The SPI2_CS_X and SPI2_SCK pins are used for connection to the LTE modem.
These pins are the special pins for the host interface that are set
automatically by latching the SYSTEM0/1 pins. So, it causes a problem
with increased current consumption when the modem is in power off state.
To prevent it, set these pins to GPIO HiZ during board initialization.
The driver is provided by Spresense SDK
ISX019 has the DOL-HDR feature, which combines images with different exposure so that
both bright and dark data of high-contrast subject can be viewed at the same time.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Change pin initialization timing for camera from board power on to camera device
power on for the following purposes.
- avoid unnecessary power consumption
- Make the corresponding pins available for other uses when camera is not in use
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
Summary:
- I noticed that spresense:rndis_smp and spresense:wifi_smp
do not boot due to the recent change in nx_start.c
- As the result of the discussion, I understand that we have to
add CONFIG_BOARD_LATE_INITIALIZE=y for SMP
Impact:
- spresense only
Testing:
- Tested with spresense:rndis_smp and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
When CONFIG_BOARD_RESET_ON_ASSERT is enabled, board_reset() may be
called on interrupt context. This commit changes to be able to call the
function on interrupt context.
Summary:
- This commit adds CPU activity LEDs feature to spresense
Impact:
- CONFIG_ARCH_LEDS_CPU_ACTIVITY=y only
Testing:
- Arch specific code and defconfigs will be commited later
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
- Add new functions of GNSS
- Support the lower PWM frequency
- Add CONFIG_CPUFREQ_RELEASE_LOCK
- Add high speed ADC support
- Add HPADC input gain configuration
- Add eMMC device
- Frame buffer support
- Fix SD/GNSS/sensor drivers not worked
- Build errors
- Fix nxstyle issues
- Add board specific logic to altair modem dirver
- Fix issue that SPI4 RX frequency violated AC Spec
- Remove dummy buffer in altair driver
- Fix priority of SPI transfer task is too low
- Remove unnecessary configuration
- Modify timeout value for RX ready
- Fix minor bugs
The video stream driver must be intialized from the board to comply with NuttX
NOTE:
Please remove the initalization from any camera example
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf6638a6865bac42150b5957376e55909f041d40
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2ff5c30049a5c5e8ee90baea56e9f4cb1a8a4f87
