Michael Jung
|
fc47c4ecea
|
configs/pnev5180b/knsh: Add PROTECTED mode configuration with NuttShell.
|
2019-07-09 07:30:06 -06:00 |
|
Michael Jung
|
61f3881132
|
configs/pnev5180b/usbnsh-cdcecm: This new configuration includes a USB Composite Device with both CDC/ACM and CDC/ECM. NuttShell provides a terminal via CDC/ACM. A network interface (eth0) is provided via CDC/ECM.
|
2019-06-29 11:30:47 -06:00 |
|
Michael Jung
|
157bf153fc
|
configs/pnev5180b/nsh-cdcecm: Adds NSH configuration with UART0 and eth0 via CDC/ECM on USB device.
|
2019-06-28 06:59:36 -06:00 |
|
Michael Jung
|
393f5b96dd
|
configs/pnev5180b: Add usbnsh configuration. This is basically the same as the 'nsh' defconfig, but uses CDC/ACM as the NuttShell console device.
|
2019-06-22 07:32:52 -06:00 |
|
Michael Jung
|
ace7ead09f
|
configs/pnev5180b: Minimal support for NXP Semiconductors' PN5180 NFC Frontend Development Kit. This board is based on the NXP LPC1769 MCU. At the moment there is just support for a minimal nsh configuration via UART0.
|
2019-06-17 15:57:42 -06:00 |
|