sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
39,699 Commits 1 Branch 0 Tags 291 MiB
392c2948e5
Commit Graph

1103 Commits

Author SHA1 Message Date
Daniel Pereira Volpato
d78e60d18e boards/arm/stm32f0l0g0/nucleo-g070rb: Initial support for board STM32 NUCLEO-G070RB, including NSH config 2019-09-17 11:20:26 -06:00
Alin Jerpelea
b55c518a1a Merged in alinjerpelea/nuttx (pull request #1031) 
boards: spresense: add isx012 camera initialization and config

* boards: spresense: add isx012 camera initialization

    Add the initialization for the isx012 camera sensor.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: spresense: add camera defconfig

    For easy configuration add camera defconfig for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-09-17 16:58:09 +00:00
Juha Niskanen
ebc6f51641 Fix some typos 2019-09-17 10:46:23 -06:00
Gregory Nutt
8d87e624bf boards/arm/cxd56xx/spresense/Kconfig: Add a configuration to select if an extension board is attached to the SPresence. If there is no extension board attached, the SPresense may run in a low-power mode by default (as determined by the CONFIG_CXD56_CUSTOM_PINCONFIG option). If an extension board is present, then the SPresense will need to run at a higher power mode, selected by the new CONFIG_SPRESENSE_EXTENSION option. 2019-09-17 05:41:10 -06:00
Takayoshi Koizumi
ef28729374 boards/arm/cxd56xx/spresense/include/board_pinconfig.h: Add board specific pin configurations of CXD5602 pins to fit Spresense board. 2019-09-16 15:32:58 -06:00
Gregory Nutt
5995714cfd boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes. 2019-09-16 08:14:32 -06:00
Gregory Nutt
66a55c91e7 Linker scripts: Fix some alignment problems. 2019-09-15 18:06:36 -06:00
Gregory Nutt
805fa49a4e Back out/change some of the alignments in the previous comments. Non-ARM CPUs my have different alignment requirements. AVR, for example, has none. MIPS requires 16-byte alignment of the end of .bss. 2019-09-15 18:02:00 -06:00
Gregory Nutt
2925c28f8f All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces. 2019-09-15 17:22:16 -06:00
Gregory Nutt
0bd60c3722 All linker scripts: Preface all _ebss defininitions with . = ALIGN(4). Otherwise, the last bytes in the .bss section will not be initialized properly. Also convert all linker scripts that use TABs to spaces. 2019-09-15 15:27:58 -06:00
Gregory Nutt
c5ed221e87 Trivial typo fix 2019-09-15 08:16:37 -06:00
Gregory Nutt
e2949d0dcf boards/arm/stm32/axoloti, omnibusf4, and stm32f4discovery: If CONFIG_SCHED_CRITMONITOR is selected, then make sure that ITM and DWT resources are enabled before accessing ITM and DWT registers. By default, these registers are disabled. Suggested by Juha Niskanen. 2019-09-13 07:22:00 -06:00
Nathan Hartman
3ca55cc439 boards/arm/tiva/tm4c123g-launchpad/scripts/tm4c123g-launchpad.ld: Add alignments for the TMC4123G-LaunchPad as well. 2019-09-12 10:03:39 -06:00
Gregory Nutt
bbbe9d85c5 Move EXIDX assignments inside of braces so that we can be assure that the symbols have the correct alignment. Suggested by Daniel P. Volpato 
Squashed commit of the following:

