sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,369 Commits 1 Branch 0 Tags 291 MiB
3bd810b316
Commit Graph

160 Commits

Author SHA1 Message Date
Gregory Nutt
a8d7772ad6 Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL 2014-08-18 07:24:47 -06:00
Gregory Nutt
004788d7c0 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
7cc93b708a SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts 2014-08-17 14:07:53 -06:00
Gregory Nutt
1db9858e9d KSZ80x1 PHY interrupts are active low and should trigger on the falling edge 2014-08-17 13:15:59 -06:00
Gregory Nutt
057af36c1d More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic 2014-08-16 15:04:09 -06:00
Gregory Nutt
7c11a84c98 Refresh configuration 2014-08-16 12:54:58 -06:00
Gregory Nutt
ec47914cf8 Convert existing board specific PHY interrupt interfaces to use newly defined standard interface 2014-08-16 08:35:31 -06:00
Gregory Nutt
d79c311508 SAMA5 setenv.sh: Add another CodeSourcery install path 2014-08-16 08:33:20 -06:00
Gregory Nutt
eef608b942 Update README files 2014-08-12 10:01:12 -06:00
Gregory Nutt
1787b3e600 SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected 2014-08-11 14:29:43 -06:00
Gregory Nutt
c6273d083d Updated README files 2014-08-10 20:02:45 -06:00
Gregory Nutt
c7a51f4ef1 Cosmetic changed, updated README files, improved comments 2014-08-10 13:11:31 -06:00
Gregory Nutt
b39b227e2a Update README files 2014-08-10 11:34:20 -06:00
Gregory Nutt
0aa7209765 Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems 2014-08-07 13:42:47 -06:00
Gregory Nutt
caba61999a Remove CONFIG_DISABLE_CLOCK 2014-08-07 12:35:24 -06:00
Gregory Nutt
5e045c26c2 Updated README 2014-08-06 12:30:35 -06:00
Gregory Nutt
0e134b5233 Update some defconfig files; enable network initialization thread 2014-08-06 12:22:51 -06:00
Gregory Nutt
b33beb3e20 NSH Networking: Also add an option to let platform-specific logic select the MAC address. 2014-08-06 10:12:10 -06:00
Gregory Nutt
23024b2d6a SAMA5: Some usage documents for media players 2014-08-04 19:23:20 -06:00
Gregory Nutt
cc5c1b6539 WM8904: Update READMEs and defconfigs to last tested configuration 2014-08-04 15:36:16 -06:00
Gregory Nutt
e30d31367a WM8904 interface enable method now returns the previous interrupt state. Correct ordering of some WM8904: Need to provide MCLK before initializing the WM8904, not after 2014-08-04 14:56:20 -06:00
Gregory Nutt
eebdae30b2 Correct the WM8904 interrupt configuration, active high level. Fix that and don't pull-up 2014-08-04 14:54:20 -06:00
Gregory Nutt
1f213064e0 SAMA5 WM8904: Add option to use MAINCK as WM8904 MCLK 2014-08-03 11:01:02 -06:00
Gregory Nutt
159bcc255d SAMA5 PCK: Add Main clock as an option for the PCK clock source 2014-08-03 10:17:50 -06:00
Gregory Nutt
1f2428c087 WM8904: Ad the MCLK frequency to the interface definition. The WM8904 driver needs to know this frequency in order to configure the FLL to generate the correct bitrate 2014-08-01 18:37:56 -06:00
Gregory Nutt
83dab03576 SAMA5 WM8904: Fix errors in programmable clock output configuration 2014-08-01 15:18:58 -06:00
Gregory Nutt
805a02965c SAMA5 SSC: Start Delay is now configurable 2014-08-01 14:10:37 -06:00
Gregory Nutt
50bd2ba46c SAMA5 SSC: Frame Synch Delay is now configurable 2014-08-01 12:25:31 -06:00
Gregory Nutt
c657139b30 SAMA5D3X-EK: Add support for the WM8904 audio CODEC 2014-07-31 11:14:57 -06:00
Gregory Nutt
0ad5d9f85d Add short document for running the NxWM demo 2014-07-31 08:18:07 -06:00
Gregory Nutt
2bdb126d2c SAMA5D4-EK NxWM: The USB keyboard is now the default input device 2014-07-30 17:37:02 -06:00
Gregory Nutt
f91c608d4c dd support for a USB keyboard as the NxConsole and text widget input. Not fully functional as of this initial check-in. Basic functionality is there, but there are conditions were the keyboard gets lost. 2014-07-30 17:01:51 -06:00
Gregory Nutt
376a7bcc12 Costmetic: Update TODO list, README files, refreshed configuration, updated comments 2014-07-30 14:26:50 -06:00
Gregory Nutt
276cc44878 SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller. 2014-07-30 11:20:06 -06:00
Gregory Nutt
9c80dfb31c Updated README file, cosmetic changes to comments and debug output 2014-07-30 10:19:09 -06:00
Gregory Nutt
941df0945a Update TODO listi and README 2014-07-29 20:02:34 -06:00
Gregory Nutt
a826adb679 The SAMA5D4-EK NSH and NxWM configurations now have the auto-mounter configured to automatically mount the FAT file system on HSMCI0 at /mnt/sdcard 2014-07-29 16:36:15 -06:00
Gregory Nutt
3d49eadc80 Cosmetic updates to comments and README files and some naming 2014-07-29 16:35:47 -06:00
Gregory Nutt
d547e59767 Minor warning/latent bug clean-up of auto-mounter logic 2014-07-29 16:35:17 -06:00
Gregory Nutt
7b1b915226 SAMA5D4: Add auto-mounter support for HSMCI0 2014-07-29 15:34:31 -06:00
Gregory Nutt
35d8e3bfcb Update ChangeLog 2014-07-29 12:52:21 -06:00
Gregory Nutt
551b106e2b SAMA5: Poll USB keyboard at a higher rate for better response 2014-07-29 08:57:35 -06:00
Gregory Nutt
53930d5531 SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK 2014-07-29 07:12:36 -06:00
Gregory Nutt
1b6eec572d Cosmetic changes to comments 2014-07-29 07:11:16 -06:00
Gregory Nutt
a428bb753f SAMA5D4-EK: Disable PMIC workaround... it does not work 2014-07-28 17:48:55 -06:00
Gregory Nutt
8c2b458d75 Fixes to last SAMA5 PMIC checkin 2014-07-28 17:09:37 -06:00
Gregory Nutt
950a6979ec SAMA5D4-EK: Add logic to disable the faulty PMIC. This must be done with JP23 open. It is perfomed only from the DRAMBOOT loader 2014-07-28 16:34:19 -06:00
Gregory Nutt
d09ee81320 Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled 2014-07-26 18:47:33 -06:00
Gregory Nutt
16eef02eec Updated README 2014-07-25 10:03:01 -06:00
Gregory Nutt
2b07f11c69 AMA5D4-EK NxWM: Configuration refreshed 2014-07-24 15:06:19 -06:00