs generates several " Mixed case identifier found" errors. Please ignore these. These cannot be fixed without changes to numerous other files. They also follow a non-standard convention that is used many files: Using lower case structure names in custom SIZEOF_ definitions.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/inode. Utility functions under fs/incode were modified so the changes do extend to other fs/ sub-directories as well.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/tmpfs and fs/spiffs. Still do do: The rest of fs/ and all of drivers/ and arch/.
This reverts commit b9ace36fcc.
This change was added by PR 625 but has a serious logic flaw. It removes all occurrences of INCDIROPT and replaces it with a definition in tools/Config.mk:
else ifeq ($(WINTOOL),y)
DEFINE = "$(TOPDIR)/tools/define.sh"
INCDIR = "$(TOPDIR)/tools/incdir.sh" -w
This logic flaw is the Config.mk is included in all Make.defs files BEFORE WINTOOL is defined. As a result, the definition is wrong in many places when building under Cygwin with a Windows native toolchain.
* fs/nfs: Remove all nfs_checkmount call. The check just waste cpu cycle since nobody will set nm_mounted to false, and remove the unused fields(nm_mounted and n_flags) and related flags too
* fs/nfs: Fix the definition not confirm to RFC 1813 and other minor issue(unused, typo, duplication, alignment...)
* fs/nfs: Always represent error with negative number and remove the unused arguments from function
* fs/nfs: Set socket receive timeout with nfs_args->timeo and fix warning:
nfs/nfs.h:59:28: warning: large integer implicitly truncated to unsigned type [-Woverflow]
#define NFS_TIMEO (1 * NFS_HZ) /* Default timeout = 1 second */
^
nfs/nfs_vfsops.c:1857:23: note: in expansion of macro 'NFS_TIMEO'
nprmt.timeo = NFS_TIMEO;
^
^~~~~~~~~
* fs/nfs: Update the file attribute correctly in nfs_filetruncate and simplify the attrbitue conversion between NFSv3 and NuttX
* fs/nfs: Remove the unfinished and buggy EXCLUSIVE creation mode
* fs/nfs: Call nfs_fsinfo in nfs_bind instead of nfs_statfs since we should update the buffer size before transfer happen, and handle the attribute existence variance correctly.
* fs/nfs: Shouldn't insert node into list again in nfs_dup and fix other typo issue
* fs/nfs: Should skip . and .. in nfs_readdir
* fs/nfs: Remove the unnecessary dynamic allocation and the duplicated root handle storage
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c and .h files and fix it
Author: Juha Niskanen <juha.niskanen@haltian.com>
Fix typos and some incorrect comments
1. No .c file should include a "Public Types" section. Only a header file can define a public type. A .c file can only define a private type. Several files contained private type definitions. The section that they were defined in, however, was incorrectly named "Public Types." Those were easilty changed to "Private Types" which is what they are.
2. No .c file should include a "Public Function Prototypes" section. All global function prototypes should be provided via a header file and never declared with a .c file.
For No. 2, I corrected as many cases as was reasonable for the time that I had available. But there are still a dozen or so .c files that declare "Public Function Prototypes" within a .c file. This is bad programming style. These declarations should all be moved to the proper header files.
Here is the email loop talk about why it is better to remove the option:
https://groups.google.com/forum/#!topic/nuttx/AaNkS7oU6R0
Change-Id: Ib66c037752149ad4b2787ef447f966c77aa12aad
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Author: Alan Carvalho de Assis <acassis@gmail.com>
Check all .c and .h against nxstyle and fix it.
Author: Alin Jerpelea <alin.jerpelea@sony.com>
fs: smartfs: Fix over capacity write
When the remaining capacity of flash is one sector, if a new root
directory is created by file open, then the root directory's chain is
broken and it causes to SmartFS filesystem crash. Once this fatal
problem occurs, it's impossible to recover even if the system reboot.
Fix it by finally update link of root directory.
fs: smartfs: Fix buffer overrun
fs: smartfs: Fix uninitialized variable warnings
fs: smartfs: Memory leak fix
boards: cxd56xx: Update spresense board.h
- Fix PMIC assignment
- Add specific pin configurations for spresense
- Remove unnecessary definitions
arch: cxd56xx: Add ITM syslog init at startup
arch: cxd56xx: Enable DMA settings dynamically
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
1.merge CONFIG_GIT_REVISION_STR into CONFIG_VERSION_BUILD
2.merge gen_getrev.sh into version.sh
3.generate version number if needed
Here is a sample output:
nsh> uname -a
NuttX 8.2 59fd8e12d3-dirty Dec 12 2019 15:48:00 sim sim
nsh> cat /proc/version
NuttX version 8.2 59fd8e12d3-dirty Dec 12 2019 15:48:01
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.
Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@pinecone.net>
include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.
Author: Gregory Nutt <gnutt@nuttx.org>
Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
tools/: Fix the minor issue in Makefile
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle.
tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste.
fs/hostfs: Add configure and build support for hostfs RPC.
drivers/timer: Add configure and build support for syslog RTC.
drivers/syslog: Add configure and build support for syslog RPC.
drivers/serial: Add configure and build support for serial RPC.
Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support.
drivers/rptun: Add configure and build support for OpenAMP tunnel drivers.
drivers/net: Update Make.defs and Kconfig for OpenSDA support.
Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now.
Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application.
Author: zhuyanlin <zhuyanlin@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Jianli Dong <dongjianli@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Guiding Li <liguiding@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
report git info on /proc/gitrev
* report git info on /proc/gitrev
git info reported: branch, version, git hash, hostname, usr, build date
* use existing .version and procfs for git info
* reduce script's coupling
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
Correct some additional compile-related issues.
Move include/nuttx/binfmt/builtin.h to include/nuttx/lib/builtin.h. Move apps/builtin/lib_builtin_forindex.c to libs/libc/builtin/lib_builtin_forindex.c.
Move binfmt/libbuiltin to libs/libc/builtin. There are calls made directly from apps/nshlib into this logic and hence, must be part of a library that can be shared between the OS and applications.
Iobinstrumentation
* mm/iob: Introduces producer/consumer id to every iob call. This is so that the calls can be instrumented to monitor the IOB resources.
* iob instrumentation - Merges producer/consumer enumeration for simpler IOB user.
* fs/procfs: Starts adding support for /proc/iobinfo
* fs/procfs: Finishes first pass of simple IOB user stastics and /proc/iobinfo entry
Approved-by: Gregory Nutt <gnutt@nuttx.org>
