sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6,807 Commits 1 Branch 0 Tags 291 MiB
39fcfa0c44
Commit Graph

951 Commits

Author SHA1 Message Date
Gregory Nutt
9a9fc90794 SAMA5 UDPHS: Dont' reject read request submissions while stalled. That causes an infinite loop. When stalling, cancel all pending write requests, but cancel only a reqd request if it is in progress. It will be immediately requeued 2013-09-24 15:06:17 -06:00
Gregory Nutt
368867f06e ENCx24J600 UDP backlog support from Maz Holtzberg 2013-09-24 09:03:16 -06:00
Gregory Nutt
773a693ee2 Cosmetic changes to comments and coding style fixes 2013-09-22 14:48:22 -06:00
Gregory Nutt
cf5cf0da72 SAMA5D3x-EK AT25 Serial FLASH: Dropping SPI frequency to 10MHz gives more reliable behavior 2013-09-22 12:22:55 -06:00
Gregory Nutt
f22e60c392 Use a valid interval for the interrupt endpoint in the CDC/ACM driver 2013-09-22 11:35:44 -06:00
Gregory Nutt
5b17e9da79 Cosmetic changes to USB host class driver files 2013-09-21 12:19:12 -06:00
Gregory Nutt
60bd791dec SAMA5 + HID Keyboard. Fixes to initialize the HID keyboard class 2013-09-20 15:23:00 -06:00
Gregory Nutt
5d0131fc73 Names of some USB device definitions changed to avoid collisions 2013-09-20 10:00:30 -06:00
Gregory Nutt
72340b85fe Add support for multiple PHY selections for multiple Ethernet MAC drivers 2013-09-17 10:52:23 -06:00
Gregory Nutt
b3018d8bf0 Add support for the AT 24C512 EEPROM 2013-09-12 09:44:38 -06:00
Gregory Nutt
349677aaf9 Fix a reference counting error in the USB host mass storage class 2013-09-10 11:38:40 -06:00
Gregory Nutt
89c829d1ae SAMA5 EHCI: Did not work with DEBUG off. Appears to be because of some D-Cache flushing that was performed only with DEBUG ON. Now is unconditional 2013-09-10 10:12:51 -06:00
Gregory Nutt
c6bf25bca0 Extent the the USB host trace logic to include verbose debug output 2013-09-09 17:27:21 -06:00
Gregory Nutt
3ba64b0cfe USB monitor extended so that it can also be used with USB host trace data 2013-09-09 15:02:33 -06:00
Gregory Nutt
fbd5ab0758 Beginning of support for USB host side tracing 2013-09-09 14:01:52 -06:00
Gregory Nutt
a992004b0e USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors 2013-09-09 10:00:16 -06:00
Gregory Nutt
40f84dfa19 Trivial updates assocaited with USB host mass storage and SAMA5 EHCI 2013-09-08 13:42:56 -06:00
Gregory Nutt
9a9de5de81 Fix warnings in USB MSC when compiled for a high speed device; also fix USB MSC default VID/PID configuration 2013-09-07 10:12:02 -06:00
Gregory Nutt
0585cd5692 Extend USB trace logic. When we are configured to decode and stringify trace data, de-stringification support is not included for class driver trace output 2013-09-06 17:24:02 -06:00
Gregory Nutt
b95886626e Back-port some bugfixes from the ENCX24J600 to the ENC28J60 driver (unverified). From Max Holtzberg 2013-09-06 13:17:12 -06:00
Gregory Nutt
8912bcb1ea SAMA5D3x-EK: Add support for USB MSC device on AT25 serial flash 2013-09-06 13:07:29 -06:00
Gregory Nutt
fb37248343 CDC/ACM and PL2303 device drivers: Don't use the max packet size assigned to an endpoint in order to determine the request buffer size. The endpoint has not yet been configured that max packet size may be wrong. 2013-09-05 18:00:16 -06:00
Gregory Nutt
ce6368793a Some restructing of the CC3000 build 2013-09-04 16:40:57 -06:00
Gregory Nutt
64f1c78367 CC3000 driver updates from Alan Carvalho de Assis 2013-09-04 09:45:59 -06:00
Gregory Nutt
29d4748b1b Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis 2013-09-03 14:59:48 -06:00
Gregory Nutt
c162cca9e8 SAMA5 UDPHS: Some very early debug corrections. Not yet working. 2013-09-02 12:26:15 -06:00
Gregory Nutt
67a126a5dc Misc USB device changes reated to SAMA5, trace support, and USB monitoring 2013-09-01 11:52:21 -06:00
Gregory Nutt
ac130dc2f3 CDC/ACM Device: Fixe compilation errors when dual speed support is enabled 2013-09-01 11:27:59 -06:00
Gregory Nutt
a3af5b3aaf SAMA5 OHCI+EHCI: Using cp15_clean instead of cp15_coherent; EHCI: Need to set alt pointer in order to handle short transfers. 2013-08-27 13:07:21 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
12beaf4b1a Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size 2013-08-26 15:46:16 -06:00
Gregory Nutt
463c40c42e ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg 2013-08-26 09:11:58 -06:00
Gregory Nutt
70be601ea2 Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg 2013-08-25 11:21:54 -06:00
Gregory Nutt
e5208a6e92 ENC28J60 errors reported by Max Holtzberg 2013-08-21 08:10:32 -06:00
Gregory Nutt
19d7c90d4e USB host: Add device address management support in preparation for USB hub support 2013-08-18 14:31:57 -06:00
Gregory Nutt
a65ac5bc72 Back out most of the changes of 3b04d08043742b9e65cf38d45988b35bff91daed 2013-08-13 14:12:27 -06:00
Gregory Nutt
b575450a04 Separate SAMA5 OHCI interrupt handling into separate functions 2013-08-13 13:34:35 -06:00
Gregory Nutt
