Gregory Nutt
2ff1b173f2
SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand
2015-11-11 08:15:08 -06:00
Gregory Nutt
f86ca94798
Update submodule
2015-11-10 17:45:06 -06:00
Gregory Nutt
08200d8f86
S24FL1: Fix so that the driver compiles with 512 byte block support
2015-11-10 13:34:33 -06:00
Gregory Nutt
eb1191df63
S24FL1: Fix an error in the page write logic
2015-11-10 12:48:29 -06:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
1ed69cd535
Fix another corner case in the upper half CAN driver
2015-11-10 07:41:40 -06:00
Gregory Nutt
d6cc75dc64
Update submodules
2015-11-09 13:33:53 -06:00
Gregory Nutt
896834002a
BCH driver should forward ioctl commands to the contained block driver
2015-11-09 11:47:25 -06:00
Gregory Nutt
2ab0832c26
Smart MTD: fix some outdated logic: geometray erase size is now 32-bits
2015-11-09 09:35:14 -06:00
Gregory Nutt
95562f8a86
CAN driver: More improved comments
2015-11-08 07:43:57 -06:00
Gregory Nutt
874862abb9
CAN driver: Improve some comments
2015-11-08 07:00:09 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Gregory Nutt
b2bdba0824
S25FL1 FLASH driver: Fix return value from the bwrite() method
2015-11-07 11:26:53 -06:00
Gregory Nutt
41337324ba
Update submodules
2015-11-06 13:03:07 -06:00
Gregory Nutt
f5b82db9b0
Update ChangeLog
2015-11-06 11:14:33 -06:00
Gregory Nutt
8b0a5955fd
Update submodule
2015-11-05 11:27:00 -06:00
Gregory Nutt
bfeef77f1f
SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard
2015-11-05 11:25:39 -06:00
Gregory Nutt
a314b2ac11
ST25FL1: Fix error that was overwriting status
2015-11-05 10:38:47 -06:00
Gregory Nutt
3e2e5091cb
Merged in paulpatience/nuttx/ramlog (pull request #31 )
...
RAMLOG: Fix forgotten FARs
2015-11-05 09:45:03 -06:00
Gregory Nutt
a0149b6d33
Merged in paulpatience/nuttx/adc (pull request #30 )
...
ADC: Fix forgotten FARs
2015-11-05 09:44:22 -06:00
Paul A. Patience
b5a77b9403
RAMLOG: Fix forgotten FARs
2015-11-05 10:38:42 -05:00
Paul A. Patience
4c70fc181a
ADC: Fix forgotten FARs
2015-11-05 10:27:47 -05:00
Gregory Nutt
c6fc285277
CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages
2015-11-03 10:52:58 -06:00
Lok
da8950fe5b
Fix an error in clock_timespec_subtract
2015-11-03 07:28:46 -06:00
Gregory Nutt
6cfad17602
Update submodules
2015-11-01 17:45:48 -06:00
Gregory Nutt
51d29d3c97
Merged in paulpatience/nuttx/pwm (pull request #29 )
...
PWM: Add support for multiple output channels per timer
2015-11-01 16:40:06 -06:00
Paul A. Patience
e8c2466c1c
PWM: Add support for multiple output channels per timer
2015-11-01 17:15:12 -05:00
Gregory Nutt
7041ba8071
Add comments to Make.defs file
2015-11-01 15:07:58 -06:00
Gregory Nutt
fc91ded815
Add support for a general user LED lower-half driver
2015-11-01 14:57:22 -06:00
Gregory Nutt
0dea00177e
Add a generic user LED upper half discrete driver
2015-11-01 14:41:40 -06:00
Gregory Nutt
cbb78071b3
Rename ioexpander/ directories to discrete/
2015-11-01 13:14:48 -06:00
Gregory Nutt
0032b91f49
Update ChangeLog
2015-11-01 12:51:03 -06:00
Gregory Nutt
56ad07f02b
Add standard naming for board user LED functions
2015-11-01 12:48:13 -06:00
Gregory Nutt
2318038bbc
Rename board_led_off to board_autoled_off
2015-11-01 09:10:40 -06:00
Gregory Nutt
8093def2c8
Rename board_led_on to board_autoled_on
2015-11-01 09:07:46 -06:00
Gregory Nutt
148d5fcffd
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:04:02 -06:00
Frank Benkert
e772c56ef6
AT24xx EEPROM Driver: Correct typo from last changeset
2015-10-31 09:04:53 -06:00
Gregory Nutt
a7a405df00
Update ChangeLog
2015-10-23 07:16:42 +08:00
Gregory Nutt
aa92d44caf
Update ChangeLog
2015-10-23 07:13:48 +08:00
Gregory Nutt
68c4dedb78
Named semaphores: Bad cast in sem_close(). Fixed by reordering fields of struct nsem_inode_s so that the cast will work
2015-10-23 07:13:47 +08:00
Gregory Nutt
46b688e701
Merged in marten_svanfeldt/nuttx-public/for_upstream/at24cxx (pull request #28 )
...
Improvements of AT24xx MTD driver
2015-10-22 18:15:39 +08:00
Marten Svanfeldt
a31d1fd378
Make I2C frequency configurable for the AT24Cxx EEPROM driver
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 12:01:36 +08:00
Marten Svanfeldt
af9590eef7
Extend the AT24Cxx MTD driver with support for -04,-08 and -16 parts.
...
These parts utilize the same one-byte-address in the I2C protocol as the -02,
but requires different I2C addresses for different banks of the EEPROM.
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 12:01:36 +08:00
Gregory Nutt
00af71dd78
Update ChangeLog
2015-10-20 06:02:10 +08:00
Gregory Nutt
081fa3e0ec
Update submodules
2015-10-18 08:15:39 +08:00
Gregory Nutt
d8731d0ef1
Add files missed in previous commit
2015-10-18 08:00:06 +08:00
Alan Carvalho de Assis
0ba6f21532
Add support to Thermocouple-to-Digital converter MAX6675
2015-10-18 07:52:47 +08:00
Gregory Nutt
bf99b4e207
Update submodules
2015-10-14 07:15:00 -06:00
Gregory Nutt
a5f44cd9fc
Buttons lower half: Undefine __KERNEL__ before including board.h to suppress bad included; fix some configuratin issues
2015-10-13 09:29:23 -06:00
Gregory Nutt
f5f69ef85d
Add a file missed in the last commit
2015-10-13 07:36:46 -06:00
