This commit supplements commit 7d877fbb. External sync mode is now
disabled if XBAR connection fails and config options are used directly
in sync_src variable and passed to XBAR macro only when needed. The first
option could caused an undefined behaviour when sync_src was equal to -1
(external sync not used)
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Otherwise, after the rx error occur, the tx output will be
out of sequence, for example:
normal log:
[ 30.163000] 12345678abcdefgh
[ 30.666000] 12345678abcdefgh
[ 31.169000] 12345678abcdefgh
[ 31.672000] 12345678abcdefgh
[ 32.175000] 12345678abcdefgh
[ 32.678000] 12345678abcdefgh
[ 33.181000] 12345678abcdefgh
error log:
he 7 .20]0003 127456c8abgdefch
gde [6.707002] 16345b78afcde
fcde
fghe10010] 5234a678ebcd
77 713 00]41238567dabchefgd
che 7 .21]0003 127456c8abgdefch
gde [8.709002] 16345b78afcde
fcde
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Since tlsr arch support A/B bank, the hardware support
relative addr to load or store, but for flash read,
must use absolute addr. also combine with flash_<*>_method.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fix Compile error from Armclang compiler(AC6):
Error: L6218E: Undefined symbol arm_vectoraddrexcption (referred from arm_vectoraddrexcptn.o).
Signed-off-by: chao an <anchao@xiaomi.com>
Situation:
Assume we have 2 cpus, and busy run task0.
CPU0 CPU1
task0 -> task1 task2 -> task0
1. remove task0 form runninglist
2. take task1 as new tcb
3. add task0 to blocklist
4. clear spinlock
4.1 remove task2 form runninglist
4.2 take task0 as new tcb
4.3 add task2 to blocklist
4.4 use svc ISR swith to task0
4.5 crash
5. use svc ISR swith to task1
Fix:
Move clear spinlock to the end of svc ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
Add support for MCUBoot.
Two new configurations are added:
- mcuboot-loader: mcuboot-loader app used as a bootloader.
main_mcuboot_loader as entrypoint
- mcuboot-app: used as mcuboot agent app. Needs to be
signed manually through "imgtool sign --pad --align 4 -v 0 -s
auto -H 0x200 --pad-header -S 0xc0000 nuttx.hex nuttx_sign.bin"
Signed-off-by: Andres Sanchez <tito97_sp@hotmail.com>
This commit allows the PWM modules to be synchronized by an external
signal (other PWM module for example). The sync source can be selected
from configuration.
PWM module can also now generate a trigger when its timer reaches the duty
cycle. This trigger is used for the synchronization of other modules. It
can also be used for triggering ADC for example in the future.
Thanks to Rastislav Pavlanin and Jan Spurek from NXP support for
suggestion which helped to solve the inter-module PWM synchronization
task.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Modify the file according to the checks
update the board config files, and modify the gd32f4xx_progmem.c
Add chip GD32F450 of GD32MCU
delete the micro FAR, modify code style
Add chip GD32F450 of GD32MCU
This commit enhances imxrt encoder driver with index capture support.
