Commit Graph

19 Commits

Author SHA1 Message Date
Xiang Xiao
443255f348 Unify the c++ standard library name to libxx (#19)
libs/libxx/Makefile, and tools/*.mk:  Use common library name libxx.a, regardless of which libc++ library is selected.
2019-12-31 10:28:48 -06:00
Gregory Nutt
d87295f328 tools/Directories.mk, Makefile.*: Extend the clean_context target so that it will remove the autogenerated files created during the context phase of the initial build. 2019-12-03 06:38:53 -06:00
Guiding Li
8b92305265 This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.

Squashed commit of the following:

Author: Xiang Xiao <xiaoxiang@pinecone.net>
    include/nuttx/b2c.h and libx/libc/string:  Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.

Author: Gregory Nutt <gnutt@nuttx.org>
    Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
    Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).

Author: Xiang Xiao <xiaoxiang@xiaomi.com>
    tools/:  Fix the minor issue in Makefile

Author: Gregory Nutt <gnutt@nuttx.org>
    drivers/rptun/rptun.c:  Review for coding standard.  Run against tools/nxstyle.
    tools/LibTargets.mk:  Fix some TABs that were turned into spaces by a copy-paste.
    fs/hostfs:  Add configure and build support for hostfs RPC.
    drivers/timer:  Add configure and build support for syslog RTC.
    drivers/syslog:  Add configure and build support for syslog RPC.
    drivers/serial:  Add configure and build support for serial RPC.
    Kconfig, tools/*.mk. openamp/:  Add basic OpenAMP build support.
    drivers/rptun:  Add configure and build support for OpenAMP tunnel drivers.
    drivers/net:  Update Make.defs and Kconfig for OpenSDA support.
    Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c.  These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux.  Removed because we want to separate the activities.  We will just try to get the basic OpenAMP support in place for now.
    Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h.  These are specific to the Xiaomi application.

Author: zhuyanlin <zhuyanlin@pinecone.net>
    This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx.  Initial commit is source files only.  Additional changes to Kconfig and Make.defs files still needed.

Author: Jianli Dong <dongjianli@pinecone.net>
    This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx.  Initial commit is source files only.  Additional changes to Kconfig and Make.defs files still needed.

Author: Guiding Li <liguiding@pinecone.net>
    This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx.  Initial commit is source files only.  Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 11:30:33 -06:00
Xiang Xiao
0efd3e2e7f tools/Directories.mk: Remove FSDIRS/NOFSDIRS related logic/comments since the file system can no longer be disabled now. 2019-09-30 07:11:26 -06:00
Xiang Xiao
8e74365b96 ibs/libc, libs/symtab, tools/ build system: Move symbol table generation into libc since the address in symbol table should come from userspace binary for protect build, not kernel binary. 2019-09-28 11:14:48 -06:00
Gregory Nutt
65aabe3048 libs/symtab: move symtab/ to libs/symtab. Let's no clutter up the top level directory. Shorten CONFIG_EXECFUNCS_GENERATE_SYSTEM_SYSTAB to just CONFIG_EXECFUNCS_SYSTEM_SYMTAB. Some items in syscall/syscall.csv are only valid when CONFIG_LIB_SYSCALL is defined. That is always defined when really building the syatem calls, but causes errors in libs/symtab because they are not valid in the normal, FLAT build context. 2019-08-25 19:28:04 -06:00
Pavel Pisa
380198c985 symtab/, tools/: NuttX provides lists of available syscalls and library functions and tools to process them. The lists can be used to build symbol table which allows runtime program loading which can reuse functions already compiled into NuttX system image. List processing, compilation and linking to the final system image has been possible only under manual control until now.
Provided changes add option (CONFIG_EXECFUNCS_GENERATE_SYSTEM_SYMTAB) to build complete list of available functions and syscalls automatically.  The symbolic table is generated in form libsymtab.a which can be reused by application or directly pull in when "g_symtab" and "g_nsymbols" variables are requested by EXECFUNCS configuration.

