SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
The function is not relevant any longer, remove it. Also remove
save_addrenv_t, the parameter taken by up_addrenv_restore.
Implement addrenv_select() / addrenv_restore() to handle the temporary
instantiation of address environments, e.g. when a process is being
created.
There is currently a big problem in the address environment handling which
is that the address environment is released too soon when the process is
exiting. The current MMU mappings will always be the exiting process's, which means
the system needs them AT LEAST until the next context switch happens. If
the next thread is a kernel thread, the address environment is needed for
longer.
Kernel threads "lend" the address environment of the previous user process.
This is beneficial in two ways:
- The kernel processes do not need an allocated address environment
- When a context switch happens from user -> kernel or kernel -> kernel,
the TLB does not need to be flushed. This must be done only when
changing to a different user address environment.
Another issue is when a new process is created; the address environment
of the new process must be temporarily instantiated by up_addrenv_select().
However, the system scheduler does not know that the process has a different
address environment to its own and when / if a context restore happens, the
wrong MMU page directory is restored and the process will either crash or
do something horribly wrong.
The following changes are needed to fix the issues:
- Add mm_curr which is the current address environment of the process
- Add a reference counter to safeguard the address environment
- Whenever an address environment is mapped to MMU, its reference counter
is incremented
- Whenever and address environment is unmapped from MMU, its reference
counter is decremented, and tested. If no more references -> drop the
address environment and release the memory as well
- To limit the context switch delay, the address environment is freed in
a separate low priority clean-up thread (LPWORK)
- When a process temporarily instantiates another process's address
environment, the scheduler will now know of this and will restore the
correct mappings to MMU
Why is this not causing more noticeable issues ? The problem only happens
under the aforementioned special conditions, and if a context switch or
IRQ occurs during this time.
Detach the address environment handling from the group structure to the
tcb. This is preparation to fix rare cases where the system (MMU) is left
without a valid page directory, e.g. when a process exits.
sim/rpserver
NuttShell (NSH) NuttX-12.0.0
server> cu
_assert: Current Version: NuttX server 12.0.0 3ead669e7a-dirty Feb 2 2023 23:53:48 sim
_assert: Assertion failed : at file: libs/libc/misc/lib_mutex.c:303 task: cu 0x5662fff4
Signed-off-by: chao an <anchao@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
First configure nuttx to support ipv4 and ipv6 dual stack,
then start two simulators and run Iperf ipv4 udp speed test,
unaligned access exception to sockaddr_in occours.
The root cause is that struct sockaddr_storage isn't set to
the desired alignment.
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Here is a case how to use arg:
If application need do the ADC conversion as the same frequency and phase
of PWM, he can pass a semaphore as arg and then PWM driver will post the
semaphore in he start point of every period.
Signed-off-by: zhangchengqi <zhangchengqi@xiaomi.com>
dbus/dbus/dbus-pollable-set-epoll.c:258:18: error: ‘EPOLLET’ undeclared
(first use in this function); did you mean ‘EPOLLERR’?
258 | event.events = EPOLLET;
| ^~~~~~~
| EPOLLERR
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This is preparation for moving address environments out of the group
structure into the tcb.
Why move ? Because the group is destroyed very early in the exit phase,
but the MMU mappings are needed until the context switch to the next
process is complete. Otherwise the MMU will lose its mappings and the
system will crash.
continue the follow work:
commit 43e7b13697
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jan 22 19:31:32 2023 +0800
assert: Log the assertion expression in case of fail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
ptrdiff_t is defined as intptr_t that is defined as _ssize_t in Nuttx.
The real size depends on architecture and the PTR_MAX and PTR_MIN is
specified by it.
the application can access the remote cpu touch driver by
rpmsgdev, so the defines and struct will be used even if not
enable the CONFIG_INPUT/CONFIG_INPUT_TOUCHSCREEN.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
in user space
Use the flag (COP_FLAG_UPDATE)structure member to mark
whether it is just input data.
like this:
can do manys times,just input data
....
cryp.ses = session.ses;
cryp.op = COP_ENCRYPT;
cryp.src = (caddr_t) s;
cryp.len = len;
cryp.flags = COP_FLAG_UPDATE;
cryp.dst = 0;
cryp.mac = (caddr_t) out;
cryp.iv = 0;
if (ioctl(cryptodev_fd, CIOCCRYPT, &cryp) == -1)
{
warn("CIOCCRYPT");
goto err;
}
can do manys times like frist...
then,the last time
Don't use any flay structure member to mark
this is last time,need get final result
....
cryp.ses = session.ses;
cryp.op = COP_ENCRYPT;
cryp.src = (caddr_t) s;
cryp.len = len;
cryp.flags = 0;
cryp.dst = 0;
cryp.mac = (caddr_t) out;
cryp.iv = 0;
if (ioctl(cryptodev_fd, CIOCCRYPT, &cryp) == -1)
{
warn("CIOCCRYPT");
goto err;
}
....
that will get last result.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
This PR adds the existing Goodix GT9XX Touch Panel Driver to the Bringup Function for PINE64 PinePhone.