120a3604c9 More changes to USB host interface to support multiple downstream ports 2013-08-12 16:29:33 -06:00
Gregory Nutt
ed49812d2c Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
dd3c682443 SAMA5: Some improvements to the HSCMI card removal/insertion logic 2013-08-11 11:13:11 -06:00
Gregory Nutt
0f20d4581b Added FIONREAD and FIONWRITE to CDC/ACM driver. From Lorenz Meier 2013-08-10 19:21:39 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
97e13b33ab MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier 2013-08-10 18:29:22 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
628f50ba61 SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers 2013-08-09 13:12:16 -06:00
Gregory Nutt
ce9eb71495 SAMA5: A few early, easy bug fixes. The rest will all be difficult 2013-08-06 11:29:53 -06:00
Gregory Nutt
cbe8c5ed56 SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH 2013-08-05 08:24:39 -06:00
Gregory Nutt
906506c61c SAMA5D3x-EK: At support for the AT25 serial FLASH 2013-08-04 16:56:41 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
c6b141d190 Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao 2013-07-09 07:59:28 -06:00
Gregory Nutt
37ed44a1ee Fix type in the USB composite device driver 2013-07-04 07:47:32 -06:00
Gregory Nutt
0ff5a0c791 Correct port direction for Arduino MISO signal 2013-07-02 12:37:20 -06:00
Gregory Nutt
cfb156f286 Add support for touchscreen on ITEAD Arduino shield. Untested 2013-07-02 08:25:53 -06:00
Gregory Nutt
bdf96a93db Revise how delays are calculated in SPI bit bang driver so that we may get a little better frequency resolution 2013-07-01 20:55:36 -06:00
Gregory Nutt
652c33a53a clean up of SPI bit bang logic 2013-07-01 17:49:43 -06:00
Gregory Nutt
e1dab23711 Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield 2013-07-01 16:50:16 -06:00
Gregory Nutt
8b68ea2f94 Add a general bit-bang SPI upper-half driver 2013-07-01 12:23:26 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
3d975e0a08 Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes 2013-06-24 12:37:02 -06:00
Gregory Nutt
d971650440 Fix UG-2832HSWEG04 configuration values 2013-06-23 15:17:22 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
a60e38e13a Fix error in MMC/SD SPI driver introduced with some recent changes; Update TODO list 2013-06-23 10:45:37 -06:00
Gregory Nutt
b41c96e1f8 Beginning debug of SAM4L Xplained SLCD 2013-06-22 17:01:44 -06:00
Gregory Nutt
d7ec0089a7 Fix for ENC28J60 from Dave 2013-06-22 08:55:16 -06:00
Gregory Nutt
161af4bf33 MMC/SD SPI speed field is only used if CONFIG_SPI_OWNBUS is not defined 2013-06-17 18:27:25 -06:00
Gregory Nutt
b9ad057972 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
Gregory Nutt
c9f1d1857c SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
c7fd7a4e27 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
dd2983e26a SAM MMCSD/SPI related changes 2013-06-15 17:00:52 -06:00
Gregory Nutt
9cf942bcb2 SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away 2013-06-13 16:18:25 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
0e37ec1bfc Add NSRF42L01 driver. From Laurent Latil 2013-06-01 08:03:55 -06:00
Gregory Nutt
4748599a43 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
47bbf54f11 Optimize request buffer sizes in the serial USB drivers so that we avoid so many NULL packets and so that the OUT request buffer size is exactly the max packet size. 2013-05-29 12:30:37 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
f2cb0540a5 Verified the sure-pic32mx/usbnsh configuration 2013-05-27 14:10:34 -06:00
Gregory Nutt
b97a816998 The SLCD driver is now fully functional for Sure PIC32MX board 2013-05-27 11:39:13 -06:00
Gregory Nutt
157789e373 Rename SLCD geometry tructure to attributes; Move MAX contrast to attributes. Add attribute and ioctl commands to get and set SLCD brightness 2013-05-27 07:26:59 -06:00
Gregory Nutt
a3c1949963 Converted configs/pcblogic-pic32mx configurations to use kconfig-frontends. Re-organization of files in configs/pcblogic-pic32mx/src 2013-05-25 11:53:49 -06:00
Gregory Nutt
afa905fc15 Audio subystem update from Ken Pettit. Plus moved some header files 2013-05-21 13:13:05 -06:00
Gregory Nutt
5b86207177 Add audio/ sub-syste, include/nuttx/audio.h interface, and drivers/audio/vs1053.c driver to NuttX. From Ken Pettit 2013-05-19 15:12:28 -06:00
Gregory Nutt
b80707ea78 Add support for R61505U LCD controller on HY-mini STM32v board 2013-05-16 14:06:16 -06:00
Gregory Nutt
88c0911fb1 Various changes and bigfixes for problems detected by CppCheck 2013-05-09 14:23:34 -06:00
Gregory Nutt
84b2c77a63 configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit 2013-05-07 14:34:09 -06:00
Gregory Nutt
337680e346 mio283qt2.c: Need select/deselect LCD in setpower method; hwinitialize did not deselect LCD 2013-05-06 08:34:53 -06:00
Gregory Nutt
345c592258 Fixed to M25P driver from Ken Pettit plus some documentation updates 2013-05-03 17:17:14 -06:00
