Gregory Nutt
301bf1ee77
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
...
Squashed commit of the following:
configs: Each board now initializes the touchscreen controller as a normal part of its board bring-up. board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
Remove all support for BOARDIOC_TSCTEST_SETUP
Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
168809764f
configs: All NX configuration... Because of recent changes to libnx/nxfonts, Supported bit per pixel must be separated specified for NXFONTs too and need to match the select BPP for NX.
2017-11-24 06:33:54 -06:00
Gregory Nutt
b75952c479
This removes the last traces of single-user mode.
2017-10-15 09:34:08 -06:00
Gregory Nutt
e986b72a4f
Remove more duplicate Make.defs files
2017-07-11 08:33:41 -06:00
Gregory Nutt
422888733b
More conversions of defconfig files to compressed format. Not yet finished.
2017-07-09 19:25:19 -06:00
Gregory Nutt
cd54a0340f
Fix a typo. And typo in Kconfig file is reflect in all defconfig files.
2017-06-15 14:29:09 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Gregory Nutt
1620ff05f4
Remove all setenv.sh files.
2017-04-26 07:49:37 -06:00
Gregory Nutt
c071e2a30c
Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads.
2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305
Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES
2017-03-27 09:08:14 -06:00
Gregory Nutt
c428661e18
apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.
2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5
Refresh all ARM configurations
2017-03-09 10:23:41 -06:00
Gregory Nutt
4539988d00
Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero().
2017-02-22 10:41:49 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
8ab77c55cd
SAMv71-XULT: Fixes to knsh configuration. Still does not work properly.
2017-01-30 12:49:07 -06:00
Gregory Nutt
eeeb0ad112
Refresh all SAM v7 configurations
2017-01-30 11:24:32 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Gregory Nutt
4216c4b777
NxWM configurations. If using a 7-bit character set, then the cursor character cannot be 137 (graphic block). Use 95 (underscore) instead.
2017-01-08 09:21:37 -06:00
Gregory Nutt
7035d232f8
NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue.
2017-01-08 09:14:11 -06:00
Gregory Nutt
e1d9bb2ef2
Refresh all NX multi-user configurations
2017-01-08 08:06:18 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gregory Nutt
55dd1c87b3
Remove all references to BOARDIOC_ADCSETUP
2016-12-05 15:31:40 -06:00
Gregory Nutt
b999e63c82
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
2016-12-05 13:54:12 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Gregory Nutt
86b5f3b9ed
boardctl: Add new command to start the NX server as a kernel thread. Also refresh more configurations.
2016-12-01 15:05:57 -06:00
Gregory Nutt
6dda185e8a
NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode.
2016-12-01 13:30:24 -06:00
Beat Küng
c7da88e383
CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used
...
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
2016-08-22 08:35:01 +02:00
Gregory Nutt
b071e4ce92
Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes
2016-08-08 12:50:14 -06:00
Gregory Nutt
f43ded46e6
Rename arch/sh to arch/renesas, cont'd
2016-08-06 14:03:38 -06:00
Gregory Nutt
32c6cd71bb
Refresh all SAMV71/SAME70 configurations
2016-06-28 15:40:10 -06:00
Gregory Nutt
2a19e16eb0
libc/hex2bin: Move the portable library portion of apps/system/hex2bin to nuttx/libc/hex2bin where it can be shared with the OS internals.
2016-06-27 11:22:38 -06:00
Gregory Nutt
1377452394
Refresh all ARM configurations
2016-06-23 15:59:14 -06:00
Gregory Nutt
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
Gregory Nutt
5b2aa7bf99
Remove all traces of CONFIG_SYSLOG
2016-06-19 13:59:43 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
f2c65a4c47
Refresh configurations
2016-06-05 12:14:34 -06:00
Gregory Nutt
2b47473778
Remove all references to CONFIG_SYSTEM_FLASH_ERASEALL
2016-06-02 10:19:02 -06:00
Gregory Nutt
9ec104834a
Remove CONFIG_USARTn_ISUART
2016-05-25 11:21:48 -06:00
Gregory Nutt
c089a2f241
Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER
2016-05-25 10:48:33 -06:00
Gregory Nutt
e2e6ce3f1b
Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER
2016-05-25 10:46:55 -06:00
Gregory Nutt
2a87741e72
Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER
2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5
Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER
2016-05-25 10:39:23 -06:00
Gregory Nutt
3b245d6092
SAMV7-XULT: Refresh configurations
2016-04-14 08:00:43 -06:00
Gregory Nutt
3228d32938
Correct permmisions on executable scripts
2016-04-10 09:11:59 -06:00
Gregory Nutt
7337e748de
Merge in configs/ submodule
2016-04-10 07:57:59 -06:00
Gregory Nutt
ad61b7ab3e
Remove all references to CONFIG_SYSTEM_SDCARD
2016-03-30 17:53:19 -06:00
