Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
c071e2a30c
Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads.
2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305
Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES
2017-03-27 09:08:14 -06:00
Gregory Nutt
c428661e18
apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.
2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5
Refresh all ARM configurations
2017-03-09 10:23:41 -06:00
Gregory Nutt
454164a88c
stm32_gpiosetevent: GPIO IRQ function should not return the xcpt_t oldhandler. This value is useful and potentially dangerous by itself after the change to assocaite a argument with the interrupt handler.
2017-03-02 18:20:38 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
4f5e0e3519
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 15:27:55 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
a773f9412a
STMPE811 driver needs argument in interrupt handler
2017-02-27 11:41:48 -06:00
Gregory Nutt
4539988d00
Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero().
2017-02-22 10:41:49 -06:00
Gregory Nutt
1d290c2b37
setvbuf: Add support for disabling I/O buffering. Initially cut; untested.
2017-02-09 09:24:44 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Gregory Nutt
4216c4b777
NxWM configurations. If using a 7-bit character set, then the cursor character cannot be 137 (graphic block). Use 95 (underscore) instead.
2017-01-08 09:21:37 -06:00
Gregory Nutt
7035d232f8
NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue.
2017-01-08 09:14:11 -06:00
Gregory Nutt
e1d9bb2ef2
Refresh all NX multi-user configurations
2017-01-08 08:06:18 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gregory Nutt
c83da3c48f
Remove minnsh configurations and support logic: up_getc() and lowinstream.
...
This was an interesting exercise to see just how small you could get NuttX, but otherwise it was not useful: (1) the NSH code violated the OS interface layer by callup up_getc and up_putc directly, and (2) while waiting for character input, NSH would call up_getc() which would hog all of the CPU. NOt a reasonably solution other than as a proof of concept.
2016-12-13 18:01:23 -06:00
Gregory Nutt
35dfe25430
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
2016-12-06 08:51:37 -06:00
Gregory Nutt
ee2852f5ff
Remove all references to board_adc_setup()
2016-12-05 17:06:08 -06:00
Gregory Nutt
55dd1c87b3
Remove all references to BOARDIOC_ADCSETUP
2016-12-05 15:31:40 -06:00
Gregory Nutt
4b216ff8dd
Finish removing traces of BOARDIOC_PWMSETUP
2016-12-05 14:56:21 -06:00
Gregory Nutt
b999e63c82
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
2016-12-05 13:54:12 -06:00
Gregory Nutt
83477c55f8
STM32 Ethernet configurations must have work queue enabled.
2016-12-03 17:06:14 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Gregory Nutt
99987a3d51
Increase max message size in all NxWM configurations.
2016-12-02 08:38:42 -06:00
Gregory Nutt
86b5f3b9ed
boardctl: Add new command to start the NX server as a kernel thread. Also refresh more configurations.
2016-12-01 15:05:57 -06:00
Gregory Nutt
6dda185e8a
NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode.
2016-12-01 13:30:24 -06:00
Gregory Nutt
44e747ebf1
Remove all references to CONFIG_NET_MULTIBUFFER from configs/
2016-11-29 15:07:30 -06:00
Gregory Nutt
439c72e7c8
Refresh all networking configurations due to changes in work-queue related configuration variables for Ethernet drivers.
2016-11-19 09:41:24 -06:00
Beat Küng
c7da88e383
CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used
...
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
2016-08-22 08:35:01 +02:00
Gregory Nutt
b071e4ce92
Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes
2016-08-08 12:50:14 -06:00
Gregory Nutt
f43ded46e6
Rename arch/sh to arch/renesas, cont'd
2016-08-06 14:03:38 -06:00
Gregory Nutt
1b9b3a7b47
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425
can.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:38:36 -06:00
Gregory Nutt
2a19e16eb0
libc/hex2bin: Move the portable library portion of apps/system/hex2bin to nuttx/libc/hex2bin where it can be shared with the OS internals.
2016-06-27 11:22:38 -06:00
Gregory Nutt
1377452394
Refresh all ARM configurations
2016-06-23 15:59:14 -06:00
Gregory Nutt
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
2b445ddccc
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
2016-06-20 08:57:08 -06:00
Gregory Nutt
5b2aa7bf99
Remove all traces of CONFIG_SYSLOG
2016-06-19 13:59:43 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
03cbe671ad
Centralize definitions associated with CONFIG_DEBUG_PWM
2016-06-15 17:23:56 -06:00
Gregory Nutt
63b1eb09e6
Centralize definitions associated with CONFIG_DEBUG_CAN
2016-06-15 15:45:27 -06:00