Config option IMXRT_ADCx_ETC can now be used to select an external HW
trigger to be used instead of continous trigger. Continous trigger is
used if IMXRT_ADCx_ETC = -1 (default option). Otherwise the source signal
is routed through XBAR and used as a trigger.
Hardware triggering is currently limited to maximum of 8 channels.
HW trigger is automatically disabled if there are more than 8 channels.
The external triggering was tested with PWM signal as a source.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
documentation: Fixed typos in ESP32 Secure Boot section
documentation/esp32: Improved note about the MCUboot port
documentation/esp32: Improved instructions in Secure Boot section
documentation/esp32: Fix information in Secure Boot section
documentation/esp32: Added info in Secure Boot section
documentation/esp32: Fix Secure Boot Instructions
This commit allows the PWM modules to be synchronized by an external
signal (other PWM module for example). The sync source can be selected
from configuration.
PWM module can also now generate a trigger when its timer reaches the duty
cycle. This trigger is used for the synchronization of other modules. It
can also be used for triggering ADC for example in the future.
Thanks to Rastislav Pavlanin and Jan Spurek from NXP support for
suggestion which helped to solve the inter-module PWM synchronization
task.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
* boards/arm/tiva/tm4c129e-launchpad: New subdirectory providing
board support for the Texas Instruments TM4C Crypto Connected
LaunchPad, or more correctly the EK-TM4C129EXL.
* Documentation/introduction/detailed_support.rst,
Documentation/introduction/supported_platforms.rst,
boards/README.txt: Document the additional board support.
* boards/Kconfig:
(ARCH_BOARD_TM4C129E_LAUNCHPAD): New config.
(ARCH_BOARD): Add tm4c129e-launchpad.
(Board-Specific Options): Source the board-specific Kconfig
boards/arm/tiva/tm4c129e-launchpad/Kconfig when selected.
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
In order to better test the lcdddev driver and framebuffer, newer
board configs (for the TTGO T-Display and for the simulator) were
added.
Adjusted references of the sim:lvgl_(fb/lcd) config.
This patch adds corrected implementation of FLASH memory to be used
with progmem driver for use with mtd filesystems like nxffs or smartfs.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
This patch adds to the nucleo-wl55jc previously implemented EXTI support.
Button support with nuttx's button driver is added.
I've written small example to show how to use GPIO EXTI. B3 button can be
used (selectable via Kconfig) to toggle Red LED.
I've added new defconfig for demo purposes. I've included there config
and enabled example programs that are meant to demonstrate functions of
the board and does not really have a place in real world project. Like
Red LED can be toggled with B3 button, or LED example that flashes LEDS,
or button example to show which button has been pressed.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
--
v1 -> v2:
Suggested by: Petro Karashchenko
- Change (1 << 0) to (1 << BUTTON1_BIT (and similar)
v2 -> v3:
- Fix invalid BUTTON3_BIT value
v3 -> v4:
Suggested by: Petro Karashchenko
- Change 0/1 to false/true
This patch implements working support for EXTI GPIO.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
--
v1 -> v2:
Suggested by: Petro Karashchenko
- change (1 << n) to (1 << (n)) in macro definition
- change 1 << X to (1 << X) in code
- fix alignment
v2 -> v3:
Suggested by: Petro Karashchenko
- I was supposed to change (1 << pin) to 1 << pin, not the other way around:)
This patch adds documentation for both stm32wl5 chip family and
nucleo-wl55jc board. I've kept the same directory structure for
arm/stm32 as in arch/ and boards/ directories.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Multiple files were badly formatted, which resulted in many
warnings. This made it harder to check for errors in newly
written documentation.
What's worse, badly formatted text resulted in butchered
output in generated html.
This patch fixes most of the errors, but alas, not all of
the errors can be fixed. Anyway, this should be way easier
to spot errors in newly written docs now.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Follow: http://glennastory.net/boot/sysinit.html
This is first script that init runs is rc.sysinit. This
script does serval initialization tasks about basic service.
