Gregory Nutt
e4922ed9f0
Remove instructures to CD to tools/ before running ./configure.sh
...
Squashed commit of the following:
configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
configs/*/README.txt: Remove 'cd ..' after each './configure.sh'
configs/*/README.txt: Remove 'cd -' after each './configure.sh'
configs/*/README.txt: Remove 'cd tools' before each './configure.sh'
configs/README.txt: Remove instruction to CD tools/ before running configure.sh.
2018-05-09 11:41:46 -06:00
Gregory Nutt
43a221f308
configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files.
2017-11-26 11:36:03 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
63b1eb09e6
Centralize definitions associated with CONFIG_DEBUG_CAN
2016-06-15 15:45:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
3e0efd7279
Fix all URLs to the NuttX repository
2016-04-06 17:56:40 -06:00
Gregory Nutt
e46cd30c14
Change use of mknulldeps.sh to mkwindeps.sh
2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
46bd0bc307
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
bb5f545173
STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent
2014-05-07 12:54:27 -06:00
Gregory Nutt
51950d7850
Undefine IRQPRIO in all configurations it should not be set
2014-04-16 08:29:39 -06:00
Gregory Nutt
ab5b37189b
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
Gregory Nutt
0cefef9cb5
Documentatin updated; fix errors in some comments
2014-03-28 09:52:07 -06:00
Gregory Nutt
5317d78c41
Use common naming for rest of the toolchains too
2014-03-05 16:29:58 -06:00
Gregory Nutt
d7d856e504
Use common naming for all buildroot toolchains
2014-03-05 15:37:07 -06:00
Gregory Nutt
4f067ce765
configs/stm3210e-eval/pm: Configuration converted to use the kconfig-frontends tools
2014-03-04 09:55:52 -06:00
Gregory Nutt
efded598fd
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
2013-07-26 10:09:17 -06:00
patacongo
26ee7e0449
Correct a memory leak in NSH
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5600 42af7a65-404d-4744-a932-0658087f49c3
2013-02-02 23:56:54 +00:00
patacongo
6de0a97d9b
Use kconfig- prefix to avoid tool name conflicts (from Jose Pablo Carballo)
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5496 42af7a65-404d-4744-a932-0658087f49c3
2013-01-09 12:55:13 +00:00
patacongo
2400d95042
Mostly cosmetic changes
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5344 42af7a65-404d-4744-a932-0658087f49c3
2012-11-13 15:50:38 +00:00
patacongo
aa827a048f
Add tools/mkdeps.bat and tools/mkdeps.c
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5342 42af7a65-404d-4744-a932-0658087f49c3
2012-11-13 00:38:59 +00:00
patacongo
61566c9d44
Document problem with GCC 4.8.3 and the NXFLAT tools
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5228 42af7a65-404d-4744-a932-0658087f49c3
2012-10-10 19:58:57 +00:00
patacongo
f92d824392
Rename gnu-nxflat.ld to gnu-nxflat-gotoff.ld; Add gnu-nxflat-pcrel.ld
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5225 42af7a65-404d-4744-a932-0658087f49c3
2012-10-10 17:01:23 +00:00
patacongo
bd8716842c
Update all config README.txt files to show that they use the EABI buildroot toolchain
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5218 42af7a65-404d-4744-a932-0658087f49c3
2012-10-06 17:29:36 +00:00
patacongo
0829cfcb45
Add support for Fire STM32v3; sscanf fixes from Kate
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5168 42af7a65-404d-4744-a932-0658087f49c3
2012-09-21 17:32:30 +00:00
patacongo
bf7b20456f
Upate some pathes for the new NuttX repository
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5156 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 19:33:42 +00:00
patacongo
dbad3e978a
Resync new repository with old repo r5166
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
2012-09-17 18:35:37 +00:00
patacongo
31f3a45ddb
Email address change in apps/
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5143 42af7a65-404d-4744-a932-0658087f49c3
2012-09-13 16:58:49 +00:00
patacongo
4aed6a9bd1
Misc STM32 wildfire and ENC28J60 driver updates
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5133 42af7a65-404d-4744-a932-0658087f49c3
2012-09-12 14:07:13 +00:00
patacongo
89d98d72cf
More M3 Wildfire logic; mmap-related bug fixes from Kate
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5124 42af7a65-404d-4744-a932-0658087f49c3
2012-09-10 20:00:04 +00:00
patacongo
941e056e99
More logic for the MX3 Wildfire board
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5123 42af7a65-404d-4744-a932-0658087f49c3
2012-09-10 16:48:45 +00:00
patacongo
6d900ffa25
More progress on the Wildfire STM32 port
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5121 42af7a65-404d-4744-a932-0658087f49c3
2012-09-09 21:48:25 +00:00
patacongo
db93df1963
Beginning of configuration for M3 Wildfire board
...
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5120 42af7a65-404d-4744-a932-0658087f49c3
2012-09-09 19:13:30 +00:00