sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
45,798 Commits 1 Branch 0 Tags 291 MiB
3693d38763
Commit Graph

45798 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Xiang Xiao
4c2b7f3ac9 tools/jlink-nuttx: Move the register index check to setget_reg 
avoid access tcbinfo before initializing it in update_tcbinfo

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-25 16:53:40 +03:00
chao.an
252985fc1d netdev/carrier: check the IF stautus before carrier 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-25 19:52:53 +08:00
chao.an
43497df78b wireless/bcm43xxx: add dynamic kso control support 
1. PMU control by KeepSdioOn(KSO) if firmware support save restore
2. Remove watchdog timer

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-25 19:52:13 +08:00
chao.an
2eb1124db5 wireless/bcm43xxx: correct the return value 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-25 16:45:34 +08:00
zouboan
78535d0123 arch/stm32_capture: completion other slave mode selection 2022-06-25 14:35:17 +08:00
zouboan
20cd657a65 arch/stm32_capture: fix offset address of slave mode control register 2022-06-25 14:35:17 +08:00
Satoshi Togawa
667afb3b91 sama5: add config SAMA5_SYSTEMRESET in arch/arm/src/Kconfig 
SAMA5D2 and SAMA5D4 does not support external reset.
Some SAMA5 board's Kconfig contain item SAMA5_SYSTEMRESET, but it is better in arch/arm/src/Kconfig.
 2022-06-25 12:03:15 +08:00
qinwei1
b7cdacf3b5 .github/workflows: Add nuttx/source to the safe directory, covering apps 
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
 2022-06-25 11:56:13 +08:00
Alan Carvalho de Assis
429c474aff esp32-devkit: As suggest by Gustavo, remove mmcsdspi 
ESP32-Devkit doesn't have MMC/SD slot to put a card and it is basically
the same defconfig submitted to esp32-wrover-kit board that has that slot.
 2022-06-24 21:32:40 -03:00
Alan Carvalho de Assis
d8e95284cb esp32: Add mmcsdspi config 2022-06-24 21:32:40 -03:00
Alan Carvalho de Assis
87a2f35c2c esp32: Remove hard-coded SPI port for MMC/SD SPI 2022-06-24 21:32:40 -03:00
Gustavo Henrique Nihei
f2d1f25202 drivers/lcd: Fix regression on ILI9341 introduced after #6465 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-06-24 17:44:53 -03:00
Xiang Xiao
02690fe58e .github/workflows: Add nuttx/source to the safe directory 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-24 14:55:18 +03:00
Alan Carvalho de Assis
d4dc2f8ab2 tools: Fix warnings and replace deprecated readdir_r() 2022-06-24 11:42:41 +08:00
Xiang Xiao
379892d297 Allow ci update .github/workflows/docker_linux.yml 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-23 18:34:21 -03:00
Nathan Hartman
2032eeae6c Documentation: Fix various typos. 
Documentation/components/drivers/character/serial.rst
Documentation/faq/index.rst
Documentation/guides/pysimcoder.rst
Documentation/platforms/arm/imxrt/boards/teensy-4.x/index.rst
Documentation/platforms/arm/imxrt/index.rst
Documentation/platforms/arm/stm32wl5/boards/nucleo-wl55jc/index.rst
Documentation/platforms/arm/stm32wl5/index.rst
Documentation/platforms/risc-v/bl602/index.rst
Documentation/platforms/sim/sim/index.rst
Documentation/platforms/xtensa/esp32/index.rst

Co-authored-by: Gustavo Henrique Nihei <38959758+gustavonihei@users.noreply.github.com>
 2022-06-24 00:01:38 +08:00
chao.an
15864ff109 wireless/bcm43xxx: add get country code support 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-23 21:48:08 +08:00
chao.an
b476c68ac3 wireless: add SIOCGIWCOUNTRY (Get country code) 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-23 21:48:08 +08:00
Jukka Laitinen
ba1b8d0712 arch/risc-v/src/mpfs: Add mpfs_gpiosetevent and gpio irq handling functions 
Add a function to easily enable event handling on fabric and mss gpios. This
is similar to what exists e.g. for stm32 arm chips.