With this PR, LVGL Touchscreen Apps will respond to Touch Input on PinePhone.
### Modified Files
`boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Added GT9XX Touch Panel Driver to PinePhone Bringup Function
`boards/arm64/a64/pinephone/src/Makefile`: Added `pinephone_touch.c` to the Makefile
`include/nuttx/input/gt9xx.h`: Fixed a comment in GT9XX Touch Panel Driver
### New Files
`boards/arm64/a64/pinephone/src/pinephone_touch.c`, `pinephone_touch.h`: Register GT9XX Touch Panel Driver on PinePhone
`boards/arm64/a64/pinephone/configs/lvgl/defconfig`: Added PinePhone Board Config `lvgl` to support LVGL Touchscreen Apps
### Updated Documentation
`Documentation/platforms/arm/a64/boards/pinephone/index.rst`: Added PinePhone Board Config `lvgl` for LVGL Touchscreen Apps
The memalign is special to multiple mempool because multiple mempool
doesn't support split and shrink chunk operate. So When you alloc a
memory block and find an aligned address in this block, you need to
occupy 8 bytes before the address to save the address of the padding
size and pool to ensure correct use in realloc and free operations.
So we will use bit1 in the previous address of the address to represent
that it is applied by memalign.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This delta describes the relationship between the block size of each
mempool in multiple mempool by user initialized. It is automatically
detected by the mempool_multiple_init function. If the delta is not
equal to 0, the block size of the pool in the multiple mempool is an
arithmetic progressions, otherwise it is an increasing progressions.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Let's specify size instead of number, so that we can unify the size of
expansion memory in the multiple mempool.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
the crash backtrace:
kasan_report (addr=0xf3d02fd4, size=4, is_write=false) at
kasan/kasan.c:106
0x5658518d in __asan_loadN_noabort (addr=0xf3d02fd4, size=4) at
kasan/kasan.c:300
0x565851ee in __asan_load4_noabort (addr=0xf3d02fd4) at
kasan/kasan.c:334
0x56580b02 in sq_remfirst (queue=0xf3d02b08) at
queue/sq_remfirst.c:45
0x565e0e0b in mempool_alloc (pool=0xf3d02aec) at
mempool/mempool.c:161
0x566033d2 in mempool_multiple_alloc (mpool=0xf3d02a30, size=16) at
mempool/mempool_multiple.c:147
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
- Also remove the nuttx private shm.h file nuttx/mm/shm.h, which became redundant
- Also remove the gran allocator initialization/release in binfmt since common
vpage allocator is initialized in group_create/group_leave
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The dependency should be vice versa; the MM_SHM should depend on the
existence of the virtual memory range allocator.
Create a new CONFIG flag CONFIG_ARCH_VMA_MAPPING, which will define that
there is a virtual memory range allocator. Make MM_SHM select that flag
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Replace static gs_vaddr with a new dynamic mapping list. Collecting all
this kind of virtual memory mappings into a single structure makes
things more consistent.
This still leaves the task group specific granule alloocator, gs_handle,
in the task group
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The task_group specific list can be used to store information about
mmappings.
For a driver or filesystem performing mmap can also enable munmap by
adding an item to this list using mm_map_add(). The item is then
returned in the corresponding munmap call.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
and Fix include/nuttx/mm/map.h:55:28: error: 'struct task_group_s' declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
change 1: rename sysview.c to note_sysview.c
change 2: add note_ prefix to sysview's public function
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
ECG sensors usually output some status info besides ECG data, such as lead and fast-recovery status. Thus a new member "status" is added into sensor_ecg struct.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The pw_gecos field is not specified in POSIX, but is
present on most implementations.
passwd file format:
name:uid:gid:gecos:dir:shell
ex: gdm❌127:133:Gnome Display Manager:/var/lib/gdm3:/bin/false
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
When the signal sent by the sender is blocked in the target task,
if the target task has an action registered with sa_flags SA_KENELHAND,
it will directly respond to the action in the context of the sender.
