lpc43/54 SDMMC: Wading through bits trying to make sense out of what is a event want interrupt which deal mostly with commands+responses and what is a data transfer event. DTO is the only wildcard. I think this clear now but DMA transfers will fail with CRC error.
lpc43/54 SDMMC: DTO is a wait event, not a transfer event.
lpc43/54 SDMMC: Significant simplication to previous design. More debug output.
lpc43/54 SDMMC: Don't allow duplicate events in waitmask and xfrmask.
lpc43/54 SDMMC: Not all interrupts were being disabled at the end of a transfer.
lpc43/54 SDMMC: Defer enabling DMA transfer interrupts until after command has been sent.
Squashed commit of the following:
arch/arm/src/lpc43xx: SDMMC driver now builds for the LPC43 (provided that the proper definitions appear in the board.h file).
arch/arm/src/lpc43xx: Update basic changes to the ported lpc54xx driver for lpc43xx clocking and GPIOs.
arch/arm/src/lpc43xx: Brings in the LPC54xx SD/MMC driver with absolutely no changes other than changing all occurences of 54 to 43.
arm/arm/src/lpc43xx: Add build support for the lpc54 SDMMC driver.
lpc54 SDMMC: Check for successful data transfer last. Checking first means that we miss errors.
Squashed commit of the following:
arch/arm/src/lpc54xx: SDMMC fixes.. DMA should not be enabled on non-DMA transfers, the burst setting in FIFOTH is supposed to match the burst setting in the BMOD reseters, Add DMA error interrupt support.
arch/arm/src/lpc54xx: Mostly costmetic changes to the SDMMC driver.
arch/arm/src/lpc54xx: Adds the LPC54-specific clock configuration logic to the leveraged SD/MMC driver.
arch/arm/src/lpc54xx: Leveraged SD/MMC driver builds without error but is still missing clock configuration logic.
arch/arm/src/lpc54xx: Bring in LPC43xx SD/MMC driver from https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
arch/arm/src/lpc54xx: LCD.. Fix some miconceptions about how the video address lines are used.
arch/arm/src/lpc54xx: Fix some LCD BPP and BRG vs RGB settings.
Squashed commit of the following:
arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support.
arch/arm/src/lpc54xx: Add lpc54_clrpend.c
arch/arm/src/lpc54xx: Serial driver is complete and compiles.
arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic)
arch/arm/src/lpc54xx: Fleshes out low level USART intialization.
arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
arch/arm/src/lpc54xx: Beginning of USART console support.
arch/arm/src/lpc54xx: Completes very basic clock configuration.
arch/arm/src/lpc54xx: Add clocking logic (still not complete)
arch/arm/src/lpc54xx: Beginning of PLL configuration logic.
arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic.
arch/arm/src/lpc54xx: Addes some SysTick logic.
arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration.
arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file.
arch/arm/src/lpc54xx: Add FLEXCOMM header file.
arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
arch/arm/src/lpc54xx: Add (incomplete) USART header file.
Add another condition to a Kconfig; refresh a defconfig.
arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628
arch/: Basic build directory structure for the LPC54628