    Some scripts use TABs, others spaced.  Make usage consistent.
    Move __exidx_end assignment inside of brackets.
    Remove old __exidx_end assignment.
    Move __exidx_start assignment inside of brackets.
    Remove old __exidx_start assignment
 2019-09-12 09:57:50 -06:00
Gregory Nutt
94224639ca Fix a few errors introduced into linker scripts by recent commits. 2019-09-12 08:11:27 -06:00
Gregory Nutt
50f9e26d5d Modify all a few more linker scripts missed in 415e3d3448, probably because they were created after 2eb4fe5ffb. 2019-09-11 21:10:51 -06:00
Alan Carvalho de Assis
415e3d3448 Modify all files from 2eb4fe5ffb to use solution from Daniel P. Volpato. 2019-09-11 21:00:41 -06:00
Daniel Pereira Volpato
490d945f3e boards/arm/stm32f0l0g0/nucleo-g071rb/scripts/ld.script: Fix .ARM.exidx section overlap with .data 2019-09-11 12:49:37 -06:00
Gregory Nutt
d8adf712a2 boards/arm/imx6/sabre-6quad/scripts/Make.defs: Yet another boards/ re-organization fixup. 2019-09-11 11:17:07 -06:00
Gregory Nutt
5a41d7f9b5 boards/: Several more fixes to Make.defs files and README.txt files. More collateral damage from the big boargs/ directory re-organization. 2019-09-11 11:15:56 -06:00
Gregory Nutt
ad0248db44 boards/z80: Correct path to linker script in all boards using the ZDS-II toolchain. Yet more fallout from the big boards/ directory re-organization. 2019-09-11 10:19:16 -06:00
Nathan Hartman
366053e464 Fix typos, 1 in a #define, others in comments. This changes one definition: _MQ_TIMEDRECIEVE is changed to _MQ_TIMEDRECEIVE. It appears this symbol is not used anywhere. 2019-09-11 08:56:56 -06:00
Gregory Nutt
cc694e9862 Fix some new warnings found in build testing. 2019-09-10 08:20:53 -06:00
Pavel Pisa
97dfff2011 boards/arm/lpc17xx_40xx/lx_cpu/configs/nsh/defconfig: Tested ETHRENET, UARTs, heap in external SDRAM, use of symbol tables for applications loading over TFTP and kernel modules insertion. USB and SD card enabled but there are some issues (probably config or IO ports) still. 2019-09-10 07:21:01 -06:00
Nathan Hartman
91ef2ec394 Fix a few minor typos 2019-09-08 15:59:14 -06:00
Nathan Hartman
f6b80dd0f9 boards/Kconfig: Fix help text for BOARDCTL_IOCTL. 2019-09-06 15:55:57 -06:00
Juha Niskanen
822bb06967 Fix some typos. Also minor update to stm32f7/nucleo-144/README.txt and stm32l4/nucleo-l496zg/README.txt board documentation. 2019-09-05 08:12:50 -06:00
Nathan Hartman
ce8fb54d07 Fix various typos 2019-09-03 17:00:22 -06:00
Augusto Fraga Giachero
68bbc8438c drivers/timers/pwm.c: Move the pwm/pwm.c driver to timers/pwm.c, The drivers/pwm contained only one .c file (pwm.c), so to avoid the proliferation of sub-directories inside drivers/ is better to move the pwm.c driver to drivers/timers. The pwm.h header was moved to include/nuttx/timers to keep consistency, so all files referencing it need to be updated. 2019-09-02 07:57:10 -06:00
Gregory Nutt
85770966ff boards/Board.mk: Add support to pass dependency paths. boards/arm/cxd56xx/common/Makefile: Add correct dependency paths for board/ and src/ subdirectories. 2019-09-01 12:19:36 -06:00
Gregory Nutt
c6434e3182 boards/arm/lpc17xx_40xx/lx_cpu/configs/nsh/defconfig: Correct shit defconfig file. Recent patch dumped a prohibited .config file as the defconfig file when a proper defconfig file created via 'make savdefconfig' is required. Bad. 2019-08-31 14:35:17 -06:00
Gregory Nutt
e5c3874a3b Tiva directories: Fix TM4C129XNCZAD part number in Kconfig and identifiers. Rationale: Fully specify that this is the 212-pin BGA package (ZAD ending) and for consistency with earlier changes to other Tiva TM4C12x part numbers in Kconfig names and identifiers. 2019-08-30 08:46:57 -06:00
Gregory Nutt
dc09d7018b Coding style fixes. Run every new file through tools/nxstyle to assure that it is close to the NuttX coding standard. 2019-08-30 08:37:27 -06:00
Pavel Pisa
64c918783b boards/arm/lpc17xx_40xx/lx_cpu/src/lpc17_40_ulan.c: Provides for separate, non-standard uLAN registration at build-/run-time. 2019-08-30 07:58:05 -06:00
Gregory Nutt
c354e8f40e board/Kconfig and board/README.txt: Add configuration support for the LX_CPU board. 2019-08-30 07:50:46 -06:00
Pavel Pisa
350ba5105c boards/arm/lpc17xx_40xx/lx_cpu: Add support for the PIKRON LX_CPU board. 2019-08-30 07:42:13 -06:00
Alin Jerpelea
3806a01c5d Merged in alinjerpelea/nuttx (pull request #1024) 
noards: arm: cxd56xx: migrate common code

