Commit Graph

5021 Commits

Author SHA1 Message Date
Alessandro Temil
3eb14f3999 Correct some LPC4350 GPIO pin configurations. From Alessandro Temil 2015-07-09 12:09:00 -06:00
Gregory Nutt
4e98d01098 SAMD21: Correct some GCLK ID definitions for SERCOM 2015-07-06 09:26:49 -06:00
Gregory Nutt
31476394bc SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21 2015-07-04 13:18:30 -06:00
Gregory Nutt
049224f544 Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M 2015-07-04 10:39:24 -06:00
Gregory Nutt
6b51eca309 Simulatin: Save the intial terminal mode and restore this before terminating. Otherwise, the NSH shutdown command leaves the console in raw mode 2015-07-04 08:43:10 -06:00
Gregory Nutt
b9b8b34bca sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y 2015-07-04 08:16:45 -06:00
Gregory Nutt
ceda8bc73d Add a board_app_initilize() stub function needed by the simulatin when CONFIG_LIB_BOARDCTL=y 2015-07-04 07:35:14 -06:00
Gregory Nutt
4c54db68bd Implementment board_power_off() for the simulation platform. 2015-07-04 07:22:38 -06:00
Gregory Nutt
f235144989 SAMD20/1: Fix some typos found by inspecting header files 2015-07-04 07:19:52 -06:00
Gregory Nutt
5300347e9e PIC32 USB device: Fix some backward conditional compilation; fix some warnings 2015-07-03 14:37:46 -06:00
Gregory Nutt
a08b8f94c0 PIC32 SPI: Fix some backward conditional compilation 2015-07-03 14:36:56 -06:00
Gregory Nutt
74b4aaa265 MIPS32 header: Missing comma in prototype. How did that happen 2015-07-03 14:36:19 -06:00
Gregory Nutt
3e04194edd SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet 2015-07-03 09:33:52 -06:00
Gregory Nutt
d6eacb3ab5 Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF 2015-07-03 06:53:51 -06:00
Gregory Nutt
c0946bfd7d Correct some issues introduced in the last commit 2015-07-02 17:54:05 -06:00
Gregory Nutt
27ea02a85f Modify board_power_off() so that is is called only via boardctl() 2015-07-02 17:09:54 -06:00
Gregory Nutt
064b4923c6 Move prototype of board_power_off() to include/nuttx/board.h where it belongs 2015-07-02 16:25:31 -06:00
Gregory Nutt
9db4d7da94 STM32 RTCC: Eliminate a warning when ALARM support is enabled 2015-07-02 15:02:59 -06:00
Gregory Nutt
0f0800de25 Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations 2015-07-02 11:13:23 -06:00
Gregory Nutt
8fa6ecc1b9 Remove a warning 2015-07-01 18:25:13 -06:00
Gregory Nutt
09c7373f24 Fix misc. compilation error/warning detected by tools/testbuild.sh 2015-07-01 14:33:37 -06:00
Gregory Nutt
c6f56ccf8c Fix some typos in header files 2015-07-01 11:45:08 -06:00
Gregory Nutt
962b243302 lpc214x USB device: Fix a warning 2015-07-01 10:25:14 -06:00
Gregory Nutt
ff389b15ab LPC17xx: Fix a warning about an unused local variable 2015-07-01 09:36:39 -06:00
Gregory Nutt
32e41423e4 Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL. 2015-07-01 08:34:51 -06:00
Gregory Nutt
05575c8e2b DM320: GIO header uses get/putreg functions and so should include up_arch.h 2015-07-01 08:01:49 -06:00
Gregory Nutt
6e591f6f52 arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected. 2015-07-01 07:04:02 -06:00
Alan Carvalho de Assis
08375ecd7d Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis 2015-06-30 11:42:48 -06:00
Alan Carvalho de Assis
a5eb02e2d0 Fix Cortex-M0 assembly error when the interrupt stack is enabled 2015-06-30 08:41:47 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
ce9e321598 SAMD21: Update SPI and I2C header files for SAMD21 support 2015-06-22 13:12:00 -06:00
Max Neklyudov
0920de059a SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov. 2015-06-22 09:32:15 -06:00
Gregory Nutt
633a2b3be2 SAMD21: Update WDT and EVSYS header files for SAMD21 support 2015-06-22 09:15:54 -06:00
Gregory Nutt
3751f9f7ac Back out another error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). 2015-06-22 07:48:29 -06:00
Max Neklyudov
4dc6164ba1 SAM4CM: Fix SUPC register definitions. From Max Neklyudov
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
2015-06-22 06:52:57 -06:00
Max Neklyudov
01a35ff27f sam4cm: add CFB and MAC AES modes. From Max Neklyudov 2015-06-22 06:42:37 -06:00
Max Neklyudov
48dbc5c72b Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov. 2015-06-22 06:19:45 -06:00
Gregory Nutt
bf40b36a27 SAMD21: Update SAMD SYSCTRL and NVMCTRL definitions for the SAMD21 2015-06-21 11:40:23 -06:00
Gregory Nutt
0546eb7d04 SAMD21: Update fuse definitions for the SAMD21 2015-06-21 10:20:23 -06:00
Gregory Nutt
a572120aa4 SAMD21: Extend SAMD USART support to include SAMD21 differences 2015-06-21 09:17:01 -06:00
Gregory Nutt
c8e6720c62 Add board configuration for the SAMD21 Xplained board 2015-06-21 07:48:46 -06:00
Gregory Nutt
764817e2b0 SAMD21: Add pin multiplexing definitions 2015-06-20 18:55:23 -06:00
Gregory Nutt
8750bf0d9a SAMD2x: Eliminate a warning 2015-06-20 16:06:01 -06:00
Gregory Nutt
c03d642b36 Missed a few in previous commit 2015-06-20 15:55:56 -06:00
Gregory Nutt
ba1f9e2272 SAMD21: Update GCLKs for SAMD21 2015-06-20 15:55:21 -06:00
Gregory Nutt
9fc91cfa5a SAMD21: Update PM definitions for SAMD21 support 2015-06-20 15:32:57 -06:00
Gregory Nutt
62973af6eb SAMD21: Add memory map header file 2015-06-20 15:02:25 -06:00
Gregory Nutt
ab277096fd SAMD21: Add interrupt vectors definitions 2015-06-20 14:40:47 -06:00
Gregory Nutt
c168878933 SAMD21: Add interrupt vectors definitions 2015-06-20 14:40:36 -06:00
Gregory Nutt
138830d53f Add configuration support for SAMD21 2015-06-20 14:31:53 -06:00