__revoke_low_memory() is called in intel64_lowsetup()
fixes b4b96a6435 (PR #11758) in which the multiboot2 header was accessed
after revoking the low memory which caused page fault.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
BSS nulling can now be optimized by the compiler, so it is necessary
to enable SSE instructions early in __nxstart
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Define `NUTTX_DEFCONFIG` and `NUTTX_BOARD_ABS_DIR` instead of `BOARD_CONFIG`
when reconfiguring a custom configuration,
because ${BOARD_CONFIG} uses a relative path,
it will cause the following error:
CMake Error at CMakeLists.txt:134 (message)
No config file found at
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
DEBUG_FULLOPT enables many x86 related optimizations which can
be broken in many ways (eg. not aligned stack).
With this change it's easier to catch changes that breaks x86_64.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Align _ebss to 16, otherwise g_idle_topstack is not correctly aligned.
For some reason the previous alignment worked with make buit but in case
of cmake with optimization enabled, the IDLE stack was misaligned which
caused vector instruction misalignment exception.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The stack pointer must be aligned to 16 bytes, otherwise the system crash on the first unaligned data access with vector instruction.
The problem is only observable with optimization enabled, when vector instructions are generated.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
this is a follow up to the change from 2335b69120 which missed
updating stack frame length for this memset
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Fix minor problems when reading codes:
- icmpv6_autoconfig: Call net_unlock before return
- pkt_sendmsg: Return error for types other than SOCK_RAW
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This patch update documents to reflect the fact that remote node is kicked
off by master node. It also adds debug dump to aid the MISA reading issue
investigation.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
During removal of F1 related stuff, code that configures FLASH
latency was removed, which rendered some of the F3 line unbootable.
It was done by mistake, since previous removed block was
'#ifdef VALUE_LINE', and block with FLASH code was '#ifndef VALUE_LINE'
and so it should not have been removed.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Add support for tricore TC397
1. Porting based on AURIX TC397 KIT_A2G_TC397_5V_TFT evaluation board
https://www.infineon.com/cms/en/product/evaluation-boards/kit_a2g_tc397_5v_tft/
2. In order to avoid license and coding style issues, The chip-level code
still uses the implementation of AURIX Development Studio SDK.
The SDK package will be downloaded as a third-party package during compilation:
https://github.com/anchao/tc397_sdk
3. Single core only, SMP implementation will be provided in the future.
4. Implemented the basic System Timer, ASCLIN UART driver.
5. Only the Tasking tool chain is supported (ctc/ltc, license maybe required)
6. 'ostest' can be completed on the TC397 development board.
How to run?
1. Setup the tasking toolchain and license
$ export TSK_LICENSE_KEY_SW160800=d22f-7473-ff5d-1b70
$ export TSK_LICENSE_SERVER=192.168.36.12:9090
2. Build nuttx ELF
$ ./tools/configure.sh tc397/nsh
$ make -j
...
artc I800: creating archive libc_fpu.a
LD: nuttx
3. Switch to windows PC, setup AURIX-studio to Debugger Launcher
4. Replace runing ELF to nuttx, and re-download ELF
Signed-off-by: chao an <anchao@lixiang.com>
In the previous patch, we moved rptun_panic and rptun_dump_all in rptun to rpmsg.
In order to ensure CI pass, this two API in rptun is not removed. So we remove rptun_panic and rptun_dump_all in this patch.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
When we close a socket fd, it will call get path on sockets.
`close(socket_fd)` -> `file_closelk(filep)` -> `file_fcntl(F_GETPATH)`
It causes a heavy stack load for each socket close operation.
(We have `GETPATH` for sockets to be used for `fdinfo`)
But the socket fds are not intended to be used for file locks.
And so do some other file types, so we may just limit the usage of flock.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
These variables will trigger variable 'ret' set but not used warnings due to different configurations.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
The implementation of assert in linux is as follows:
define assert(expr) (__ASSERT_VOID_CAST (0))
After defining NDEBUG in sqlite, some variables will be undefined,
and referencing variables in assert will cause compilation errors.
sqlite3.c:28729:23: error: ‘mutexIsInit’ undeclared (first use in this function)
28729 | assert( GLOBAL(int, mutexIsInit) );
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
According to the standard definition, assert should return a void expression
https://pubs.opengroup.org/onlinepubs/007904875/basedefs/assert.h.html
This patch involves two changes:
If you define the NDEBUG macro, assert does not use any parameters and directly returns a void expression.
assert should return a void expression and cannot use do-while statements.
If the following code , a compilation error will occur.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This patch adds inter-processor interrupt support using K230 mailbox
device to improve the RPMsg efficiency. The polling logic has been
dropped.
Major changes:
- in arch/risc-v/include/k230:
- irq.h add IRQ for IPI devices
- in arch/risc-v/src/k230:
- Kconfig add IPI related config, increase polling delay
- Make.defs add k230_ipi.c to CHIP_SRCS
- k230_hart.c fix typo, add notes of zero MISA reading w/ NUTTSBI
- k230_irq.c use K230_PLIC_IRQS as ext IRQ limit to support IPI
- k230_rptun.c use IPI instead of polling
- in boards/risc-v/k230/canmv230/configs
- master enable IPI support
- remote enable IPI, TMPFS, RPMSGFS etc
New additions:
- in arch/risc-v/src/k230:
- k230_ipi.h add K230 IPI related defintions
- k230_ipi.c add K230 IPI driver
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
