sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
42,947 Commits 1 Branch 0 Tags 291 MiB
3c1ac89557
Commit Graph

1925 Commits

Author SHA1 Message Date
Eero Nurkkala
c7cf9fd9d2 mpfs: board Make.defs: add bootloader linker option 
Use the linker script used with bootloaders that start
from the eNVM.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
ad76b6733c mpfs: boards: add ld-envm.script 
This configuration is used when flashing nuttx as a bootloader
in the eNVM region.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
3b330089d5 mpfs: ddr: add DDR training 
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.

DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:

  envm (rx)   : ORIGIN = 0x20220100, LENGTH = 128K - 256
  l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k

256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git

For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:

 cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
 cat nuttx.bin >> nuttx_bootloader.bin
 riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
  *+0x20220000 nuttx_bootloader.bin flashable_image.hex

This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Alin Jerpelea
40b467420f author: Florian Olbrich : update licenses to Apache 
Gregory Nutt has submitted the SGA
Florian Olbrich has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-10-21 10:14:11 +02:00
Gustavo Henrique Nihei
2a8e7b064d boards/esp32: Return proper error code on esp32_spiflash_init 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-20 09:54:25 -05:00
Gustavo Henrique Nihei
7368f7a2c8 xtensa/esp32: Make SPI Flash initialization common to all ESP32 boards 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-20 09:54:25 -05:00
Abdelatif Guettouche
9235d6605b boards/esp32&esp32c3: Remove crypto accelerators' defconfigs. 
Since the tests were removed from the drivers, there is no need for
these defconfigs anymore.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
55e8b17974 boards/risc-v/esp32c3: Remove the flash encryption test. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
e424241d09 arch/risc-v/esp32c3: Remove the bignum test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
91cb9dafaf arch/risc-v/esp32c3: Remove the RSA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
652d77efd2 arch/risc-v/esp32c3: Remove the SHA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
5d1c01aea7 arch/risc-v/esp32c3: Remove the AES test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
8288a04a0b arch/xtensa/esp32: Remove the AES test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Gustavo Henrique Nihei
0299e7d35d tools/esp32: Refactor generation of QEMU-compatible image 
Use the merge_bin builtin function from esptool.py.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-19 23:23:43 +02:00
Jari van Ewijk
177acf57c2 S32K1XX boards: Implement userled_getall function 2021-10-18 12:30:18 -07:00
Matheus Castello
5c15fe6ec1 boards: k210: Add initial gpio user space support 
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
 2021-10-17 17:29:59 +09:00
Abdelatif Guettouche
1de17c364f esp32.ld: Force some of libsched.a symbols to internal SRAM. They are used 
when the cache is disabled.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Abdelatif Guettouche
d1ecb8b2e6 esp32.ld: Force some of libarch.a symbols to internal SRAM. They are used 
when the cache is disabled.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Alan C. Assis
e0389ce1fb build: Replace 'make download' with 'make flash' 2021-10-14 16:33:27 -03:00
Matheus Castello
1bc3ab513d boards: risc-v: k210: Fix -march and -mabi 
-march=rv64gc -mabi=lp64 does not resolve lib paths for
riscv64-unknown-elf-gcc resulting in lib not found errors.
Changing it to -march=rv64imafc -mabi=lp64f that is the default
used in Sipeed repositories.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
 2021-10-14 15:50:20 +09:00
Alin Jerpelea
c3617d021a author: Elfaro Lab SL : update licenses to Apache 
Gregory Nutt has submitted the SGA
Elfaro Lab SL has submitted the SGA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-10-13 04:52:53 -07:00
Gustavo Henrique Nihei
2739f86654 boards/esp32: Remove SPI Flash encryption test 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-11 09:06:02 -07:00
jsun
c58fddb915 Open ble controller adaptation code 
N/A