The index is captured when the index interrupt occurs and can be passed
to application layer with QEIOC_GETINDEX ioctl call.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
==2117790==ERROR: AddressSanitizer: global-buffer-overflow on address 0x64d9e3c0 at pc 0x59ac4e16 bp 0xcefe8058 sp 0xcefe8048
READ of size 1 at 0x64d9e3c0 thread T0
#0 0x59ac4e15 in up_nputs sim/up_nputs.c:54
#1 0x59a67e4c in syslog_default_write syslog/syslog_channel.c:220
#2 0x59a67823 in syslog_default_write syslog/syslog_write.c:101
#3 0x59a67f10 in syslog_write syslog/syslog_write.c:153
#4 0x59a651c3 in syslogstream_flush syslog/syslog_stream.c:60
#5 0x59a6564e in syslogstream_addchar syslog/syslog_stream.c:104
#6 0x59a6576f in syslogstream_putc syslog/syslog_stream.c:140
#7 0x5989fc4d in vsprintf_internal stdio/lib_libvsprintf.c:952
#8 0x598a1298 in lib_vsprintf stdio/lib_libvsprintf.c:1379
#9 0x59a64ea4 in nx_vsyslog syslog/vsyslog.c:223
#10 0x598a601a in vsyslog syslog/lib_syslog.c:68
#11 0x59b0e3dc in AIOTJS::logPrintf(int, char const*, ...) src/ajs_log.cpp:45
#12 0x59b03d56 in jse_dump_obj src/jse/quickjs/jse_quickjs.cpp:569
#13 0x59b03ea1 in jse_dump_error1(JSContext*, unsigned long long) src/jse/quickjs/jse_quickjs.cpp:602
#14 0x59b03dd9 in jse_dump_error(JSContext*) src/jse/quickjs/jse_quickjs.cpp:591
#15 0x59bed615 in ferry::DomComponent::callHook(char const*) src/framework/dom/component.cpp:65
#16 0x59bfe0ff in ferry::DomComponent::initialize() src/framework/dom/component.cpp:645
#17 0x59bb141d in dom_create_component(JSContext*, unsigned long long, unsigned long long, unsigned long long) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x365c41d)
#18 0x59b4c0d3 in AIOTJS::__createComponent(JSContext*, unsigned long long, int, unsigned long long*) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x35f70d3)
#19 0x5a56ec17 in js_call_c_function quickjs/quickjs.c:16108
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Summary:
- I noticed that the kernel heap area overlaps the PGPOOL
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
so the user could disable the full image instrumentation,
but enable the instrumentation by files or directories.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
so the user could disable the full image instrumentation,
but enable the instrumentation by files or directories.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
without UBSan
```
text data bss dec hex filename
85612 208 142258 228078 37aee nuttx
```
with UBSan:
```
text data bss dec hex filename
194290 98164 208634 501088 7a560 nuttx
```
```c
int main(int argc, FAR char *argv[])
{
uint32_t ptr[32];
printf("Hello, World!! %lu\n", ptr[64]);
return 0;
}
```
Try to run this sample:
```
nsh> hello
ubsan_prologue: ================================================================================
ubsan_prologue: UBSAN: array-index-out-of-bounds in hello_main.c:39:37
__ubsan_handle_out_of_bounds: index 64 is out of range for type 'uint32_t [32]'
ubsan_epilogue: ================================================================================
Hello, World!! 1070182368
nsh>
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This patch fixes missing comma, found by cppcheck.
rp2040_i2c_slave.c:259:0: error: failed to expand 'modbits_reg32',
Wrong number of parameters for macro 'modbits_reg32'.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
This patch fixes unbuffered mode so it actually works.
Also, patch contains fixes for possible bugs that could result in
deadlock or system hang in certain situations.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Summary:
- This commit applies the following imxrt_enet.c changes to imx_enet.c
commit 522a949ed5
Author: David Sidrane <David.Sidrane@NscDg.com>
Date: Wed Jul 13 11:00:11 2022 -0700
imxrt:enet Better interrupt state handeling
- NOTE: I also fixed typo and compile error in the above commit
Impact:
- imx_enet.c
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit applies the following imxrt_enet.c changes to imx_enet.c
commit 81f03a9151
Author: David Sidrane <David.Sidrane@NscDg.com>
Date: Tue Mar 15 14:27:51 2022 -0700
imxrt:ETH Add Support for ETH2
Impact:
- imx_enet.c
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This change adds support for the following features:
- injected channels (default: 0)
- ADC resolution (default: 12bit)
- ADC low-level operations
- ADC external triggers
- custom ADC interrupts
- ADC sample time configuration
- configurable ADC SCAN mode (default on if DMA)
- configurable ADC DMA mode (default: one shot mode)
- reset the ADC block only if all ADC instances are closed
This change adds support for the following features:
1. PWM complementary outputs
2. interface for low-level PWM operations
3. support for all PWM channel modes
4. support for internal PWM channels (TIM1/TIM8)
5. support for PWM channel polarity and IDLE state
6. support for TRGO and BREAK
Kientis:edma Cleanup
Kinetis:EDMA Interrupt on last TCD
Kintis:edma remove dcache operations on passed data
Data can be chained in TCD and both read and write
can be in the chain. So the dmach ttype is not
relevent for all; the TCDs. Therefor we only perform
dcache operations on internal strutures, The caller
must perform dcache operations on their data.
kinetis:EDMA TCD Alignment of 32 Bytes to support Scatter/Gather
Summary:
- I noticed that ps shows incorrect stack usage when running
getprime in the background.