* boards: arm: cxd56xx: common: move boot to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move flash to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move I2C driver to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move uid to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move usbmsc to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add SPH

    The SPH is used by the ASMP implementation from the SDK.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-26 14:29:55 +00:00
Gregory Nutt
da9433a4c7 Fix another warnings and an error in typing introduced in the previous commit related to BINFS in PROTECTED mode. 2019-08-25 18:37:23 -06:00
Gregory Nutt
f751aff7fe boards/boardctl.c and libs/libc/builtin: The BINFS file system uses the same builtin library and builtin arrays as does NSH. The builtin arrays are simple name-value pairs that map builtin function names with the user-space entry point. In the FLAT build, the builtin arrays are available everywhere via the backdoor left open by the FLAT address space. In the PROTECTED build, however, the kernel must maintain its own reference to the user-space builtin array. This commits adds those kernel globals and a new boardctl(BOARDIOC_BUILTINS) that can be used by applications to the provide the builtin list reference to the kernel. 2019-08-25 16:58:43 -06:00
Gregory Nutt
fb50a65756 boards/: Move more drivers directories at were placed too high in the hieararchy. 2019-08-24 14:42:14 -06:00
Ouss4
c8b1dcc5ab boards/mips/pic32mx&z/drivers/Kconfig: The drivers folder was one level above where it should be. 2019-08-24 14:28:44 -06:00
Gregory Nutt
27e4bfffd4 Update some comments and README files. 2019-08-24 13:06:43 -06:00
Gregory Nutt
e4c333820a tools/refresh.sh: Fix some remaining breakage from the boards/ directory reorganization; boards/arm/s32k1xx: Add CONFIG_NSH_ARCHINIT=y to all NSH configurations. 2019-08-24 08:43:46 -06:00
Gregory Nutt
dd97fb991b This commit moves shared builtin information out of binfmt/libbuiltin and into libs/libc/builtin where it can be shared. This should permit builtin application in the PROTECTED build where binfmt/libbuiltin is not available in user space. 
Squashed commit of the following:

    Correct some additional compile-related issues.

    Move  include/nuttx/binfmt/builtin.h to include/nuttx/lib/builtin.h.  Move apps/builtin/lib_builtin_forindex.c to libs/libc/builtin/lib_builtin_forindex.c.

    Move binfmt/libbuiltin to libs/libc/builtin.  There are calls made directly from apps/nshlib into this logic and hence, must be part of a library that can be shared between the OS and applications.
 2019-08-23 09:07:40 -06:00
Gregory Nutt
b3d609959c arch/arm/src/s32k1xx/hardware/s32k1xx_flexcan.h: Add an incomplete FlexCAN register definition header file. Still missing some bitfield definition. Also updates some README files. 2019-08-23 07:35:49 -06:00
Alin Jerpelea
6ecee7e403 Merged in alinjerpelea/nuttx (pull request #1021) 
boards: cxd56xx: add SCU sensors (2/2)

* boards: cxd56xx: add cxd56_bh1721fvc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bh1745nuc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1383glv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1422gmv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmp280 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_kx022 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_lt1pa01 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_rpr0521rs initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_sensors initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add Backup Log driver

    The driver will be used to backup logs on crash.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: add crashlog driver

    Add Crashlog driver with support for reset on crash

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move gs2200m initialization

    Move the board gs2200m initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move ili9340 initialization

    Move the board ili9340 initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move lpm013m091a initialization

    Move the board lpm013m091a initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: typo fixes

    HEADER: Updates on file location
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-23 13:28:35 +00:00
Gregory Nutt
3613ae33a7 boards/arm/s32k1xx/s32k118evb, s32k146evb, and s32148evb: Correct the 'sense' of the LED discrete output. A high level illuminates the LED. 2019-08-22 12:12:22 -06:00
Gregory Nutt
37960ff780 All S32K1xx flash.ld configurations: Do not write into FLASH configuration field. 
Extend s32k146 and s23k148 NSH configurations so that they support more features.
 2019-08-22 08:26:27 -06:00
Alin Jerpelea
d6366c1e82 Merged in alinjerpelea/nuttx (pull request #1019) 
Add the sensor initialization for cxd56xx boards in the common board folder