I have tried to follow mechanisms for library compilation in different kernel protection modes but tested only flat no-MMU build. The basic assumption is that this library and libraries providing syscall stubs and C-library functions are available in user-space context and initial application (usually NSH) registers the symbol table through IOCTL.  The table can be reused then by another applications in their address space as kernel allows. Simple for flat or protected mode, I am not sure if really support in MMU mode. It is highly probable that I have made some mistake, overlooked something, but functionality is optional (should not cause troubles in any mode if disabled) and main purpose is to lower memory overhead when more applications are loaded on memory constrained system which usually use direct kernel calling without protection or address space separation. If the table should be provided by kernel to applications then makefiles has to be adjusted.
2019-08-13 09:09:43 -06:00
Alin Jerpelea
a1c991d921 Merged in alinjerpelea/nuttx (pull request #963)
Move boards to boards folder

* boards: rename configs folder to boards

    This is the proposed layout after the change:

    boards: - folder containing board folders
            <board>: - name of each board
                    drivers: - extra drivers specific for platform
                    include: - header files for the boars
                    scripts: - extra scripts specific for platform
                        src: - board specific code
                      tools: - extra tools specific for platform
                    <config>: - board specific configuration(s)

    Note:
    <xxx> names are dependent on platform

    This is a logical change to aim to the arch layout but this is a
    huge change it should be done in several steps to lower the risk.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Kconfig: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile.*: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Make.defs: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .sh: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .mk: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .c & .h: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .bat: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 12:04:14 +00:00
Gregory Nutt
dbf286472b Squashed commit of the following:
video/edid:  Add some initial EDID logic ported from FreeBSD.
    video/:  Add basic configure and build support for a video subsystem.
2019-07-07 16:40:24 -06:00
Gregory Nutt
a64869aa67 CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense.
Squashed commit of the following:

    configs/:  The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
    fs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    tools/:  Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
    syscall/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    libs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    include/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    drivers/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    Documentation/:  Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
    binfmt/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    arch/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    net/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/Kconfig:  CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
    configs/:  Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 12:09:26 -06:00
Anthony Merlino
c21dfbb93c Merged in antmerlino/nuttx/libcxx-build-fix (pull request #727)
Fixes issue with libcxx build. This was changed multiple times, but should be fixed now.

Approved-by: GregoryN <gnutt@nuttx.org>
2018-09-25 20:46:02 +00:00
Gregory Nutt
a04d2eeb10 tools/Directories.mk: Correct the path to the installed libcxx directory. 2018-09-13 14:03:09 -06:00
Gregory Nutt
2b6dd99c2e Revert "Merged in antmerlino/nuttx/fix-libcxx-build-warning (pull request #719)"
This reverts commit 57e5142b98.
2018-09-13 13:59:28 -06:00
Anthony Merlino
57e5142b98 Merged in antmerlino/nuttx/fix-libcxx-build-warning (pull request #719)
Fixes build error. libcxx moved into libs/libxx/libcxx

Approved-by: GregoryN <gnutt@nuttx.org>
2018-09-12 21:38:08 +00:00
Gregory Nutt
ddaea5dabc Revise commit cce9ae94f4: The pass1/ directly only needs to be added to the directories to be cleaned. That would be OTHERDIRS vs. NONFSFIRS. Also remove old reference to the defunct lib directory (now the staging directory). 2018-09-08 08:28:02 -06:00
Gregory Nutt
cce9ae94f4 tools/Directories.mk: The pass1 directory was not being cleaned on 'make distclean' 2018-09-08 08:11:38 -06:00
Mateusz Szafoni
b5ec5349b0 Merged in raiden00/nuttx (pull request #648)
libdsp: initial commit

* libdsp: initial commit

* libdsp: cosmetics

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-30 12:36:06 +00:00
Gregory Nutt
cf99fb40c9 This commit moves all of the libraries under a common directory called libs/. This most certainly break libcxx and uClibc++ for now.
Squashed commit of the following:

    libs/libxx:  Fix some confusing in naming.  If the directory is called libxx, then the library must be libxx.a (unless perhaps LIBCXX is selected).
    libs/:  Fix paths in moved library directories.
    libs:  Brute force move of libc, libnx, and libxx to libs.  Cannot yet build it in that configuration.
2018-05-29 13:21:26 -06:00
Gregory Nutt
53a4408428 Build system: Move all build-related files (except the top-level Makefile) into the tools/ sub-directory. This really cleans up the top-level directory. 2018-05-29 12:14:55 -06:00