A new locking mechanism: read/write locks
When there is a writer it is not possible to put on a read lock or a write lock; when there is a reader it is possible to reenter the read lock but not the write lock.
Writers are exclusive locks, readers are shared locks.
At the same time through the waiter count to determine whether there is currently a blocked task, if there is then in the unlock time to wake up all the waiter, through the priority of the competition to complete the blocked lock execution.
For example:
When we have a reader blocking two waiter writers, when the reader is unlocked it wakes up both writers. The writer with higher priority wakes up and checks for a successful condition and locks the lock, the second writer wakes up and fails to check for a condition and continues to block the lock.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
This moves all the public POSIX semaphore functions into libc and with
this most of the user-space logic is also moved; namely cancel point and
errno handling.
This also removes the need for the _SEM_XX macros used to differentiate
which API is used per user-/kernel mode. Such macros are henceforth
unnecessary.
If the semaphore is shared, the holder has put its own mmapped address
to pholder->sem. This means we must switch to the holder's address
environment when going through the held semaphores list.
A better option would be to get the kernel mapped address for the
semaphore's physical page, but that mechanism is not functional yet.
This fixes a full system crash when CONFIG_PRIORITY_INHERITANCE=y and
CONFIG_BUILD_KERNEL=y and user makes shared semaphore via:
int semfd = shm_open("sem", O_CREAT | O_RDWR, 0666);
sem_t *sem = mmap(0, sizeof(sem_t), PROT_READ | PROT_WRITE, MAP_SHARED, semfd, 0);
This path just for modify Mac sim-02 issue.
The compiler require the firt paramter of atomic_compare_exchange_strong
is atomic type and second parameter is int type.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
spinlock.c:
Implement read write spinlock.
Readers can take lock simultaneously but only one writer can take lock.
irq_spinlock.c:
Align g_irq_spin_count.
If the lock is NULL, the caller will get global lock (e.g. g_irq_spin) and spin_lock_irqsave() support nest on the same CPU.
If the CPU can write lock, it can call write_lock_irqsave() again (e.g. support nest).
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
test config: ./tools/configure.sh -l qemu-armv8a:nsh_smp
Pass ostest
No matter big-endian or little-endian, ticket spinlock only check the
next and the owner is equal or not.
If they are equal, it means there is a task hold the lock or lock is
free.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Co-authored-by: Xiang Xiao <xiaoxiang781216@gmail.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
This PR is a modification that optimizes priority inheritance
for only one holder. After the above modifications are completed,
the mutex lock->unlock process that supports priority inheritance
can be optimized by 200 cycles.
Before modify: 2000 cycle
After modify: 1742 cycle
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Store the old environment in a local context so another temporary address
environment can be selected. This can happen especially when a process
is being loaded (the new process's mappings are temporarily instantiated)
and and interrupt occurs.
- The code will detect an error condition described in
https://cwiki.apache.org/confluence/display/NUTTX/Signaling+Semaphores+and+Priority+Inheritance
- The kernel will go to PANIC if semaphore holder can't be allocated even
if CONFIG_DEBUG_ASSERTIONS is disabled
- Clean-up code that handled posing of semaphore with priority inheritance
enabled from the interrupt context (remove nxsem_restore_baseprio_irq())
Assert in nxsem_post if:
- Priority inheritance is enabled on a semaphore
- A thread that does not hold the semaphore attempts to post it
This will detect an error condition described in https://cwiki.apache.org/confluence/display/NUTTX/Signaling+Semaphores+and+Priority+Inheritance
None. The debug instrumentation is only enabled if CONFIG_DEBUG_ASSERTIONS is enabled.
Use sim:ostest. Verify that no assertions occur.
sem_t is user memory and the correct mappings are needed to perform
the semaphore wait interruption.
Otherwise either a page fault, or access to the WRONG address environment
happens.
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
add the task from the specified task list to reduce time consuming.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
This commit is intended to solve the bug caused by #7159.
It will fixed data abort issue when task restart in wait sem status.
If delete waitobj in the sem recover function, then we will get the wrong
task list when remove the task from task list.
