Gregory Nutt
|
32a4131f92
|
Fix a cut'n'paste error in the last commit
|
2015-05-10 10:23:23 -06:00 |
|
Gregory Nutt
|
9e07b2deb1
|
OHCI: Fix length calculation in all OHCI drivers: CBP==0 means that the entire buffer was transferred, not that a null packet was tranaferred
|
2015-05-10 10:01:22 -06:00 |
|
Gregory Nutt
|
6e5a4e8b5e
|
Add EXTI line definitions for the STM32L family.
|
2015-05-09 09:03:14 -06:00 |
|
Gregory Nutt
|
4250bb5138
|
STM32 F3: Add DBGMCU register definitions for the F3 family. From Greg Meiste.
|
2015-05-09 06:05:17 -06:00 |
|
Gregory Nutt
|
aaaa8f2e9d
|
Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane.
|
2015-05-08 14:10:55 -06:00 |
|
Gregory Nutt
|
780c81f130
|
USB host CDC/ACM fixes. Still kind of buggy
|
2015-05-08 10:58:41 -06:00 |
|
Gregory Nutt
|
b8483aea40
|
In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane
|
2015-05-07 20:36:08 -06:00 |
|
Gregory Nutt
|
2325f2c529
|
kl: enable the clocks to UART1 and UART2. The previous version would cause a hard fault on startup due to the modules not being clocked. Also drop the GPIO configuration as it's done during kl_start(). From Michael Hope.
|
2015-05-07 17:17:54 -06:00 |
|
Gregory Nutt
|
292cb9fe2f
|
kl: fix PWM debugging. TPM1 and TPM2 have two channels instead of six and will hard fault if you try to read the missing channels. From Michael Hope.
|
2015-05-07 17:17:53 -06:00 |
|
Gregory Nutt
|
d1da52a018
|
Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work.
|
2015-05-07 10:02:51 -06:00 |
|
Gregory Nutt
|
8062555384
|
Add support for the KL25Z64. The KL25Z64 is a lower memory variant of the KL25Z128 and is used on the Teensy LC. From Michael as SourceForge patch 50.
|
2015-05-07 06:47:17 -06:00 |
|
Gregory Nutt
|
afafe84050
|
LPC17 USB host: Fix some compile errors when bulk endpoints + USB debug enabled. Refresh a configuration
|
2015-05-06 16:15:12 -06:00 |
|
Gregory Nutt
|
5f113517f6
|
Fix a few typos in comments
|
2015-05-06 15:26:07 -06:00 |
|
Gregory Nutt
|
a813d9438c
|
SAMA5 OHCI: Remove a DEBUGASSERT that was firing if a a spurious interrupt was received
|
2015-05-06 07:44:37 -06:00 |
|
Gregory Nutt
|
14837ed20e
|
Fix some bugs introduced with the last set of big commits
|
2015-05-05 14:59:29 -06:00 |
|
Gregory Nutt
|
8f959373e1
|
USB host: Modify the transfer() and asynch() methods so that the actual size of the transfer is returned. Unverified on initial commit.
|
2015-05-05 13:14:22 -06:00 |
|
Gregory Nutt
|
93b251b372
|
Cosmetic changes
|
2015-05-05 06:42:58 -06:00 |
|
Gregory Nutt
|
12bf2aa3be
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
|
Gregory Nutt
|
5381479cbb
|
SAMA5D OHCI: Remove a local variable that is unused when debug is disabled; refresh a configuration. Update a README
|
2015-05-04 07:34:29 -06:00 |
|
Gregory Nutt
|
eac8bcf910
|
Olimex LPC1766STK: The USB host waiter stack should be configurable because it needs to be a lot depending when using a hub
|
2015-05-03 16:14:08 -06:00 |
|
Gregory Nutt
|
ef2ef35600
|
EHCI: Fix backward arguments to memalign in previous alignment fix; extend fix to OHCI too
|
2015-05-03 14:31:16 -06:00 |
|
Gregory Nutt
|
ca8fd8c964
|
LPC31 and SAMA5Dx EHCI drivers: Fix cache related problem. All buffers are now aligned with the cache line size in both starting address and in length. This cause major problems in unlucky builds where the USB host buffers where unaligned and abbutting other data. The cache flush and invalidate operations could be subverted by acceses to adjacent data or could have unexpected side effects. This bug has been in the ECHI drivers forever, but was only revealed due to unlucky memory allocations during the integration of the hub feature.
