Gregory Nutt
|
5832c150d7
|
arch/arc/src: Remove all driver-specific logic to set the interrupt priority. There is no good reason to change the interrupt priority unless you just want to debug a difficult problem. OR is you want to use high priority interrupts. In that case the specific interrupt priorities will need to be set by board-specific logic.
|
2018-12-06 13:34:41 -06:00 |
|
Gregory Nutt
|
51be83aa3a
|
ARM: Fix missing header file. Update comments in all *_irq.c files.
|
2016-03-09 15:08:58 -06:00 |
|
Gregory Nutt
|
4d4f54a789
|
Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs
|
2016-03-09 13:41:48 -06:00 |
|
Gregory Nutt
|
83bc1c97c3
|
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
|
2016-02-14 16:11:25 -06:00 |
|
Gregory Nutt
|
70e502adb0
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
Gregory Nutt
|
d235dcc3b0
|
Rename the LPC2378 header file internal.h to lpc2378.h
|
2015-12-29 18:17:23 -06:00 |
|
Gregory Nutt
|
36726b1bc4
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:42:29 -06:00 |
|
Gregory Nutt
|
f0d318c124
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
Gregory Nutt
|
6455f60c60
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
Gregory Nutt
|
729a3020a7
|
Fix some confusion in the code about vectored interrupts; fix so that it builds with prioritized interrutps disabed
|
2014-03-08 10:57:11 -06:00 |
|
patacongo
|
3a262416d6
|
Remove executable property from source and make files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5146 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:46:10 +00:00 |
|
patacongo
|
36df84c843
|
Email address change in nuttx/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:32:24 +00:00 |
|
patacongo
|
7bb3b4c8a1
|
current_regs should be volatile; add support for nested interrupts; enable interrupts during syscall processing
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3475 42af7a65-404d-4744-a932-0658087f49c3
|
2011-04-06 23:01:06 +00:00 |
|
patacongo
|
03a78173be
|
Run indent.sh agains lpc2378 code
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2588 42af7a65-404d-4744-a932-0658087f49c3
|
2010-04-11 19:17:03 +00:00 |
|
patacongo
|
75ed1a4ff6
|
lpc2378 port contributed by Rommel Marcelo
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2579 42af7a65-404d-4744-a932-0658087f49c3
|
2010-04-09 01:14:24 +00:00 |
|