Gregory Nutt
8757465df2 Replace CONFIG_MTD_SMART in MTD drivers with other conditions 2013-05-03 14:32:08 -06:00
Gregory Nutt
72179b7773 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
4f15d37b62 Add support for the byte write method to MTD partition logic; Beef up the MTD partition test -- and fix resulting bugs detected 2013-05-02 08:07:42 -06:00
Gregory Nutt
9ead6cadff Fix typo in configuration variables: MP25P should M25P 2013-05-01 12:04:39 -06:00
Gregory Nutt
1099eabe3d Cosmetic update to comments 2013-05-01 11:42:36 -06:00
Gregory Nutt
99c2cfc168 Add an optional byte-oriented write method to the MTD interface 2013-05-01 10:59:57 -06:00
Gregory Nutt
ba52f8d3ec Misc changes for clean built od mikroe-stm32f4 configurations 2013-05-01 09:21:13 -06:00
Gregory Nutt
25d5706ca3 SMART block driver plus changes to M25P and RAM drivers needed for SMART support 2013-04-30 19:10:54 -06:00
Gregory Nutt
5d4af79ea0 Incorporate comments from Ken Petit 2013-04-30 17:02:34 -06:00
Gregory Nutt
f9be47ead2 Add configuration and example to test MTD partitions 2013-04-30 15:54:02 -06:00
Gregory Nutt
4d4ece78af Add MTD partition support plus fix some typos in comments 2013-04-30 12:37:34 -06:00
Gregory Nutt
420ca1b256 configs/freedom-kl25z: Change references to NuTiny to Freedom KL25Z 2013-04-25 20:09:15 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
Gregory Nutt
f9b9875952 Various Kconfig files still have references to CONFIG_ variables. Some in harmless comments, some in config definionts which is not harmless. All removed 2013-04-25 15:52:00 -06:00
Gregory Nutt
37da13321c kconfig2html: Perform HTL conversions and add hyperlinks for dependency expressions 2013-04-21 11:01:46 -06:00
Gregory Nutt
3f52b0fbb6 Yet more kconfg2html logic 2013-04-20 17:29:10 -06:00
Gregory Nutt
fc4c714523 Add support for the FM25V01 part 2013-04-18 16:12:37 -06:00
Gregory Nutt
3e6b7a33f2 Fix some naming and comments associated with the Open1788 touchscreen 2013-04-15 11:25:08 -06:00
Gregory Nutt
ad2ebf1dd8 Convert olimex-lpc17stk configuration to use the kconfig-frontends tools; Fix some compile errors in the pl2303 USB device driver 2013-04-12 08:38:52 -06:00
Gregory Nutt
b841dac0be Minor clean-up while debugging the Open1788 touchscreen 2013-04-12 08:37:20 -06:00
Gregory Nutt
db78b76102 Mostly updates and corrections to .gitignore files 2013-04-04 15:39:50 -06:00
Gregory Nutt
23db0682b7 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
e1daee1930 Several fixes for LPC1788 GPIO 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5813 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 19:35:21 +00:00
patacongo
e1e8f4debe SSP driver fixes for the LPC178x; Fixes for Open1788 touchscreen driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5812 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-02 16:36:19 +00:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
d9992b32c7 LPC17 LCD driver is code complete and in need of testing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5788 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 20:06:53 +00:00
patacongo
ebf9960deb convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
f6206367fb More ST5767 LCD files missed in last commit 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5773 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 14:31:48 +00:00
patacongo
5e9fb81e0d Add an ST7567 LCD driver for ZKIT-ARM-1769 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5772 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-22 14:30:54 +00:00
patacongo
730dc3e202 Add missing implementation of O_NONBLOCK for serial writes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5755 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-18 16:04:29 +00:00
patacongo
18ca1965b6 AT91SAM3 now supports kernel-mode heap; SAM3U-EK knsh configuration converted to use kconfig-frontends tool 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5726 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 19:31:10 +00:00
patacongo
1ef904003e Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 15:32:33 +00:00
patacongo
1c52dce216 More changes for a kernel-mode allocator (more to be done) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-09 21:12:20 +00:00
patacongo
7d20a67179 Fixes to STM32 SPI, USB MSC class driver, and MMC/SD SPI driver from Petteri Aimonen 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5688 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-28 17:34:57 +00:00
patacongo
d621681866 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
2c9d402ad4 A few NuTiny-SDK-NUC120 fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5667 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-23 23:42:06 +00:00
patacongo
d932e56dca STM32 F4 patches from Petteri Aimonen (mostly USB) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5652 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-15 14:37:37 +00:00
