This is just unnecessary, a process cannot be destroyed by another
process in any case, every time this is executed the active address
environment is the process getting destroyed.
Even in the hypothetical case this was possible, the system would
crash at once if a context switch happens between "select()" and
"restore()", which is possible as the granule allocator is protected by
a semaphore (which is a synchronization point).
- Also remove the nuttx private shm.h file nuttx/mm/shm.h, which became redundant
- Also remove the gran allocator initialization/release in binfmt since common
vpage allocator is initialized in group_create/group_leave
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
tg_info is still in use after task_uninit_info(), unifies
lib_stream_* with life cycle of task info to avoid this issue.
| ==1940861==ERROR: AddressSanitizer: heap-use-after-free on address 0xf47032e0 at pc 0x5676dc4f bp 0xf2f38c68 sp 0xf2f38c58
|
|#10 0xf7abec89 in __asan::__asan_report_load2 (addr=4100993760) at ../../../../src/libsanitizer/asan/asan_rtl.cpp:119
|#11 0x5677356a in nxsem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:73
|#12 0x56773695 in sem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:120
|#13 0x5676faa2 in nxmutex_destroy (mutex=0xf47032e0) at include/nuttx/mutex.h:126
|#14 0x567a3430 in lib_stream_release (group=0xf4901ba0) at stdio/lib_libstream.c:98
|#15 0x5676da75 in group_release (group=0xf4901ba0) at group/group_leave.c:162
|#16 0x5676e51c in group_leave (tcb=0xf5377740) at group/group_leave.c:360
|#17 0x569fe79b in nxtask_exithook (tcb=0xf5377740, status=0) at task/task_exithook.c:455
|#18 0x569f90b9 in _exit (status=0) at task/exit.c:82
|#19 0x56742680 in exit (status=0) at stdlib/lib_exit.c:61
|#20 0x56a69c78 in iperf_showusage (progname=0xf2f28838 "iperf", exitcode=0) at iperf_main.c:91
|#21 0x56a6a6ec in iperf_main (argc=1, argv=0xf2f28830) at iperf_main.c:140
|#22 0x5679c148 in nxtask_startup (entrypt=0x56a69c78 <iperf_main>, argc=1, argv=0xf2f28830) at sched/task_startup.c:70
|#23 0x56767f58 in nxtask_start () at task/task_start.c:134
Signed-off-by: chao an <anchao@xiaomi.com>
The task_group specific list can be used to store information about
mmappings.
For a driver or filesystem performing mmap can also enable munmap by
adding an item to this list using mm_map_add(). The item is then
returned in the corresponding munmap call.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Summary:
- I noticed that nxplayer (HTTP audio streaming) + command execution
via telnet sometimes causes memory corruption.
See https://github.com/apache/nuttx/pull/7947 for the detail.
- This commit fixes this issue by calling lib_stream_release() before
lib_stream_release() in group_leave.c
Impact:
- Should be none
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
When the signal sent by the sender is blocked in the target task,
if the target task has an action registered with sa_flags SA_KENELHAND,
it will directly respond to the action in the context of the sender.
When the action is executed, it will have the parameters set by the
target task with sigaction:sa_user.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
_assert is a kernel procedure, entered via system call to make the core
dump in privileged mode.
Running exit() from this context is not OK as it runs the registered
exit functions and flushes streams, which must not be done
from privileged mode as it is a security hole.
Thus, implement assert() into user space (again) and remove the exit()
call from the kernel procedure.
Instantiate the correct address environment when reading the process's
argument vector. Otherwise doing this will crash the system every time,
causing a recursive assert loop.
Also try to do a bit of sanity checking before attempting to read the
process's memory, it might be in a bad state in which case this will
fail anyway.
This is preparation for flushing streams from user space, like it should
be done.
- Move tg_streamlist (group, kernel space) ->
ta_streamlist (TLS, user space)
- Access stream list via tg_info in kernel
- Access stream list via TLS in user space
- Remove / rename nxsched_get_streams -> lib_getstreams
- Remove system call for nxsched_get_streams
The user stack is dependent on the user address environment. As the
process exits, this address environment is destroyed anyway, so the
stack does not need to be released separately.
There is also an issue with this when the process exits via exit(). The
problem is that the task group is released prior to this "up_release_stack()"
call along with the address environment, and trying to free the memory
either causes an immediate crash (no valid addrenv), or frees memory into
another process' heap (addrenv from a different process).
Signed-off-by: Ville Juven <ville.juven@unikie.com>
According to posix spec, this function should never return `EINTR`.
