Provide a way to only customize specific string operations,
such as for memcpy with the DMA capability by ROM.
Signed-off-by: yangdongdong <yangdongdong@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
* build-globals.sh
- Macros for defining symbols etc. based on assembler in use
- Use the System.map to get all the nuttx symbols
* libs/libc/modlib/modlib_globals.S
- Provide an empty skeleton. If the dynamic loading functions
are required then run build-global.sh after a clean build
using the skeleton. This will fill out the skeleton with the
symbols to be available to dynamically loaded modules.
* libs/libc/modlib/modlib_loadhdrs.c
- Fix case where there are no program headers are avaiable
* libs/libc/machine/arm/armv7-m/arch_elf.c
- Fix cast of error message parameters
* build-globals.sh
- Build the modlib_globals.S file used to resolve symbols when dynamically loading
* libs/libc/modlib/Make.defs
- Build modlib_globals.S for all targets
* libs/libc/modlib/modlib_load.c
- Calculate sizes and text/data addresses based on program headers rather than section headers
- Handle objects with no program headers
* libs/libc/modlib/modlib_bind.c
- Call modlib_readsym with pointer to symbol table
- Add modlib_relocatedyn to manage relocation of symbols with shared object (ET_DYN)
- Differentiate between ET_REL and ET_DYN objects
- Use arch independent symbol ELF_R_SYM
- Cast sizes to avoid warnings
* libs/libc/modlib/modlib_load.c
- Cast sizes to avoid warnings
* include/elf.h
- Add definitions that may be found in shared objects
* include/nuttx/lib/modlib.h
- Add parameter to modlib_readsym prototype
- Add prototypes for:
- modlib_insertsymtab
- modlib_findglobal
- Define Elf_Dyn and Elf_Off according to the elf architecture
- Add fields to mod_loadifno_s:
- Program headers
- Exported symbols
- Data section address
- Padding requirement
- Section index for dynamic symbol table
- Number of symbols exported
- Add prottotype for modlib_freesymtab
* libs/libc/dlfcn/lib_dlclose.c
- Free the symbol table when the dll is closed
* libs/libc/dlfcn/lib_dlopen.c
- Add dump of program headers to debug routine
- Differentiate between ET_REL and ET_DYN objects
* libs/libc/machine/arm/armv7-m/arch_elf.c
- Add handling of R_ARM_RELATIVE and R_ARM_JUMP slot relocation types
* libs/libc/modlib/modlib_loadshdrs.c
- Rename modlib_loadshdrs.c to modlib_loadhdrs.c
- Rename modlib_loadshdrs to modlib_loadhdrs
- Add code to load program headers
* libs/libc/modlib/modlib_symbols.c
- Define entry point structure
- Add offset parameter to modlib_symname() and use to find symbol names
- Add symtab section header parameter to modlib_readsym()
- Add offset parameter to modlib_symvalue() to locate symbol names
- Add modlib_insertsyntab() to create a symbol table for exporting and resolution
- Add findEP() to resolve a symbol in the modlib_global table
- Add modlib_findglobal() to find symbol in the modlib_global table
- Add modlib_freesymtab() to free the symbol table
* libs/libc/modlib/modlib_uninit.c
- Free header and sections from a module_loadinfo_s control block
* libs/libc/modlib/modlib_verify.c
- Handle ET_DYN shared objects
* libs/libc/modlib/modlib_globals.S
- Multi-target global table
- Define library APIs that may be resolved when loading a shared object
since symbols defined in arch/elf.h is also used in other case, for example:
CC: pthread/pthread_testcancel.c machine/arm/gnu_unwind_find_exidx.c:32:8: error: unknown type name '__EIT_entry'
32 | static __EIT_entry *__exidx_start_elf;
| ^~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Add the `LIBC_PREVENT_STRING_KERNEL` and `LIBC_PREVENT_STRING_USER`
that are meant to be selected by the chip if no libc implementation
is going to be built. If selected, neither NuttX's software version
of the libc nor any architecture-specific implementation will be
built in the kernel or in the userspace, respectively. In this
case, the linker may provide a ROM-defined version of the libc
functions instead.
For CONFIG_BUILD_KERNEL using the sched/task/task_exithook implementation
will just not work. It calls user code with kernel privileges which is
a bit of a security issue.
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds thumb support to arch_elf.c
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