Also fix some small bugs in mpfs_configgpio related to IRQ bits configuration

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2022-06-23 21:45:15 +08:00
curuvar
412539e66c Added PWM support to rp2040 2022-06-23 10:17:40 -03:00
curuvar
75facdee72 Added PWM support for rp2040 2022-06-23 10:17:40 -03:00
Lingao Meng
77557d8d9f drivers: serial: Add error for insuff buffer 
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
 2022-06-23 16:50:45 +08:00
chao.an
442e75575e wireless/bcm43xxx: add set country code support 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-23 00:08:10 +08:00
Simon Filgis
cd1f90c25b Fix can buffer calculaiton. Add two words to every msg buffer 2022-06-23 00:07:42 +08:00
Eero Nurkkala
92760f89eb risc-v/mpfs: emmcsd: fix two issues 
This patch fixes the following issues:
  1. MPFS_EMMCSD_HRS06_EMM bitmask had to be 0x7, not 0x03
  2. putreg32() caused outright memory corruption as the
     arguments were in wrong order

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2022-06-22 09:50:33 +03:00
qinwei
881c896c06 tools: ci : add cibuild rule for arm64 
Summary:

1. add aarch64-none-elf toolchain for cibuild rule

Signed-off-by: qinwei <qinwei1@xiaomi.com>
 2022-06-22 12:14:59 +08:00
Alan Carvalho de Assis
19fd0a5587 stm32xx: Fix RTC drift when using HSE 
When using HSE to clock RTC NuttX internal time is gaining 5.5 second per
minute. Problem was NuttX using 7182 for one of the RTC division factors,
it should have been 7812. The incorrect factors used are 7182 and 0xff.

These are used in 3-4 places within Nuttx and other places as 7812 and 0xff.
However, the STMicro app note AN4759 suggests using 7999 and 124, which is
what I've used.

Explanation: These 2 factors are used to divide the HSE clock (which at this
point is 1 MHz) to 1 Hz for the RTC hardware.
To test the 2 factors, add 1 to both numbers and multiply them together.
The result needs to be as close as possible to 1 MHz.
The suggested values of 7999 and 124 => 8000*125 = 1,000,000, the prime
factors. So, the best fix for Nuttx would be these values.

Issue discovered and fixed by Peter Moody
 2022-06-21 17:58:10 +03:00
Huang Qi
9481456fde risc-v/esp32c3: Implement up_perf_xxx API 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-06-21 21:35:22 +08:00
Michael Jung
9140693567 Add lcd_dev_s pointer to lcd_planeinfo_s 
In order to support multiple LCD instances per board, add a pointer from
lcd_planeinfo_s to the lcd_dev_s which it belongs to.  Also enhance the
putrun, getrun, putarea and getarea methods to pass through the
lcd_dev_s pointer to the respective device driver.

Port all LCD device drivers to this lcd_planeinfo_s extension.

Enhance SSD1306 driver to support multiple LCDs.

Signed-off-by: Michael Jung <michael.jung@secore.ly>
 2022-06-21 21:33:23 +08:00
Richard Tucker
f68a5f0913 boards/risc-v/litex/arty_a7: add netnsh defconfig 2022-06-21 12:06:37 +03:00
Richard Tucker
88c58df6d6 net: fix DP83825I comments 2022-06-21 12:06:37 +03:00
Richard Tucker
eaa5f9ab4e net: add DP83848C constants 2022-06-21 12:06:37 +03:00
Richard Tucker
8f36649aad arch/risc-v/src/litex/litex_emac: add liteeth peripheral driver 
See the following for details on the pepheral:
https://github.com/enjoy-digital/liteeth
 2022-06-21 12:06:37 +03:00
chao.an
04fcbb5cb8 wireless/bcm43xxx: add auto power saving support 
switch firmware power mode between PM_MAX/PM_FAST

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-21 02:33:18 +08:00
AuroraRAS
0fe219a8c9 Add I2C_M_NOSTART and I2C_M_NOSTOP support in esp32c3_i2c 
Signed-off-by: AuroraRAS <chplee@gmail.com>
 2022-06-20 10:34:22 -03:00
Ville Juven
6cb77a8d84 mpfs: Allow mapping of RAM/ROM regions from different memory areas 
The old implementation needed a contiguous memory block for user
ROM/RAM. This is because there was only 1 L3 page table which can only
map a contiguous memory area.

