sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,427 Commits 1 Branch 0 Tags 291 MiB
35697ed234
Commit Graph

35 Commits

Author SHA1 Message Date
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh 
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
 2018-05-09 11:41:46 -06:00
Gregory Nutt
0f2b8b0ca2 arch/arm/src/kinetis: Add SIM register definitions for the K28F. 2018-05-03 12:31:54 -06:00
Gregory Nutt
cafb527262 configs/flipnclick-sam3x: Using JTAG (vs. Bossac) I was finally able to load code and verify the basic NSH configuration. Updated READMEs. Also switched to USART0 (vs UART0) for the serial console because I was not getting bi-directional communication on the VCOM. 2018-01-24 08:52:40 -06:00
Gregory Nutt
c867d42018 arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC. 2017-12-20 10:52:05 -06:00
Gregory Nutt
cccc86da09 This change adds support for semi-standard IPPROTO_ICMP AF_INET datagram sockets. This replaces the old ad hoc, nonstandard way of implementing ping with a more standard, socket interface. 
Squashed commit of the following:

    net/icmp:  Finishes off icmp_recvfrom().
    net/icmp:  Add readahead support for IPPROTO_ICMP sockets.
    net/icmp:  Add poll() support for IPPROTO_ICMP sockets.
    net/icmp:  Add a connection structure for IPPROTO_ICMP sockets.
    net/icmp:  Implements sendto for the IPPROTO_ICMP socket.
    net/icmp:  Move icmp_sendto() and icmp_recvfrom() to separate files.  They are likely to be complex (when they are implemented).
    net/icmp:  Hook IPPROTO_ICMP sockets into network.  Fix some naming collisions.  Still missing basic ICMP send/receive logic.
    configs: apps/system/ping current need poll() enabled.
    configs: All defconfig files that use to enable low-level support must now enabled CONFIG_SYSTEM_PING.
    net/icmp:  Adds basic build framework to support IPPROTO_ICMP sockets.
 2017-10-23 08:45:12 -06:00
Gregory Nutt
44545781e5 configs/: Remove dangline space at the end of lines in .txt files. 2017-06-28 13:18:41 -06:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
David Sidrane
1cdac1e8e6 Fixed typos in k64f README.txt 2017-02-13 13:24:47 -10:00
Gregory Nutt
de1b68dc4e libc/Kconfig: Break big Kconfig up into separate Kconfig files in each libc subdirectory. 2017-02-10 09:32:55 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
44e747ebf1 Remove all references to CONFIG_NET_MULTIBUFFER from configs/ 2016-11-29 15:07:30 -06:00
neilh10
64b020f1a8 Add UID Unique ID 2016-10-13 19:42:39 -07:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
e88eb85ded Update README 2016-07-20 17:02:19 -06:00
Gregory Nutt
8082404381 Update a README 2016-07-20 14:19:09 -06:00
Gregory Nutt
e7f31cc967 Freedom-K64F: Enable built-in applications in all configurations 2016-07-15 14:58:20 -06:00
Gregory Nutt
e42e3bd58c Update README 2016-07-14 10:10:37 -06:00
Gregory Nutt
37e10a54ae Kinetis: Eliminate a warning. Freedom-K64F: Update a README file 2016-07-13 15:38:47 -06:00
Gregory Nutt
02eda2fdec Freedom K64F: SDHC-related changes from bring-up testing. 2016-07-13 14:26:18 -06:00
Gregory Nutt
b38c6da401 Update a README 2016-07-13 10:11:41 -06:00
Gregory Nutt
a7d8279714 Kinetis and Freedom-K64F: Remove unused configuration variable; fix some compile issues; SDHC is now enabled in the nsh configuration (but does not work) 2016-07-13 09:56:02 -06:00
Gregory Nutt
2f12de6f28 Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows 2016-07-13 09:23:57 -06:00
Gregory Nutt
9f72204bb6 Update README 2016-07-12 16:50:27 -06:00
Gregory Nutt
10667bd38a Kinetis Ethernet and Freedcom-K64F: PHY address was wrong. Modified driver to try all PHY addresses and then only fail if the driver cannot find a usable PHY address. MDIO pin must have an internal pull-up on the Freedom-K64F. 2016-07-12 14:09:27 -06:00
Gregory Nutt
de3b8d85a4 Freedom K64F: Add a networking NSH configuration. 2016-07-12 09:59:09 -06:00
Gregory Nutt
d37c5718aa Update README.txt 2016-07-11 16:04:07 -06:00
Gregory Nutt
c8d6707aaf Freedom-K64F: Increase MCU clock to 120MHz 2016-07-06 11:03:27 -06:00
Gregory Nutt
4bb6bb2cc1 Update README and some comments 2016-07-03 11:20:14 -06:00
Gregory Nutt
1bf745a841 Freedom K64F: Add pin configuration to use a serial Shield as the Serial Console. 2016-07-02 15:27:12 -06:00
Gregory Nutt
874c614117 Freedom K64F: Correct comments about VCOM serial console. Add pin multi-plexing disambiguaration for the VCOM UART pins. 2016-07-02 13:58:29 -06:00
Gregory Nutt
4ad7129ac9 Update README and some comments 2016-07-02 11:55:31 -06:00
Gregory Nutt
adbbca0bfc Freedom K64F: Correct button support 2016-07-02 08:18:42 -06:00
Gregory Nutt
326be154ad Freedom K64F: Update README.txt; add proper (auto) LED support 2016-07-02 07:56:43 -06:00
Gregory Nutt
7a7998e4f9 Add support for the NXP Freedom-K64F board. This is primarily the work of Jordan Macintyre. I leveraged this code from https://github.com/jmacintyre/nuttx-k64f 2016-07-01 15:42:21 -06:00