Commit Graph

5253 Commits

Author SHA1 Message Date
chao an
589d4a9f8e net/semantic/parser: fix compile warning found by sparse
Reference:
https://linux.die.net/man/1/sparse

Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-30 23:00:00 +08:00
chao an
fb9b41221d semantic/parser: fix compile warning found by sparse
Reference:
https://linux.die.net/man/1/sparse

Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-30 23:00:00 +08:00
paolovolpi
f875db41d4 drivers/can/mcp2515.c Use SPIDEV_CANBUS(config->devid) instead of SPIDEV_CANBUS(0) 2023-05-30 11:48:13 +03:00
Michal Lenc
5f5ffa9380 fix compile warnings caused by incorrect variable format in print
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-05-27 18:52:01 +08:00
Michael Jung
2e27698d6c SLIP: Switch to poll based design
This is a refactored version of the SLIP network driver.  Updates
include:

1. The original design started two kernel threads per SLIP device.
   The refactored version uses file_poll to essentially be driven
   by the UART RX and TX interrupts and pushes work to the low
   priority work queue.

2. The SLIP byte un-/stuffing is more efficient now, using memcpy
   instead of handling each byte individually.

3. The switch of the old SLIP driver to IOBs caused buffer overwrites
   if packets were sent that would not fit into a single IOB.  This is
   fixed now.

Signed-off-by: Michael Jung <michael.jung@secore.ly>
2023-05-26 19:57:57 -03:00
paolovolpi
ecaa62010a drivers/can/mcp2515.c Fix Configure Spi Bus on every bus lock 2023-05-27 03:18:31 +08:00
TimJTi
c904b16cd9 Rename touchscreen ioctls for clarity 2023-05-26 22:42:57 +08:00
paolovolpi
8b27e455b1 drivers/can/mcp2515.c Fix Missing Chipselect de-assert before bus unlocking 2023-05-25 18:55:07 -03:00
fangpeina
0b8d5e993d drivers/lcd: Add JD9851 driver
Added support for the JD9851 TFT controller based on ST7789

Signed-off-by: fangpeina <fangpeina@xiaomi.com>
2023-05-26 02:21:25 +08:00
jianglianfang
73832ab0a4 vnc server: Fix that vnc_updater thread exited caused by readed a null data
When updating the full-screen data, sq_ init() will clear the updqueue and add just one new full-screen data to the updqueue. So when the vnc_updater thread is awakened, it may read a null data due to multiple reading, leading to vnc_updater thread exited , which is not expected.

Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
2023-05-25 22:41:47 +08:00
Xiang Xiao
20ea607bd0 stream: Rename syslogstream to syslograwstream
to prepare a new stream implementation of syslog

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-25 15:22:04 +08:00
chao an
0455167457 stream/syslog: use internal buffer to decoupling syslog with iob
Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-24 09:53:30 +08:00
TimJTi
3cb168b177 GD25 Flash memory - performance enhancements 2023-05-23 01:32:58 +08:00
zhanghu5
a043657323 dma support 16550 uart
Signed-off-by: zhanghu5 <zhanghu5@xiaomi.com>
2023-05-23 01:32:03 +08:00
simbit18
e4ffce3355 Fix Kconfig style
Remove spaces from Kconfig files
2023-05-23 00:03:25 +08:00
Xiang Xiao
7990f90915 Indent the define statement by two spaces
follow the code style convention

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-21 09:52:08 -03:00
Lwazi Dube
ae1fd83a46 usbhost: Can now handle multiple interface descriptors.
See #3644. Code from:
https://github.com/apache/nuttx/compare/master...btashton:libusb
2023-05-21 09:50:36 -03:00
jianglianfang
14c77dce15 fb_driver: add fb_open and fb_close
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
2023-05-19 21:46:07 +08:00
jianglianfang
73a1066613 vnc_server: set touch.maxpoint to 1 for circbuf_init
set touch.maxpoint to 1 in vnc_server.c for circbuf_init,otherwise
touch_event will circbuf_overwrite a wrong value.
test step:vnc run lvgldemo,test input event

Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
2023-05-19 17:42:05 +08:00
Petro Karashchenko
c70b7f6b3d nuttx: improve C89 compatibility in common code
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-05-19 02:40:38 +08:00
Petro Karashchenko
8254b374dd drivers/mmcsd: fix style issues
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-05-19 02:40:38 +08:00
Petro Karashchenko
1e86682feb drivers/mtd: fix C89 compatibility of w25qxxxjv
Correct various style issues

Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-05-19 02:40:38 +08:00
Xiang Xiao
8d56a9bbcb Remove #warning if the code already return the error code or value
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-18 15:44:28 +03:00
simbit18
ca026a5b0f drivers\power\supply\Kconfig: Fix indentation
Remove TABs
2023-05-18 15:43:22 +03:00
Lwazi Dube
9948b5e701 usbhost: Make unplugging hubs more reliable.
USB drivers should not try control devices in the usbhost_disconnected
function. The control endpoint is NULL at this point because the device
has already been disconnected.

Before this change, the hub driver crashed when the child called
usbhost_hubpwr after the parent had already deactivated the control
pipe and set hport->ep0 to NULL.
2023-05-18 13:47:15 +08:00
Michal Lenc
cf04f2e555 w25qxxxjv: add dual die support for 1 Gbit flash
1 Gbit W25Q01JV flash uses two 512 Mbit dies. This requires specific
operations in the driver in order to support the entire 1 Gbit region.
This commit adds dual die support for W25Q01JV flash.

Generally the driver has to switch active dies when die specific read from
status register is required (therefore before read, write, erase and when
checking if write status register was successful).

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-05-18 01:10:55 +08:00
chao an
6be363ff35 drivers/serial: fix race condition in multi-thread write
if multiple threads are doing serial read/write at the same time,
the driver will only wake up one of the thread, which will cause
other threads fail to be woken up in time and cause blocking

Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-17 07:56:08 +02:00
Huang Qi
23ad4700a9 drivers/serial/pty.c: Fix coverity issue
Coverity report that `ntotal` may be a negative value.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2023-05-17 07:44:26 +02:00
Zhe Weng
eb47312518 netdev_upper: Protect quota by spin lock to allow netpkt_xxx be called in interrupt context
Before atomic is ready on every platform, we need a way to protect
quota, previously it's protected by net_lock, but this makes netpkt_xxx
interfaces unable to be called under interrupt context, so changed to
spin lock. Also, we can easily change them into atomic under this
implementation.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-05-16 21:39:05 +08:00
hujun5
6da335cd81 driver/uart_16550: serial output can cause deadlock
All interrupts must be disabled to prevent re-entrancy and to prevent
interrupts from firing in the serial driver code.

Signed-off-by: hujun5 <hujun5@xiaomi.com>
2023-05-16 15:11:38 +08:00
Michal Lenc
482cbc4363 w25qxxxjv: fix STATUS2_QE_ENABLED bitfield write
W25QXXXJV_WRITE_STATUS_2 register uses just first byte therefore all
operations has to be done in priv->cmdbuf[0]. Previous priv->cmdbuf[1]
caused QuadSPI mode not being enabled.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-05-15 10:43:55 +08:00
Masayuki Ishikawa
498a75a58b drivers: virtio: Add virtio-mmio-blk
Summary:
- This commit adds virtio-mmio-blk driver

Impact:
- None

Testing:
- Tested with rv-virt:netnsh which will be updated later

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-05-13 13:58:09 +08:00
TimJTi
b4b9a180c0 Add ATSAMA5D2/D4 Secure Fuse Controller (SFC) driver 2023-05-12 16:29:48 -03:00
zhanghongyu
06a10202af usrsock_server: fix issues with usrsock_rpmsg_sendto_handler
If the current poll setup only has POLLIN, adding POLLOUT does not cause the
protocol stack to refocus on flags such as TCP_ACK or UDP_POLL, the user is
not notified when flags for POLLOUT relationships appear and vice versa,
so we have to call poll_setup again.

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2023-05-12 22:40:41 +08:00
Lwazi Dube
38ba0aefca usbhost_hub: Prevent crash when the last hub port is used.
An off-by-one error caused invalid memory to be accessed when the
last port was used. The first entry, at index 0, was never used.
The USB standard uses 1-based numbering for hub ports. This number
was used to index an array. This change converts the port number to
a zero-based port index when the array is accessed. The zero-based
value in the port field of the usbhost_hubport_s structure is also
converted before printing.