- With CONFIG_ARCH_ADDRENV=y, a user task including pthread
allocates its stack in the user space that needs to be
accessed with a correct address environment.
- This commit fixes this issue.
Impact:
- CONFIG_ARCH_ADDRENV=y only
Testing:
- Tested with sabre-6quad:knsh on qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
ld: arch/libarch.a(cxd56_allocateheap.c.obj): in function `up_allocate_heap':
arch/arm/src/cxd56xx/cxd56_allocateheap.c:113: multiple definition of `up_allocate_heap'; arch/libarch.a(arm_allocateheap.c.obj):
arch/arm/src/common/arm_allocateheap.c:110: first defined here
Signed-off-by: chao.an <anchao@xiaomi.com>
arch/arm/src/common/arm_hostfs.c: In function 'host_read':
arch/arm/src/common/arm_hostfs.c:156:24:
warning: passing argument 1 of 'up_invalidate_dcache' makes integer from pointer without a cast [-Wint-conversion]
156 | up_invalidate_dcache(buf, buf + count);
| ^~~
| |
| void *
In file included from arch/arm/src/common/arm_hostfs.c:26:
include/nuttx/cache.h:261:37: note: expected 'uintptr_t' {aka 'unsigned int'} but argument is of type 'void *'
261 | void up_invalidate_dcache(uintptr_t start, uintptr_t end);
| ~~~~~~~~~~^~~~~
Signed-off-by: chao.an <anchao@xiaomi.com>
This commit adds RX DMA support to serial driver. The DMA is currently
supported only for USART peripherals, not for UART. It uses two circular
buffers which size can be setup by SAMV7_SERIAL_RXDMA_BUFFER option.
The idle bus interrupt is enabled to ensures data are read even if the
buffer is not yet full. The timeout can be setup by
SAMV7_SERIAL_DMA_TIMEOUT option.
This adds support only for RX transfers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds functions sam_dmarxsetup_circular() and
sam_dmarxstart_circular() that create API for operating with two or more
circular buffers. This can be used for DMA operation with serial driver
or ADC where ping pong buffers are required to successfully transfer the
data at high speed.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit enhances SAMV7 serial driver with RS-485 mode available to
USART peripherals. The hardware automatically sets RTS pin high when
data are transfered and low then no transfer occurs. Only USART peripherals
support this mode, UART peripherals do not.
This mode can be enabled by configuration option SAMV7_USARTx_RS485MODE.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1. Fix error recovery mechanism during transmission error
handling (enable transmission at the end).
2. Fix compilation / operation with CONFIG_SAMV7_EMAC_PREALLOCATE=y
3. Enable fully configured address space for transmission queues
to allow sending packets with length more than 976 bytes. With
partially configured address space the AHB error is generated
during transmission of long packets.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
forget to update in this patch:
commit b02db04e00
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jun 5 17:10:19 2022 +0800
arch/assert: Keep the thread dump column order same as ps
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
* arch/arm/src/tiva/common/tiva_lowputc.c
(tiva_lowsetup):
For each UART, if Kconfig enables RTS/CTS (e.g.,
CONFIG_UART0_IFLOWCONTROL and/or CONFIG_UART0_OFLOWCONTROL),
configure the corresponding GPIO(s).
* arch/arm/src/tiva/common/tiva_serial.c:
(struct up_dev_s):
If CONFIG_SERIAL_IFLOWCONTROL, add a bool field 'iflow'. If
CONFIG_SERIAL_OFLOWCONTROL, add a bool field 'oflow'. This is
inspired by the implementation for kinetis.