* boards: cxd56xx: apds9930: typo fix

    fix apds9930 typos

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_ak09912 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: move cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_apds9930 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_apds9960 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-22 13:55:35 +00:00
Alin Jerpelea
a91d86523c Merged in alinjerpelea/nuttx (pull request #1018) 
boards: cxd56xx: add SCU sensors

* drivers: platform: add Avago APDS9930 Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BH1721FVC Ambient Light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BH1745NUC Color Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BM1383GLV/BM1383AGLV Pressure Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BM1422GMV/BM1422AGMV Magnetic Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Bosch BMI160 Sensor support

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Bosch BMP280 Barometic Pressure Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Kionix KX022/KX122 Acceleration Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Murata LT1PA01 Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm RPR0521RS Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: sensors: bmi160: add optional I2C address

    Add a menu option for the case when the SDO pin is pulled to VDDIO

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-22 12:49:05 +00:00
Gregory Nutt
6ddd4752b0 Eliminate new warnings found in build testing. 2019-08-21 13:45:31 -06:00
Alin Jerpelea
3ed844640d Merged in alinjerpelea/nuttx (pull request #1015) 
tools: unix: add support for common board folder

* tools: unix: add support for common board folder

    this patch adds support for a common board folder and simplifies the code
    and maintenance on boards that share the same code

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cxd56xx: migration to a common folder

    This is the first platform to be migrated to the new common folder
    structure.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-21 17:25:16 +00:00
Nathan Hartman
be5a40c656 Fix typos in comments. 2019-08-21 09:32:59 -06:00
Alin Jerpelea
c6355f58d6 Merged in alinjerpelea/nuttx (pull request #1014) 
boards: add stub drivers folder for later use

* boards: add stub drivers folder for later use

    The board/drivers folder is added for future use.

    In this folder we should place drives that are platform specific and
    depend on HW that is present only on a specific platform.

    NOTE: All shared drivers should go to the regular driver folder
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: shift BOARD_DIR one level up

    In preparation for drivers and common folders we are moving the
    BOARD_DIR path up one level.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: add drivers/platform symlink

    Link the boards/<arch>/<chip>/drivers dir to drivers/platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: add platform specifc drivers extension

    There are platforms that use specific drivers and we should be able to
    include those drivers in the build

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* board: cxd56xx: drivers: add AK09912 driver for SCU

    This is a platform specific driver connected on the SCU unit.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-21 13:39:29 +00:00
Gregory Nutt
507e01cb8e This commit adds support for the NXP S32K148EVB 
Squashed commit of the following:

    boards/arm/s32k1xx/s32k148evb:  Correct linker scripts for the S32K148, Update README files, Hook eht S32K148EVB into the configuration and build system.

    arm/s32k1xx/s32k148evb:  Verify core and peripheral clocking.  It is the same as the S32K146EVB.  Fixed one-too-many copy-paste error in both.

    boards/arm/s32k1xx/s32k148evb:  Correct LED and button pin number for the S32K148EVB.

    boards/arm/s32k1xx/s32k148evb:  Change all occurrences of 146 to 148.