This fixes the call to `pthread_mutex_take` so it keeps retrying the
lock and doesn't return `EINTR`
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
add the task from the specified task list to reduce time consuming.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
TIMER_SETTIME(2)
NAME
timer_settime, timer_gettime - arm/disarm and fetch state of POSIX per-process timer
SYNOPSIS
#include <time.h>
int timer_settime(timer_t timerid, int flags,
const struct itimerspec *new_value,
struct itimerspec *old_value);
int timer_gettime(timer_t timerid, struct itimerspec *curr_value);
...
ERRORS
...
EINVAL timerid is invalid.
Signed-off-by: chao an <anchao@xiaomi.com>
because if we pass predefined environment variables table explicitly,
the environment variables created by the board code will be lost.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit is intended to solve the bug caused by #7159.
It will fixed data abort issue when task restart in wait sem status.
If delete waitobj in the sem recover function, then we will get the wrong
task list when remove the task from task list.
1.Don't include unwind.h when arch specific backtrace is enable
2.Built arch specific backtrace wrapper only when enable
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Optimize sched_note_begin/end, replace note_printf with note_string
sched_note_begin/end optimized from 50us to 1us per consumption
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Situation:
Assume we have 2 cpus, and busy run task0.
CPU0 CPU1
task0 -> task1 task2 -> task0
1. remove task0 form runninglist
2. take task1 as new tcb
3. add task0 to blocklist
4. clear spinlock
4.1 remove task2 form runninglist
4.2 take task0 as new tcb
4.3 add task2 to blocklist
4.4 use svc ISR swith to task0
4.5 crash
5. use svc ISR swith to task1
Fix:
Move clear spinlock to the end of svc ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
reason:
1. g_running_tasks = thread A
2. thread A exit (free thread A's tcb) -> thread B
3. thread B interrupt by irq
4. check g_running_tasks->flags -> kasan report used after free
rootcause:
g_running_tasks has't set completely when syscall hanppened
Resolve:
Use rtcb (get at ISR begining) instead
Signed-off-by: ligd <liguiding1@xiaomi.com>
There one ways can caused this:
mq_timedreceive
TIMER IRQ do wd_timer -> wd_func1 mq_send
-> wd_func2 nxmq_rcvtimeout -> crash
Resolve:
Stop the watchdog when mq_send
Signed-off-by: ligd <liguiding1@xiaomi.com>
it inappropriate to apply volatile to the task list:
1.The code access task list is already protected by critical section
2.The queue is complex struct, it isn't enough to protect by volatile
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
because not all compiler support the weak attribute, and
many features are either always used or guarded by config.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
strlcpy ensure the destination is NUL-terminated, and also fix warning:
```c
task/task_prctl.c:138:15: warning: 'strncpy' output may be truncated copying 30 bytes from a string of length 31 [-Wstringop-truncation]
138 | strncpy(name, tcb->name, CONFIG_TASK_NAME_SIZE - 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
1.Forward nxsched_process_cpuload to nxsched_process_cpuload_ticks directly
2.Define the dummy nxsched_process_cpuload_ticks when CPULOAD isn't enabled
3.Remove the weak attribute from nxsched_process_cpuload_ticks
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
D:\code\incubator-nuttx\sched\pthread\pthread_create.c(154,22):
warning C4189: “pjoin”: local variable is initialized but not referenced
[D:\code\incubator-nuttx\vs20221\sched\sched.vcxproj]
D:\code\incubator-nuttx\sched\group\group_setupidlefiles.c(61,28):
warning C4189: “group”: local variable is initialized but not referenced
[D:\code\incubator-nuttx\vs20221\sched\sched.vcxproj]
Reference:
https://docs.microsoft.com/en-us/cpp/error-messages/compiler-warnings/compiler-warning-level-4-c4189?view=msvc-170
Signed-off-by: chao.an <anchao@xiaomi.com>
and remove CONFIG_LIBC_LONG_LONG option to simplify the usage.
note: the size will increase 668
before change:
text data bss dec hex filename
168440 348 4480 173268 2a4d4 nuttx
after change:
text data bss dec hex filename
169108 348 4480 173936 2a770 nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
clock/clock_settime.c: In function ‘clock_settime’:
clock/clock_settime.c:120:45: warning: passing argument 1 of ‘clock_timekeeping_set_wall_time’
discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
120 | ret = clock_timekeeping_set_wall_time(tp);
| ^~
In file included from clock/clock_settime.c:37:
sched/clock/clock_timekeeping.h:40:58: note: expected ‘struct timespec *’
but argument is of type ‘const struct timespec *’
40 | int clock_timekeeping_set_wall_time(FAR struct timespec *ts);
|
Signed-off-by: chao.an <anchao@xiaomi.com>
The "p" format specifier already prepends the pointer address with
"0x" when printing.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