(g_uart0priv, g_uart1priv, g_uart2priv, g_uart3priv, g_uart4priv,
g_uart5priv, g_uart6priv, g_uart7priv):
If Kconfig enables RTS/CTS for a UART (e.g.,
CONFIG_UART0_IFLOWCONTROL thru CONFIG_UART7_OFLOWCONTROL), set
the corresponding iflow and/or oflow flag(s).
(up_setup):
Check the above-mentioned iflow and oflow flags and set or unset
the RTSEN and/or CTSEN bits in the UART's CTL register to enable
the feature.
The "p" format specifier already prepends the pointer address with "0x"
when printing.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
SAMA5D2 and SAMA5D4 does not support external reset.
Some SAMA5 board's Kconfig contain item SAMA5_SYSTEMRESET, but it is better in arch/arm/src/Kconfig.
When using HSE to clock RTC NuttX internal time is gaining 5.5 second per
minute. Problem was NuttX using 7182 for one of the RTC division factors,
it should have been 7812. The incorrect factors used are 7182 and 0xff.
These are used in 3-4 places within Nuttx and other places as 7812 and 0xff.
However, the STMicro app note AN4759 suggests using 7999 and 124, which is
what I've used.
Explanation: These 2 factors are used to divide the HSE clock (which at this
point is 1 MHz) to 1 Hz for the RTC hardware.
To test the 2 factors, add 1 to both numbers and multiply them together.
The result needs to be as close as possible to 1 MHz.
The suggested values of 7999 and 124 => 8000*125 = 1,000,000, the prime
factors. So, the best fix for Nuttx would be these values.
Issue discovered and fixed by Peter Moody
This patch adds corrected implementation of FLASH memory to be used
with progmem driver for use with mtd filesystems like nxffs or smartfs.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Summary:
- I noticed that QEMU shows a high CPU load.
- This commit re-adds imx_idle.c to avoid this issue.
Impact:
- None
Testing:
- Tested with sabre-6quad:smp with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This patch implements working support for EXTI GPIO.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
--
v1 -> v2:
Suggested by: Petro Karashchenko
- change (1 << n) to (1 << (n)) in macro definition
- change 1 << X to (1 << X) in code
- fix alignment
v2 -> v3:
Suggested by: Petro Karashchenko
- I was supposed to change (1 << pin) to 1 << pin, not the other way around:)
This patch adds new chip family, stm32wl5x. This is bare minimum
implementation of said chip. I've tested this by running nsh.
There are only two chips in this family, stm32wl55 and stm32wl54.
The only difference between them is that stm32wl55 has LORA.
stm32wl5 is dual CPU (not core!). Right now only CPU1 is implemented.
CPU0 has access to radio hardware (while CPU1 does not). Chip is
designed so that CPU0 handles radio traffic while CPU1 does the
heavy lifting with data - there is communication pipe between two
CPUs.
I plan to use nuttx on CPU1 and LORA from stm32cube on CPU0 so I
don't have implementing CPU0 right now - once we have working LORA
in nuttx this may change.
Peripherals (except for radio) are shared so it's best to focus on
CPU1 to initialize all peripherals so that CPU0 can only use them
later. There is no real benefit to implement CPU0 if we don't have
working LORA/radio support in nuttx.
In time I will be implementing more and more things from this chip.
Right now I would like this minimal implementation to be merged in
case someone wants to work on this chip as well.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
---
patch v1->v2
- fixed formatting (suggested by Alan Carvalho de Assis)
- rebased patch to master (previous patch was based on nuttx-10.2
and did not compile on master)
Change pin initialization timing for camera from board power on to camera device
power on for the following purposes.