patacongo
d43f284715 Missed SST39VF driver in commit 45640 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5642 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-12 00:52:52 +00:00
patacongo
69fd9e1415 Add a driver for the SST30VF NOR FLASH parts 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5640 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-11 21:44:00 +00:00
patacongo
ad447766ff Fix a readline bug. If a NUL is received, it would return end-of-file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5633 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-10 00:46:27 +00:00
patacongo
153984b9c9 Several patches from Petteri Aimonen 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5625 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-08 15:28:07 +00:00
patacongo
329328e5df New interface task_spawn(); exec_builtin() now uses task_spawn(); All argv types should be char * const * not const char ** 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5598 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 19:31:30 +00:00
patacongo
cf411bec51 A spurious checkin... I just want to improve some code structure 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5597 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 01:50:34 +00:00
patacongo
11aa231cf0 drivers/serial.c: Fix some race conditions. Some bad things code happen if we lost a USB connection at certain times. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5596 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 00:29:55 +00:00
patacongo
9a05ccdbbc Last minute 6.25 change 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5595 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-01 22:51:34 +00:00
patacongo
4587760eee Additional patches from Petteri Aimonen for FAT, STM32 SPI, and AT25 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5593 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-01 15:32:39 +00:00
patacongo
1b94639432 Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 23:29:34 +00:00
patacongo
bca9260b06 Missing calls to class SUSPEND/RESUME methods in all USB drivers 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5590 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 19:20:26 +00:00
patacongo
cdbbfaa464 Fix readline return value; Add support for removable serial devices 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5589 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 16:52:20 +00:00
patacongo
9b5d4a7b46 USB monitor daemon updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5579 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-29 13:30:10 +00:00
patacongo
ad430fc198 Add syslog.h; rename lib_rawprintf() to syslog() 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-28 21:55:16 +00:00
patacongo
a502d50e1e Updates for stm32f4discovery/usbnsh configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5574 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-28 01:44:45 +00:00
patacongo
68b11dc1ee Add configs/stm32f4discovery/usbnsh 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5572 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-27 19:17:56 +00:00
patacongo
4709eeb41a apps/examples/nettest and poll: Complete Kconfig files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5556 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-24 16:28:15 +00:00
patacongo
504dde5934 Beginning of support for LCD1602 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5545 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-21 22:46:37 +00:00
patacongo
2153fc40b5 LM3S OpenOCD configuration from Jose Pablo Carballo 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5544 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-21 16:56:29 +00:00
patacongo
29cdbe6143 Beginnings of definitions for the LPC1788; convert olimex-lpc1766stk to use kconfig-frontends 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5533 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-18 16:37:37 +00:00
patacongo
a5fbf66049 Don't build drivers/mtd unless CONFIG_MTD is defined (Denis Carikli) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5519 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-15 00:03:58 +00:00
patacongo
f6485fe177 Completes implementation of posix_spawn. Still untested and undocumented 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5504 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-10 17:37:29 +00:00
patacongo
8010efe1f5 Misc fixes for LM3S kconfig-frontends build 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5472 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-02 14:02:07 +00:00
patacongo
e7ae8fa5a6 Updates from Darcy Gong for UG-2864SWEG01 OLED 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5469 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-01 14:55:01 +00:00