    boards/arm/s32k1xx/s32k148evb:  Initial S32K148EVB.  Initial commit is just  clone of S32K146EVB with file name changes
 2019-08-20 17:02:29 -06:00
Gregory Nutt
5655a9d362 Update README files. 2019-08-20 14:39:46 -06:00
Gregory Nutt
c6026d7500 With these changes the S32K146EVB minimal NSH is function. Only verifed while running from SRAM. 
arch/arm/src/s32k1xx/s32k1xx_lowputc.c:  Fix a typo that prevented LPUART1 from working.
    arch/arm/src/s32k1xx/s32k1xx_periphclocks.c and related files:  Fix yet another case of confusion between pre-decremented and non-decremented divider values.  Enforce the rule that dividers are not decremented until the moment they are written into registers.
    arch/arm/src/s32k1xx/s32k1xx_clockconfig.c:  Fix another problem related to whether a divider is pre-decremented or not.  The answer must be the divder values are never pre-decremented.  They are decremented just before being written to hardware.
    arch/arm/src/s32k1xx/s32k1xx_clockconfig.c:  Clean up some bad conditional logic.  Precedence of operators problem.
    boards/arm/s32k1xx/s32k118evb:  Add support for execution out of SRAM.  This is helpful for bringup when you want to avoid putting a lethal image in FLASH.
    arch/arm/src/s32k1xx/s32k1xx_clockconfig.h:  Remove crystal frequency, it is not used.
    arch/arm/src/s32k1xx/s32k1xx_wdog.h:  Fix a typo in a register name.i
    boards/arm/s32k1xx/s32k*evb/configs/nsh/defconfig:  Create Motorola SREC output format.
 2019-08-20 14:35:36 -06:00
Gregory Nutt
faf8bdcbf8 Eliminate some new warnings found in build testing 2019-08-19 17:50:04 -06:00
David Sidrane
d20d0227ae Merged in david_s5/nuttx/master_h7 (pull request #1008) 
stm32h7:Ported UID from F7

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-19 22:21:11 +00:00
Gregory Nutt
4d2f6e85b8 boards/arm/stm32h7/nucleo-h743zi/src/nucleo-h743zi.h: Correct logic that determines if the RTC driver is available. Find in build testing. 2019-08-19 13:17:28 -06:00
Gregory Nutt
df1294906d arch/arm/src/s32k1xx/s32k1xx_clockconfig.c and related files: Fix confusion about who decrements the rster value. Some dividers may have a function range of 1..8 but the register value is 0..7. There were several places where values were getting decremented twice: Once by higher up logic and once by the register access logic. A such dividers were reviewed and, hopefully, all were fixed. 2019-08-19 13:07:45 -06:00
Gregory Nutt
33ab25ae14 arch/arm/src/s32k1xx/s32k14x and boards/arm/s32k1xx/s32k146evb/src: Numerous fixes to get a clean build of the S32K146EVB. 2019-08-19 10:49:50 -06:00
Alin Jerpelea
d42fc094fa Merged in alinjerpelea/nuttx (pull request #1003) 
arm: stm32: codestyle fixes

* arm: stm32f0l0g0: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32f7: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32h7: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32l4: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-19 15:16:08 +00:00
Gregory Nutt
39d1a02c6d This commit adds support for the S32K146EVB 
Squashed commit of the following:

    s32k1xx/s32k146evb/scripts/flash.ld:  Update the linker script for the S32K146.
    boards/:  Hook the S32K146EVB into the configuration and build system.
    s32k146_clockconfig.c:  Add S32K146 clock configuration.
    boards/arm/s32k1xx/s32k146evb/src/s32k146_periphclocks.c:  Update peripheral clocking for the S32K146.
    arm/s32k1xx/s32k146evb:  Initial support fo S32K146EVB.  Starting point is just the S32K118EVB with name changes.
 2019-08-19 09:14:14 -06:00
Gregory Nutt
c3f16a46f0 This commit brings the S32K118EVB board to code complete and ready for testing. This commit adds some minor initialization fixes (like disabling the WDOG, enabling the I-cache, and initializing the MPU. It brings more files in from the Kinetis port for the IDLE loop and for GPIO functionality. This also address register definition header file for LMEM and MPU. 2019-08-18 17:26:10 -06:00
Gregory Nutt
db0641556e boards/arm/s32k1xx/s32k118evb: Implement board support for LEDs and buttons. This is taken from the Freedom-K66f with has the same LED and button configuation as the S32K116EVB and uses the same GPIO IP. 
boards/arm/s32k1xx/s32k118evb/include/board.h:  Add LPUART0 pin disambiguation.

arch/arm/src/s32k1xx/hardware:  Add pin mux definitions for S32K116, 118, 142, 144, 146, and 148.

arch/arm/src/s32k1xx/s32k1xx_pin.c and .h:  Add support for PIDR register that disables a gneral purpose pin from acting as an input.