Also, remove the PMP configuration which just complicates things,
rely on the MMU mappings instead.
 2022-06-20 21:24:18 +08:00
Ville Juven
ba4277bb13 syscall: Remove exit() call gate 
exit() is a userspace function, no need for call gate
 2022-06-20 14:14:28 +03:00
dependabot[bot]
42dbe218e6 build(deps): bump docker/build-push-action from 2 to 3 
Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 2 to 3.
- [Release notes](https://github.com/docker/build-push-action/releases)
- [Commits](https://github.com/docker/build-push-action/compare/v2...v3)

---
updated-dependencies:
- dependency-name: docker/build-push-action
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-20 13:51:56 +08:00
dependabot[bot]
b7d288c51a build(deps): bump actions/setup-python from 2 to 4 
Bumps [actions/setup-python](https://github.com/actions/setup-python) from 2 to 4.
- [Release notes](https://github.com/actions/setup-python/releases)
- [Commits](https://github.com/actions/setup-python/compare/v2...v4)

---
updated-dependencies:
- dependency-name: actions/setup-python
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-20 12:08:33 +08:00
dependabot[bot]
46e38a2f06 build(deps): bump actions/cache from 2 to 3 
Bumps [actions/cache](https://github.com/actions/cache) from 2 to 3.
- [Release notes](https://github.com/actions/cache/releases)
- [Changelog](https://github.com/actions/cache/blob/main/RELEASES.md)
- [Commits](https://github.com/actions/cache/compare/v2...v3)

---
updated-dependencies:
- dependency-name: actions/cache
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-20 12:08:18 +08:00
chao.an
2772efc862 wireless/bcm43xxx: remove small chunks to improve clm download speed 
Chunk length is fine as long as it does not exceed 1400

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-19 23:12:10 +08:00
chao.an
2e3ed3ae67 wireless/bcm43xxx: prefer HPWORK if bcmf task has higher priority than HPWORK 
Use high priority queue if the bcmf daemon task has a higher priority
than HPWORK, which will bring better performance especially on devices
that focus on real-time of network.

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-19 23:11:52 +08:00
chao.an
47ebec34e3 wireless/bcm43xxx: merge frame send to once to improve the performance 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-19 20:59:50 +08:00
chao.an
fa6ea23101 wireless/bcm43xxx: enable power saving on netdev up/down 
Move sdio/firmware de/initialize to ifup/down

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-19 19:08:00 +08:00
dependabot[bot]
2827b2beb3 build(deps): bump actions/checkout from 2 to 3 
Bumps [actions/checkout](https://github.com/actions/checkout) from 2 to 3.
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](https://github.com/actions/checkout/compare/v2...v3)

---
updated-dependencies:
- dependency-name: actions/checkout
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-19 13:37:40 +08:00
dependabot[bot]
8d17f26907 build(deps): bump actions/upload-artifact from 1 to 3 
Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 1 to 3.
- [Release notes](https://github.com/actions/upload-artifact/releases)
- [Commits](https://github.com/actions/upload-artifact/compare/v1...v3)

---
updated-dependencies:
- dependency-name: actions/upload-artifact
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-19 13:37:29 +08:00
dependabot[bot]
f0273efc63 build(deps): bump docker/login-action from 1 to 2 
Bumps [docker/login-action](https://github.com/docker/login-action) from 1 to 2.
- [Release notes](https://github.com/docker/login-action/releases)
- [Commits](https://github.com/docker/login-action/compare/v1...v2)

---
updated-dependencies:
- dependency-name: docker/login-action
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-19 13:37:19 +08:00
dependabot[bot]
2de2b5ca07 build(deps): bump actions/download-artifact from 2 to 3 
Bumps [actions/download-artifact](https://github.com/actions/download-artifact) from 2 to 3.
- [Release notes](https://github.com/actions/download-artifact/releases)
- [Commits](https://github.com/actions/download-artifact/compare/v2...v3)

---
updated-dependencies:
- dependency-name: actions/download-artifact
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-19 13:37:11 +08:00
dependabot[bot]
3921b9c337 build(deps): bump docker/setup-buildx-action from 1 to 2 
Bumps [docker/setup-buildx-action](https://github.com/docker/setup-buildx-action) from 1 to 2.
- [Release notes](https://github.com/docker/setup-buildx-action/releases)
- [Commits](https://github.com/docker/setup-buildx-action/compare/v1...v2)

---
updated-dependencies:
- dependency-name: docker/setup-buildx-action
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
 2022-06-19 13:37:00 +08:00
chao.an
0ec74ec6dd wireless/bcm43xxx: remove global variable for bcmf_sdio_thread 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-06-19 11:43:25 +08:00