When the action is executed, it will have the parameters set by the
target task with sigaction:sa_user.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
_assert is a kernel procedure, entered via system call to make the core
dump in privileged mode.
Running exit() from this context is not OK as it runs the registered
exit functions and flushes streams, which must not be done
from privileged mode as it is a security hole.
Thus, implement assert() into user space (again) and remove the exit()
call from the kernel procedure.
This is preparation for flushing streams from user space, like it should
be done.
- Move tg_streamlist (group, kernel space) ->
ta_streamlist (TLS, user space)
- Access stream list via tg_info in kernel
- Access stream list via TLS in user space
- Remove / rename nxsched_get_streams -> lib_getstreams
- Remove system call for nxsched_get_streams
This PR adds the driver for Allwinner A64's MIPI Display Serial Interface (DSI) and MIPI Display Physical Layer (D-PHY).
This driver will be used by the upcoming Display Driver for PINE64 PinePhone.
- `include/nuttx/crc16.h`: Added 16-bit CRC-CCITT
- `libs/libc/misc/Make.defs`: Added 16-bit CRC-CCITT to Makefile
- `arch/arm64/src/a64/Kconfig`: Added the Kconfig option for "A64 Peripheral Selection > MIPI DSI" (`CONFIG_A64_MIPI_DSI`), which enables the MIPI DSI Driver
- `arch/arm64/src/a64/hardware/a64_memorymap.h`: Added the Base Address for MIPI DSI
- `arch/arm64/src/a64/Make.defs`: Added the MIPI DSI Driver to the Makefile
- `libs/libc/misc/lib_crc16ccitt.c`: Compute 16-bit CRC-CCITT
- `arch/arm64/src/a64/mipi_dsi.c`, `mipi_dsi.h`: Compose MIPI DSI Packets (Long, Short, Short with Parameter)
- `arch/arm64/src/a64/a64_mipi_dsi.c`, `a64_mipi_dsi.h`: MIPI DSI Driver for Allwinner A64
- `arch/arm64/src/a64/a64_mipi_dphy.c`, `a64_mipi_dphy.h`: MIPI D-PHY Driver for Allwinner A64
- `platforms/arm/a64/boards/pinephone/index.rst`: Added MIPI DSI as supported peripheral for PinePhone
Co-Authored-By: Petro Karashchenko <petro.karashchenko@gmail.com>
1.fix type warning for compile
2.hamc key can less than specified length
3.add new version algorithms to cryptodev
sha256hmac
sha384hmac
sha512hmac
aes128gmac
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
public header files put into include/crpyto
private header/source files put into crpyto
crypto.c cryptodev.[c|h] cryptosoft.[c|h] come from:
commit id is f245bed2a7593bf0decce50caaed4ce05fefd6cf
the rest come from:
commit id is 61b0e532b2dce0a91cf3ea67d346645a61a88cdd
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Problem:
- `iob_copyout` to `d_buf` doesn't set `io_len` of the IOB, so `devif_poll` failed to copy the data into `buf` by `iob_copyout`
Modification:
- Just Move the IOB in `devif_forward`.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob
Signed-off-by: chao an <anchao@xiaomi.com>
The following APIs need to be overriden by the arch after enabling
CONFIG_NET_ARCH_CHKSUM, move these functions to the common header
file to avoid prototype conflicts
uint16_t chksum(uint16_t sum, FAR const uint8_t *data, uint16_t len);
uint16_t net_chksum(FAR uint16_t *data, uint16_t len);
uint16_t ipv4_upperlayer_chksum(FAR struct net_driver_s *dev, uint8_t proto);
uint16_t ipv6_upperlayer_chksum(FAR struct net_driver_s *dev,
uint8_t proto, unsigned int iplen);
uint16_t ipv4_chksum(FAR struct ipv4_hdr_s *ipv4);
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- This commit adds virtio-mmio and virtio-net drivers
Impact:
- None (new drivers)
Testing:
- Tested with rv-virt (will be updated later) with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
1. epoll_ctl(EPOLL_CTL_ADD) support extend the epoll
events dynamicly;
2. enhance the epoll performance by moving some poll setup
and teardown process to the EPOLL_CTL_ADD/DEL/MOD;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
This will allow changing the underlying backend, i.e. granule allocator,
to something more efficient, if this is needed later.
Also, it gives easier access to the common SHM book keeping.
User can ask for specific granules to be allocated.
This is useful for one thing only: when mmap() is called for a specific
vaddr. The parameter itself is non-sensical, this is just to satisfy
the POSIX standard.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
add the task from the specified task list to reduce time consuming.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