For testing, this bug was exposed on a 4 port hub when port 4 was
used after changing USBHUB_MAX_PORTS to 4 in hub.h. The bug should
also be triggered without changing hub.h if a 7 port hub is
available.
2023-05-12 11:41:26 +08:00
Alan Carvalho de Assis
54d92d1a0f Fix typo -EACESS -> -EACCES 2023-05-12 06:29:35 +03:00
Fotis Panagiotopoulos
4231938892 rtc: Fix compiler warning in driver initialization. 2023-05-11 22:18:10 +03:00
pengyiqiang
26e99ed042 drivers/video/fb: adapt to fbmem dynamic update.
Considering that the future fb needs to achieve dynamic resolution, the address and size of fbmem will be redistributed on the bottom driver side, so remove fbmem, fblen, and bpp cached in fb_chardev_s, and change it to call getplaneinfo every time to re-acquire panel info from the bottom driver. Avoid cache coherency problems.

Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
2023-05-12 01:06:52 +08:00
Lwazi Dube
d66282a893 usbhost: Fix function address generation for multi-port root hubs.
Devices connected to the same USB bus should have unique function addresses.
This was not true for root hubs with multiple ports. After this change,
enumeration is more reliable on the sama5d3-xplained board when both root hub
ports are used.

This change amounts to using one usbhost_devaddr_s object per root hub
instead of one per root hub port. For the majority of boards only one
root hub port is available so no change in behavior should be expected.
2023-05-11 09:44:18 +02:00
simbit18
f12b9c44cb drivers/power/relay/Kconfig: Fix Kconfig style
Remove spaces from Kconfig files
Add TABs
2023-05-10 22:51:11 +08:00
simbit18
e320299ba7 drivers/audio/Kconfig: Fix Kconfig style
Remove spaces from Kconfig files
Add TABs
2023-05-10 22:51:11 +08:00
hujun5
7f4cb3057a arch/arm64: merge serial_pl011.c and qemu_serial.c
At present, the serial drivers qemu_serial.c and serial_pl011.c on the fvp-v8r and qemu platforms in arm64 are duplicated
and need to be merged. The plan is to place them under the drivers\serial directory to create a common code module,
so that both fvp-v8r and qemu can use the same code.
In the future, if new platforms use pl011 serial ports, they can also be directly reused

Signed-off-by: hujun5 <hujun5@xiaomi.com>
2023-05-10 09:06:59 +02:00
gaojiawei
64b51bbbf7 driver/serial/pty.c fix update local flags for the pty device attribute
Signed-off-by: gaojiawei <gaojiawei@xiaomi.com>
2023-05-10 00:47:33 +08:00
raiden00pl
b7341975ab drivers/usbhost/usbhost_cdcacm.c: fix warning 2023-05-09 20:48:51 +08:00
chao an
d3240061db syslog/Kconfig: fix kconfig warning
warning: The int symbol SYSLOG_RPMSG_WORK_DELAY (defined at drivers/syslog/Kconfig:274) is being evaluated in a logical context somewhere. It will always evaluate to n.
make: *** [tools/Unix.mk:663: olddefconfig] Error 1

Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-08 21:36:45 +03:00
Xiang Xiao
325f395300 Replace all strncpy with strlcpy
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-08 09:57:01 +02:00
Xiang Xiao
6f6fce95a2 Replace all sprintf with snprintf
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-08 09:57:01 +02:00
Xiang Xiao
fa8719bb5a Replace all strcat with strlcat
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-05-08 09:57:01 +02:00
Lucas Saavedra Vaz
8b9dc54a0a drivers/audio: Add support for the ES8311 codec
Adds support for the ES8311 audio codec by Everest Semiconductor on NuttX. Both output and input are supported.
2023-05-04 18:41:54 -03:00
Lucas Saavedra Vaz
d82d73c660 audio: Separate common settings for the ESXXXX family of products
To avoid code duplication, the common settings for Everest Semiconductor's codecs were separated in an "esxxxx_common" header
2023-05-04 18:41:54 -03:00