arch/arm/src/s32k1xx/s32k1xx_pin.c and .h:  The device does not support slew rate controls or open drain (on all the pins).  Only pins that are configured for a protocol that requires open-drain (e.g;, LPI2C, LPUART single-wire) will work in open-drain mode.
 2019-08-18 12:02:54 -06:00
Gregory Nutt
e7a3231d7a Squashed commit of the following: 
Finishes peripheral clock initialization:

      arch/arm/src/s32k1xx/s32k11x/s32k11x_clockmapping.c
      arch/arm/src/s32k1xx/s32k14x/s32k14x_clockmapping.c
        Provide MCU-specific mapping of clock names to PCC control registers.

      boards/arm/s32k1xx/s32k118evb/src/s32k118_periphclocks.c
        Provides initial clocking for for the S32K118EVB

    arch/arm/src/s32k1xx/s32k1xx_periphclocks.c:  Add logic to initialize peripheral clocking.

    arch/arm/src/s32k1xx/s32k1xx_clockconfig.c:  Add SIM clock configuration.
 2019-08-17 11:50:32 -06:00
Gregory Nutt
1f021add53 arm/arm/src/stm32f7 and h7: Fix coding standard problems found by tools/nxstyle in files modified/added in last PR. 2019-08-17 08:20:31 -06:00
David Sidrane
1bbf5c9449 Merged in david_s5/nuttx/master_h7 (pull request #1002) 
stm32h7 RTC and friends  support

* stm32h7:Removed f7 in file path

* stm32f7:Fix overwritten IRQ enabled

       System boot order calls clock_initialize then up_initalize.
       clock_initialize was setting up the alarm IRQ
       up_initalize is initializing the NVIC.

       This most likely worked in the past due to a bug in the
       NVIC init code that failed to clear the Interrupt enables.
       That was fixed in 510b0f7e arch/arm/src: Correct all ARMv7-M
       architectures.  Interrupts were not be disabled correctly
       on power up.

* stm32h7:Ported over F7 RTC

* nucleo-h743zi:Add RTC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-17 14:01:28 +00:00
Gregory Nutt
4383ef6787 boards/README.txt: Update for changes to the organization of the boards/ directory. 2019-08-16 18:26:33 -06:00
Alin Jerpelea
210de35cb5 Merged in alinjerpelea/nuttx (pull request #999) 
arm: sam & tiva: codestyle fixes

* arm: samd2l2: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: samd5e5: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: samv7: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: tiva: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-16 13:40:59 +00:00
Gregory Nutt
b0b33584ff boards/arm/s32k1xx/s32k118evb/src/s32k118_clockconfig.c: Add clock configuration data for the S32K118EVB. 2019-08-15 16:56:57 -06:00
Gregory Nutt
fba40c40f1 arch/arm/src/s32k1xx/s32k1xx_clockconfig.h: Add data structures that will eventually be used to configure clocking. 2019-08-15 14:03:02 -06:00
Alin Jerpelea
061728b440 Merged in alinjerpelea/nuttx (pull request #996) 
arm: sam34: codestyle fixes

* arm: sam34: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: sama5: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-15 16:19:17 +00:00
Gregory Nutt
eb4fff5221 Minor updates from review of last PR. 2019-08-15 10:05:21 -06:00
Gregory Nutt
17a4efe031 boards/arm/s32k1xx/s32k118evb: More build fixes. 2019-08-14 13:31:21 -06:00
Gregory Nutt
963031f42c arch/arm/src/s32k1xx: A few fixes. The build progresses further but still fails. 2019-08-14 12:40:51 -06:00
Gregory Nutt
8987a9e374 This commit adds initial board support for the NXP S32K118EVB. This configuration is intended, initially, to support development of the architecture support. This is VERY much a work in progress and you should not use this configuration unless you are interested in assisting with the bring-up. 
Squashed commit of the following:

    boards/arm/s32k1xx/s32k118evb/configs/nsh:  Add a basic NSH configuration.
    boards/arm/s32k1xx/s32k118evb/scripts:  Add linker scripts and Make.defs.
    configs/:  Hook the S32K118EVB board into the configuration system.
    boards/arm/s32k1xx/s32k118evb:  Add initial support for the NXP S32K118EVB.
 2019-08-14 08:47:35 -06:00
Alin Jerpelea
0dc41ff4ba Merged in alinjerpelea/nuttx (pull request #993) 
arm: codestyle fixes 4