The boot sequence currently provided to the board level is:
board_earlyinitialize->
board_lateinitialize(Peripherals driver, core driver, ...)->
run rcS script(mount fs, run service) ->
board_appinitialize->
After this patch:
The boot sequence currently provided to the board level is:
board_earlyinitialize->
board_lateinitialize(core driver,...)->
run rc.sysinit script(mount fs, run core service) ->
board_appinitialize(Peripherals driver)->
run rcS script(run other service)->
So, Peripheral drivers can do more with the file system and
core services.
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
CONFIG_LIBM option may be required by some toolchains that do not include
standard math library. Morover CONFIG_PTHREAD_STACK_MIN was listed twice
in the list.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since VNC server is very useful even without NX:
1.Replace nxgl_coord_t with fb_coord_t
2.Replace nxgl_rect_s with fb_area_s
3.Remove nxgl_xxx function call
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1. Issues regarding caching: The ESP32 has no D-Cache and thus the
issues described there do not apply.
2. Issue regarding assertion: No chip does this at the moment.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
A user reported me an issue while following our documentation
then looking his command line error I noticed the openocd stlink
interface was wrong: st-link-v2.cfg -> stlink-v2.cfg
This commit adds documentation for compiling NuttX for pysimCoder and
then running pysimCoder designed applications on NuttX. PysimCoder is
a Rapid Control Application Development Tool that can transfer block
diagrams into C code and can be used in real time control applications.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This information there is outdated and some of its content should be in
the board documentation and not the chip.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Documentation/reference/os/wqueue.rst:
* Fix spelling, grammar, and typos.
* Improve wording in a few areas.
* Re-wrap the paragraphs that were modified.
Documentation/reference/os/wqueue.rst:
* CONFIG_SIG_SIGWORK: Fix sentence that was cut off in the
middle.
include/signal.h:
* SIGWORK: Fix grammar in comment.
sched/Kconfig:
* config SIG_SIGWORK: Fix ---help--- text to indicate that
this user-configured signal number may be used by various
internal worker threads.
It's better to save one argument by returning pid directly.
This change also follow the convention of task_create.
BTW, it is reasonable to adjust the function prototype a
little bit from both implementation and consistency since
task_spawn is NuttX specific API.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Since 7a046358d9 the top-level COPYING
file has been deleted and replaced by DISCLAIMER, LICENSE, and NOTICE
files. However, some references to the old COPYING file remained in
Kconfig help text and documentation.
Documentation/contributing/coding_style.rst:
Documentation/introduction/about.rst:
boards/arm/lpc17xx_40xx/olimex-lpc1766stk/README.txt:
boards/arm/sam34/arduino-due/README.txt:
boards/arm/sam34/sam4l-xplained/README.txt:
boards/arm/sama5/giant-board/README.md:
boards/arm/sama5/sama5d2-xult/README.txt:
boards/arm/sama5/sama5d4-ek/README.txt:
boards/arm/samd2l2/samd20-xplained/README.txt:
boards/arm/samd2l2/samd21-xplained/README.txt:
boards/arm/samd2l2/saml21-xplained/README.txt:
boards/arm/stm32/hymini-stm32v/README.txt:
boards/arm/stm32/stm3210e-eval/README.txt:
fs/fat/Kconfig:
libs/libc/string/Kconfig:
* Updates stale references to the old top-level COPYING file to
either LICENSE or NOTICE (or both), as appropriate in each
instance.
When CONFIG_SYMTAB_ORDEREDBYNAME is selected most code will use
the ordered search function. When it is not selected no code will
use the ordered search function. This change merges the two
functions and varies its behaviour based on the config setting,
such that all callers can simply call the one search function
and get the best behaviour.
An additional configuration option allows leading underscores to
be stripped from symbols being relocated in loaded objects. This
allows toolchains which prefix C symbol with underscores to make
loadable ELF objects.
