Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
Correct typos in include/nuttx/arch.h and suppress
"'noreturn' function does return" warning coming from arm_pthread_exit.c
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is currently only used on STM32L4+ devices. Page erase in
flash_erase() function supports only dual-bank mode so it makes little
sense to configure this for unsupported single-bank mode.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
CAN_ESR2 register was having problems of havng the correct values when
the bus was busy (with 3 and more nods). The register bit fields were
incorrectly indicating that there is no free MB and would not updated
itself from this state which was causing the applications to freeze on
write. This change relies only on a software control which should avoid
the problems described above.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This feature depends on frame pointer, "-fno-omit-frame-pointer" is mandatory
This feature can not be used in THUMB2 mode if you are using GCC toolchain,
More details please refer:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92172
Signed-off-by: chao.an <anchao@xiaomi.com>
Ken Pettit is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
In AArch32, the frame pointer is stored in register R11 for ARM code or register R7 for Thumb code.
In AArch64, the frame pointer is stored in register X29.
Signed-off-by: chao.an <anchao@xiaomi.com>
Previous implementation has always expanded the width of the timer to 32-bit.
This feature is not always needed and should be configurable from Kconfig.
