sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,066 Commits 1 Branch 0 Tags 291 MiB
37960ff780
Commit Graph

4 Commits

Author SHA1 Message Date
Gregory Nutt
39d1a02c6d This commit adds support for the S32K146EVB 
Squashed commit of the following:

    s32k1xx/s32k146evb/scripts/flash.ld:  Update the linker script for the S32K146.
    boards/:  Hook the S32K146EVB into the configuration and build system.
    s32k146_clockconfig.c:  Add S32K146 clock configuration.
    boards/arm/s32k1xx/s32k146evb/src/s32k146_periphclocks.c:  Update peripheral clocking for the S32K146.
    arm/s32k1xx/s32k146evb:  Initial support fo S32K146EVB.  Starting point is just the S32K118EVB with name changes.
 2019-08-19 09:14:14 -06:00
Gregory Nutt
db0641556e boards/arm/s32k1xx/s32k118evb: Implement board support for LEDs and buttons. This is taken from the Freedom-K66f with has the same LED and button configuation as the S32K116EVB and uses the same GPIO IP. 
boards/arm/s32k1xx/s32k118evb/include/board.h:  Add LPUART0 pin disambiguation.

arch/arm/src/s32k1xx/hardware:  Add pin mux definitions for S32K116, 118, 142, 144, 146, and 148.

arch/arm/src/s32k1xx/s32k1xx_pin.c and .h:  Add support for PIDR register that disables a gneral purpose pin from acting as an input.

arch/arm/src/s32k1xx/s32k1xx_pin.c and .h:  The device does not support slew rate controls or open drain (on all the pins).  Only pins that are configured for a protocol that requires open-drain (e.g;, LPI2C, LPUART single-wire) will work in open-drain mode.
 2019-08-18 12:02:54 -06:00
Gregory Nutt
eb4fff5221 Minor updates from review of last PR. 2019-08-15 10:05:21 -06:00
Gregory Nutt
8987a9e374 This commit adds initial board support for the NXP S32K118EVB. This configuration is intended, initially, to support development of the architecture support. This is VERY much a work in progress and you should not use this configuration unless you are interested in assisting with the bring-up. 
Squashed commit of the following:

    boards/arm/s32k1xx/s32k118evb/configs/nsh:  Add a basic NSH configuration.
    boards/arm/s32k1xx/s32k118evb/scripts:  Add linker scripts and Make.defs.
    configs/:  Hook the S32K118EVB board into the configuration system.
    boards/arm/s32k1xx/s32k118evb:  Add initial support for the NXP S32K118EVB.
 2019-08-14 08:47:35 -06:00