- avoid unnecessary power consumption
- Make the corresponding pins available for other uses when camera is not in use
RF and system timer interrupt are used for ble.
tlsr82_flash.c:
1. BLE will loss packets during flash operation beacause the interrupt
is disabled and the operation take too long (especially erasing,
about 100ms), so allow RF and system timer interrupt during flash
operation;
2. Add sched_lock()/sched_unlock() to avoid the task switch in ble and
system timer interrupt;
flash_boot_ble.ld:
3. Because of 1, the code executes in RF and system timer interrupt
must be in ram to avoid bus error. The sem_post() will be called and
const variable g_tasklisttable will be accessed in RF and system
timer interrupt handler;
4. To improve the performance, copy some frequently called function to
ram as well, such as: sem_take(), sched_lock(), sched_unlock(),
some lib functions, some zephyr ble functions and some tinycrypt
functions;
5. The RF and system timer interrupt handler will call some libgcc
functions, so copy all the libgcc functions to ram exclude _divdi3.o,
_udivdi3.o and _umoddi3.o;
tlsr82_serial.c
6. Make up_putc() be thread safe, add enter/leave_critical_section() in
function uart_send_byte();
tc32_doirq.c
7. Increase the RF and system timer interrupt response priority;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The current SAMv7 PWM driver assumes that all PWM channels should
work in sync mode, but that is a partial case of a generic PWM
driver operation.
Start SAMv7 PWM channels in async mode. The sync mode should be
implemeted either using ioctl command or via a separate Kconfig
option.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
1. Add vbat mode for chip internal voltage sample;
2. Add adc channel config;
3. Using DFIFO2 to get the sample value, follow telink sdk.
4. Add calibration function and config;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Number of channels are now set based on enabled modules (channels) in
configuration instead of the usage of static 4.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Number of channels are now set based on enabled channels in configuration
instead of the usage of static 4.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Implement a generic access rights modification procedure instead
of the procedures that only do one thing (enable/disable write)
to one section (text).
1. using armv6-m arm_irq();
2. simplify the interrupt number get process;
3. To improve the performance, move common exception code to ram_code.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
fix warning:
common/arm_createstack.c: In function 'up_create_stack':
common/arm_createstack.c:154:11: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
1. add pulse count support for pwm0;
2. add more detailed config for pwm;
3. pwm configuration and start process optimize;
4. tlsr82/Kconfig format;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Summary:
- TIVA_WITH_QEMU is used to run the NuttX with QEMU
- The configuration should not depend on TIVA_ETHERNET
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In case of SMP and ADDRENV, allocate the page table for each cpu
- Each cpu holds separated addrenv and MMU setting
Impact:
- armv7-a
Testing:
- sabre-6quad:smp w/ qemu
- sabre-6quad:knsh w/ qemu
- sabre-6quad:knsh_smp w/ qemu (WIP)
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Note that pinmap.h, irq.h, fdcan.h still need to be updated with proper
register definitions for the FDCAN3 peripheral present in
STM32H7[2|3][3|5] MCUs
Adds stubs for up_addrenv_text_enable/disable_write. These don't have
to do anything as the ARM MMU allows setting access per mode. Currently
the settings for user .text area grants the kernel write access, but
revokes user write access.
Summary:
- The stack pointer is subtracted to alloc xcptcontext area
in the __cpu?_start block
- Fix the stack coloration overrun to the previous cpu's xcpt area
Impact:
- armv7-a's smp configuration
Testing:
- smp and ostest on sabre-6quad:smp w/ qemu
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Summary:
- Use CPS instruction to change cpu mode for code simplification
- CPS which changes cpu mode is available in armv6 and above
Impact:
- armv7-a/r
Testing:
- smp and ostest on sabre-6quad:smp w/ qemu
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Using the Kconfig macro does not work for RISC-V target, as there the
user heap follows .data/.bss and does not obey any Kconfig provided
boundary.
Added stubs for ARM and Z80 also.
common/arm_assert.c:80:14: warning: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Wformat]
stack, ptr[0], ptr[1], ptr[2], ptr[3],
^~~~~
include/debug.h:119:59: note: expanded from macro '_alert'
__arch_syslog(LOG_EMERG, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
~~~~~~ ^~~~~~~~~~~
Signed-off-by: chao.an <anchao@xiaomi.com>
Selecting this option will pass "-Map=$(TOPDIR)$(DELIM)nuttx.map" to ld
when linking NuttX ELF. That file can be useful for verifying
and debugging magic section games, and for seeing which
pieces of code get eliminated with DEBUG_OPT_UNUSED_SECTIONS.