* arm: max326xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: moxart: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: nrf52: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: nuc1xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: xmc4: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: tms570: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: str71x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-14 14:43:29 +00:00
Alin Jerpelea
de47c8f52f Merged in alinjerpelea/nuttx (pull request #992) 
arm: codestyle fixes 3

* arm: lpc214x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc2378: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc31xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc54xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc43xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-14 12:34:18 +00:00
Alin Jerpelea
907d6b085b Merged in alinjerpelea/nuttx (pull request #991) 
arm: codestyle fixes 2

* arm: kl: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lc823450: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc17xx_40xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-13 16:08:49 +00:00
Nathan Hartman
0b501304c7 boards/arm/timva/tm4c123g-launchpad: Update paths for boards/ restructuring. Update paths to board directories in documentation and scripts. 2019-08-12 12:16:40 -06:00
Alin Jerpelea
f362d161db Merged in alinjerpelea/nuttx (pull request #990) 
arm: codestyle fixes 1

* arm: a1x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: am335x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: c5471: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: cxd56xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: dm320: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: efm32: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: imx6: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: imxrt: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: kinetis: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-12 16:06:40 +00:00
Manuel Stühn
5585cc421c Merged in manuelstuehn/nuttx/feature/bsd-portable (pull request #975) 
change all occurences of /bin/(ba)sh to /usr/bin/env bash which appears more portable

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-10 15:57:26 +00:00
raiden00pl
5ed743d58a Merged in raiden00/nuttx_f334 (pull request #974) 
Master

* Revert "Merged in yanqil-br/feature-multi_chan_pwm (pull request #973)"

    This reverts commit aef0e0b538.

* arch/arm/src/{stm32/stm32f7/stm32h7/stm32l4}/stm32_pwm.c: configure multi-channel duty only if channel specified. This allows you to update duty cycle for a single channel

* nucleo-f303re/configs: add basic NSH configuration

* nucleo-f303re/configs/pwm: enable console on UART2 and set entry point to nsh_main

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-10 15:14:19 +00:00
Nathan Hartman
29a3412407 boards/arm/efm32/olimex-efm32g880f128-stk/src/.gitignore: Restore .gitignore file that was lost in the boards/ directory reorganization. 2019-08-09 11:11:20 -06:00
Alin Jerpelea
a06033df64 Merged in alinjerpelea/nuttx (pull request #971) 
codestyle fixes

* misoc: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risc-v: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: codestyle fixes

     After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-09 13:22:39 +00:00
Gregory Nutt
8f3e024ef7 boards/arm/lpc17xx_40xx/u-blox-c027/configs/nsh/defconfig: Remove stray character in defconfig file. 2019-08-08 10:13:55 -06:00
Alin Jerpelea
66565a69a7 Merged in alinjerpelea/nuttx (pull request #969) 
avr: hc: mips: codestyle fixes

* avr: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-08 14:53:04 +00:00
Gregory Nutt
eaaa73198b boards/Board.mk: Correct a simulator included path problem introduced by reorganization of arch/sim/src. 2019-08-08 07:17:43 -06:00
Gregory Nutt
ad122066ea defconfigs: All paths assigned to CONFIG_PASS1_BUILDIR must include the chip name. 2019-08-07 18:17:43 -06:00
Gregory Nutt
8ecb72ded6 Add defconfig files must include CONFIG_ARCH_CHIP= to break and chicken-and-egg problem. 2019-08-07 15:37:35 -06:00
Alin Jerpelea
1358e829ad Merged in alinjerpelea/nuttx (pull request #967) 
group boards based on chip

* a1x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* am335x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* scx56xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dm320: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imx6: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kinetis: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kl: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc17xx_40xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc214x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc2378: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc31xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc43xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc54xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max326xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxart: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nuc1xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam34: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd2l2: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd5e5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f0l0g0: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32h7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* str71x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tiva: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: typo fix

    this boars is a z80 board and was moved to the wrong arch

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at32uc3: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at90usb: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: atmega: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: mcs92s12ne64: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mz: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: lm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: mor1kx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: m32262f8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: sh7032: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: gap8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: nr5m100: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: sim: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: qemu: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: esp32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: z16f2811: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: ez80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z180: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: update tools for boards based on chip

