Summary:
- During Wi-Fi stress test, sometimes ASSERT() happens in gs2200m.c
- This commit removes the ASSERT() but calls _remove_all_pkt()
for a workaround.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- When sending an AT command during receiving a bulk packet,
the bulk packet might be put in the AT command response.
- To handle such the case, gs2200m_send_cmd2() is newly
introduced instead of using gs2200m_send_cmd(dev, cmd, NULL)
Impact:
- All use cases that send an AT command in gs2200m.c
Testing:
- Tested with renew and nxplayer with spresense:wifi
Reported-by: Masatoshi Ueno <Masatoshi.Ueno@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- When receiving a UDP packet partially, the rest of the packet
must be discarded.
Impact:
- None
Testing:
- Tested with a UDP sample program
Reported-by: Masatoshi Ueno <Masatoshi.Ueno@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This change makes it so that the timeout is set as part of the SDIO_WAITENABLE call instead of the SDIO_EVENTWAIT call. By doing so, you eliminate all opportunity for a race condition.
stm32h7:sdmmc Check if busy ended early
Ales Verbic has submitted the ICLA and we can migrate the licenses
to Apache.
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Laurent Latil has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Bob Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Sebastien Lorquet has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During Wi-Fi stress test, I noticed that ASSERT() happened
in gs2200m_hal_write(). Actually, this happens in 20-40 hours.
- In this case, resp[1] was always 0x0 which is not defined
in the spec.
- In the previous implementation, retry was only done in case of
WR_RESP_NOK. (0x13)
- This commit changes this condition and it reties in case of
0x0 as well
Impact:
- gs2200m driver
Testing:
- Tested with spresense:wifi_smp and stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During reviewing the GS2200M document, I noticed that
_read_data() implementation is incorrect.
- Actually, we do not use "SPI Byte Stuffing for SPI-NO-DMA"
but use "SPI Command Response (SPI-DMA)", so the sequence
should use SPI_RECVBLOCK().
Impact:
- gs2200m.c only
Testing:
- Tested with stm32f4discovery:wifi and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that some error messages are printed with wlinfo()
- This commit prints such error messages with wlerr()
Impact:
- No impact
Testing:
- Tested with spresense:wifi
- NOTE: CONFIG_DEBUG_WIRELESS_ERROR must be enabled
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During stress test with spresense:wifi (non-SMP), I noticed
sometimes ASSERT() happened in _read_data_len()
- Actually, up_udelay(50) has been added to avoid the ASSERT
- However, I finally noticed that it should be moved before
calling dready()
- Also, I cofirmed that we can reduced the time from 50 to 30
- NOTE: we need at least 15us in my experience
Impact:
- gs2200m.c only
Testing:
- Tested with following configurations
- spresense:wifi, spresense:wifi_smp, stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