Signed-off-by: chao.an <anchao@xiaomi.com>
Enable this option to optimization the unused input sections with the
linker by compiling with " -ffunction-sections -fdata-sections ", and
linking with " --gc-sections ".
Signed-off-by: chao.an <anchao@xiaomi.com>
This PR resolved 2 issues:
1. CURRENT_REGS is not set correctly on swint handling
2. group env is not changed properly
Signed-off-by: chao.an <anchao@xiaomi.com>
since it is broken and inefficient, and then removed by:
commit dc961baaea
Author: chao.an <anchao@xiaomi.com>
Date: Thu Apr 14 18:07:14 2022 +0800
arm/armv7-[a|r]: move fpu save/restore to assembly handler
Save/Restore FPU registers in C environment is dangerous practive,
which cannot guarantee the compiler won't generate the assembly code
with float point registers, especially in interrupt handling
Signed-off-by: chao.an <anchao@xiaomi.com>
commit 8d66dbc068
Author: chao.an <anchao@xiaomi.com>
Date: Thu Apr 7 13:48:04 2022 +0800
arm/armv[7|8]-m: skip the fpu save/restore if stack frame is integer-only
Signed-off-by: chao.an <anchao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Save/Restore FPU registers in C environment is dangerous practive,
which cannot guarantee the compiler won't generate the assembly code
with float point registers, especially in interrupt handling
Signed-off-by: chao.an <anchao@xiaomi.com>
Otherwise we will try to dump the state of the current task, however the
exit handler has already started doing some cleanup and invalidated its
group. Accessing the group from dumponexit will crash.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
"error: incompatible types when assigning to type 'struct filelist *' from type 'struct filelist'
filelist = tcb->group->tg_filelist;"
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Fix stm32_stdclockconfig for stm32u585xx to the extend that the
B-U585I-IOT02A board's clock tree can be configured. This board uses
the MSIS as PLL1's input clock and the LSE to autotrim the MSIS.
The SPSR is used to store the current value of the CPSR when an exception
is taken so that it can be restored after handling the exception.
Each exception handling mode can access its own SPSR.
User mode and System mode do not have an SPSR because they are not
exception handling modes.
Signed-off-by: chao.an <anchao@xiaomi.com>
since xcpt always point to the stack after the below change:
commit 7b9978883c
Author: chao.an <anchao@xiaomi.com>
Date: Tue Mar 1 01:06:24 2022 +0800
arch/arm: optimize context switch speed
The current context save implementation saves registers of each task
to xcp context, which is unnecessary because most of the arm registers are
already saved in the task stack, this commit replace the xcp context with
stack context to improve context switching performance and reduce the tcb
space occupation of tcb instance.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The xxx_netinitialize is defined to a function only if
CONFIG_NET=y and CONFIG_NETDEV_LATEINIT=n. Otherwise it
is defined to an empty macro.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
The current context save implementation saves registers of each task
to xcp context, which is unnecessary because most of the arm registers are
already saved in the task stack, this commit replace the xcp context with
stack context to improve context switching performance and reduce the tcb
space occupation of tcb instance.
Signed-off-by: chao.an <anchao@xiaomi.com>
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
by fixing filter initialization.
STM32F7 CAN3 works in single peripheral configuration and there is only 14 filter banks: 0-13. Previously not available 14 indexed filter (CAN_NFILTERS/2) was wrongly used for for receiving to FIFO. Now zero indexed filter is correctly used instead.
Summary:
- I noticed that when exiting getprime, DEBUGASSERT happens in
nxsem_wait()
- Finally, I found that up_putc() uses nxsem_wait()
- This commit fixes this issue by removing the semaphore.
- Also, up_putc() now calls imx_lowputc()
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arm: Avoid call k[u]mm_memalign to save the code size
ceva: Correct stack_base_ptr usage(top of stack v.s. bottom of stack)
mips: Correct the stack alignment in up_use_stack
misoc: Correct the stack alignment in up_use_stack
or1k: Correct the stack alignment in up_use_stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