Signed-off-by: jsun <jsun@bouffalolab.com>
 2021-10-08 02:30:27 -07:00
Alan C. Assis
04d63cf8b0 Add example to use BLE and WiFi at same time 2021-10-06 07:48:10 -07:00
P.Brier
f6fdc81c2d Added reset code to allow the teensy to compile with CONFIG_BOARDCTL_RESET and be able to reset the board in code 2021-10-06 10:18:14 -03:00
Gustavo Henrique Nihei
0a1b3c1331 risc-v/esp32c3-devkit: Add BLE defconfig 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Gustavo Henrique Nihei
47e804b167 risc-v/esp32c3: Make BLE adapter code compliant to nxstyle 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Alan C. Assis
867c6d0636 esp32: Add initial support to Bluetooth Low Energy 
Co-authored-by: saramonteiro <saramonteirosouza44@gmail.com>
Co-authored-by: Gustavo Henrique Nihei <gustavonihei@gmail.com>
 2021-10-04 15:10:37 -03:00
Abdelatif Guettouche
284c6f50e4 esp32s2_rom.ld: Add a strong declaration of some libgcc functions that are 
ROM resident.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-01 10:09:04 -03:00
Abdelatif Guettouche
ee20d0f545 esp32c3_rom.ld: Add a strong declaration to some libgcc function that 
are ROM resident.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-01 10:09:04 -03:00
Abdelatif Guettouche
a0488a31b3 boards/esp32: Strongly declare libgcc symbols that exist in the ROM 
linker script, so that we can link them instead of those present in
libgcc.a

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-01 10:09:04 -03:00
Masayuki Ishikawa
43de6cce13 boards: spresense: Add charger/defconfig 
Summary:
- This commit adds charger/defconfig

Impact:
- None

Testing:
- Build only

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-09-29 23:37:41 -07:00
P.Brier
b9d1fcb232 Use ethernet MAC programmed in imxrt OCOTP MAC0/MAC1 (teemsy board has this) 2021-09-29 20:45:14 -07:00
Alin Jerpelea
2984a4dcb6 boards: Omni Hoverboards: update licenses to Apache 
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
Paul Alexander Patience  has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-28 04:37:38 -07:00
Alin Jerpelea
1e8d0e02ef boards: Gregory Nutt: update licenses to Apache 
Gregory Nutt has submitted the SGA
as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-28 04:37:38 -07:00
Gustavo Henrique Nihei
548f2b6eab boards/esp32c3-devkit: Add mcuboot_confirm defconfig 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
3c63cb522c risc-v/esp32c3: Enable booting from MCUboot bootloader 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
75dd460f79 boards/esp32s2-saola-1: Add example defconfig for booting from MCUboot 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:21:53 -07:00
Gustavo Henrique Nihei
800678ca78 xtensa/esp32s2: Enable booting from MCUboot bootloader 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:21:53 -07:00
Alexander Lunev
ea42f84d9a stm32f746g-disco, stm32f769i-disco: "ifconfig: Could not open /proc/net (is procfs mounted?): 20": 
In case of "netnsh" configuration network adapter did not work and ifconfig reported the error.
 2021-09-26 20:12:13 -07:00
Sara Souza
962059f843 xtensa/esp32-s2: Adds oneshot device driver support 2021-09-22 22:53:54 -03:00
Sara Souza
fba6fa2dc1 xtensa/esp32-s2: Adds support to rt_timer and systimer to ESP32-S2. 2021-09-22 17:18:24 -03:00
Pedro Bertoleti
64e8322974 Add LCD backpack support for ESP32 (devkit-c). 2021-09-22 16:58:36 -03:00
Sara Souza
0504e1d5f6 esp32-devkitc/wifinsh: Adds missing dependency on defconfig 2021-09-21 15:16:47 -03:00
Jari van Ewijk
107e80b61f UCANS32K146 board: s32k1xx_userleds.c style fix 2021-09-21 07:22:06 -07:00
Jari van Ewijk
4b24eca0cf S32K1XXEVB boards: Fix RGB LED output and add comments 2021-09-21 07:22:06 -07:00
Alan C. Assis
f9b322567c boards/esp32c3: Remove "return ret" from bringup 2021-09-21 10:34:55 -03:00
Alan C. Assis
7edb39f880 boards/esp32: Remove "return ret" from bringup function 
During the lcd1602 tests on our internal CI we noticed that the
lcd1602 was failing because there is not a I2C display in the
emulated board on QEMU. It is better to remove the "return ret"
from the bringup because the user will see the error anyway.
 2021-09-21 10:34:55 -03:00
Alan C. Assis
63a17f5cdd esp32c3-devkit: Add board profile to use LVGL on GC9A01 display 2021-09-18 20:58:30 -05:00
Janne Rosberg
e022ea1283 mpfs/icicle/configs/hwtest: enable SD card 2021-09-18 12:18:09 -03:00