    This patch updates only the linux tools

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl25z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl26z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcb1700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-evb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same71-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-1152re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzou: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f071rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c123g-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c1294-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: typo fix

    add missing tools/oocd.sh

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-07 20:49:39 +00:00
Gregory Nutt
c92da140eb boards/arm: Update patches to linker scripts in kernel/Makefile files. 2019-08-06 12:09:04 -06:00
Gregory Nutt
207e5072ef defconfigs: pathes assigned to CONFIG_PASS1_BUILDIR must now include the architecture. 2019-08-06 11:06:28 -06:00
Alin Jerpelea
af28821c77 Merged in alinjerpelea/nuttx (pull request #966) 
group boards by architecture

* z80: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risc-v: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: group boards by architecture

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-06 14:37:27 +00:00
Gregory Nutt
721994846c tools/: Change preferred argument of configurations tools to use ':' as the delimiter between <board-name> and <config-name>. This is to emphasize that this is not a path; it is configuration specification. 
The legacy '/' delimiter is still supported but not recommend and not advertised.

Squashed commit of the following:

    Update configurations instructions in more README.txt files to show ':' delimiter vs '/' delimiter.
    Update configurations instructions in various README.txt file to show ':' delimiter vs '/' delimiter.
    tools:  Update all configuration-related tools to accept ':' separator between board and configuration name.
 2019-08-05 16:55:51 -06:00
Gregory Nutt
cb1672a05a boards/: Fix more comments related to the reorganization of the board configuration directories. 2019-08-05 10:48:10 -06:00
Gregory Nutt
e12c133a53 Change references to boards/<board>/<config> to boards/<board>/configs/<config> in comments, Documentation, URLs. 2019-08-05 10:16:02 -06:00
Alin Jerpelea
31e87abd1c Merged in alinjerpelea/nuttx (pull request #964) 
move board configs to configs folder

* amber: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr32dev1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* demo9s12ne64: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* esp32-core: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200kitg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ez80f910200zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-pic32mz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k125z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k126z: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* gapuino: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450-xgevk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4357-evb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* makerlisp: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbc1700: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* micropendous3: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mirtoo: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moteino-mega: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ne64badge: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nr5m100-nexys4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-g071rb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l152re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l452re: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimexino-stm32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mx7mmb: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pic32mz-starterkit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* qemu-i486: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv71-xult: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzhou: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* skp16c26: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f769i-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sure-pic32mx: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-2.0: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c123g-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tm4c1294-launchpad: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ubw32: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* us7032evb1: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16f2800100zcog: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80sim: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8encore000zco: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z8f64200100kit: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: move board configs to configs folder

    This is a cleanup that will move all configs from the board folder to
    a board/configs folder

    NOTE:
    The configure.sh script must be used with the new path <board-name>/configs/<config-name>

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.sh: adjust the script to use boards/configs folder

    Script update to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: configure.bat: adjust the script to use boards/configs folder

    Now we update the script to pick the configs from the new configuration folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-05 14:30:34 +00:00
Gregory Nutt
e0205ff3cc More changes on name configs/ to boards/ in comments, Documentation, Tools, etc. That is all that I see for now. 2019-08-05 07:24:57 -06:00
Gregory Nutt
615c0ea7ee Change naming configs/ to boards in comments, Documentation, etc. Still a few more to go. 2019-08-05 07:13:48 -06:00
Alin Jerpelea
a1c991d921 Merged in alinjerpelea/nuttx (pull request #963) 
Move boards to boards folder

* boards: rename configs folder to boards

    This is the proposed layout after the change:

    boards: - folder containing board folders
            <board>: - name of each board
                    drivers: - extra drivers specific for platform
                    include: - header files for the boars
                    scripts: - extra scripts specific for platform
                        src: - board specific code
                      tools: - extra tools specific for platform
                    <config>: - board specific configuration(s)

    Note:
    <xxx> names are dependent on platform

    This is a logical change to aim to the arch layout but this is a
    huge change it should be done in several steps to lower the risk.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Kconfig: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile.*: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Make.defs: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .sh: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .mk: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .c & .h: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .bat: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-08-05 12:04:14 +00:00