|
2015-05-03 13:20:15 -06:00 |
|
Gregory Nutt
|
1828d14c08
|
Fix trivial typo
|
2015-05-03 10:48:42 -06:00 |
|
Gregory Nutt
|
5577b55cf5
|
SAMA5 EHCI: Mostly cosmetic
|
2015-05-03 08:51:44 -06:00 |
|
Gregory Nutt
|
00fd848209
|
SAMA5 EHCI: Fix some compile issues when hub support is enabled
|
2015-05-02 14:00:12 -06:00 |
|
Gregory Nutt
|
d824979cec
|
Merge remote-tracking branch 'origin/master' into usbhub
|
2015-05-02 11:39:08 -06:00 |
|
Gregory Nutt
|
80d4c7c21a
|
USB host: If the implementation of the disconnect method frees the EP0 endpoint, then it must nullify it in the port structure
|
2015-05-02 11:38:27 -06:00 |
|
Gregory Nutt
|
b3d12c6026
|
STM32 USB device. Add protection in the event that out-of-bound enpoint numbers are received. From David Sidrane.
|
2015-05-02 10:58:27 -06:00 |
|
Gregory Nutt
|
823af4b409
|
USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port
|
2015-05-02 10:44:18 -06:00 |
|
Gregory Nutt
|
6481f1f68e
|
ARMv7-A: Port some assertion debug logic from ARMv7-M
|
2015-05-02 09:53:57 -06:00 |
|
Gregory Nutt
|
8ebb694516
|
SAMA5 OHCI: Implement asynchronous I/O needed for hub support
|
2015-05-02 09:38:08 -06:00 |
|
Gregory Nutt
|
862e52aa42
|
LPC17 GPIO: Reorder steps when an output GPIO is configured in order to avoid transient bad values from being output. From Hal Glenn.
|
2015-05-02 06:30:19 -06:00 |
|
Gregory Nutt
|
5a2ed0f6c1
|
Merge remote-tracking branch 'origin/master' into usbhub
|
2015-05-01 15:38:48 -06:00 |
|
Gregory Nutt
|
232a01b91c
|
SAMA5D USB hub: Fix some trace statements; update some README files
|
2015-05-01 15:38:03 -06:00 |
|
Gregory Nutt
|
e8f89f127b
|
SAM PIO: sam_pio.h needs to include chip/sam_memorymap.h in order to resolve some conditional logic properly
|
2015-05-01 13:41:28 -06:00 |
|
Gregory Nutt
|
48f368f96f
|
SAMA5 OHCI: Improve some trace-related naming
|
2015-05-01 13:40:54 -06:00 |
|
Gregory Nutt
|
4055b08ded
|
Add USB host trace output to show EP0 configuration
|
2015-05-01 13:02:20 -06:00 |
|
Gregory Nutt
|
b328c51037
|
SAMA5 OHCI: Clean up some debug output
|
2015-05-01 10:50:01 -06:00 |
|
Gregory Nutt
|
ce9c91c562
|
SAMA5D OHCI: Add some missing logic required for USB hub support
|
2015-05-01 10:13:23 -06:00 |
|
Gregory Nutt
|
e76b7d99fa
|
Added missing EXTI definitions for the STM32 F3; Correct an error the port D base address in the STM32 F3 and F37 memory maps. From Greg Meiste.
|
2015-05-01 07:31:56 -06:00 |
|
Gregory Nutt
|
149d8c039d
|
EFM32 USB host: Add missing trace data and some missing connection-related logic; update a configuration
|
2015-04-30 13:46:53 -06:00 |
|
Gregory Nutt
|
501d82928d
|
STM32/EFM32 USB host: Implemented asynchronous cancel method
|
2015-04-30 11:24:18 -06:00 |
|
Gregory Nutt
|
c096b7d426
|
USB Hub: Fix compile problems when hub debug enabled
|
2015-04-30 08:12:55 -06:00 |
|
Gregory Nutt
|
a4455d07c1
|
STM32 HUB: Fix more compilation errors when hub support is enabled
|
2015-04-30 08:00:41 -06:00 |
|
Gregory Nutt
|
2f7682f7df
|
Fix some errors in initial re-verification of USB host on the STM32F4-Discovery
|
2015-04-30 07:28:30 -06:00 |
|
Gregory Nutt
|
d4feb7205f
|
First cut, dirty conversion of EFM32, STM32 FS and HS host drivers to the new interfaces
|
2015-04-29 15:53:58 -06:00 |
|
Gregory Nutt
|
6d66546c31
|
USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue.
|
2015-04-29 08:32:17 -06:00 |
|
Gregory Nutt
|
60243e508e
|
Merge remote-tracking branch 'origin/master' into usbhub
|
2015-04-28 12:22:20 -06:00 |
|
Gregory Nutt
|
c641b8fed4
|
USB ECHI: Fix a bug when trying to traverse an empty asynchronous queue
|
2015-04-28 11:29:16 -06:00 |
|
Gregory Nutt
|
169dcd6706
|
EHCI HUB: Fix some issues related to speed and device addresses
|
2015-04-28 09:43:06 -06:00 |
|