Commit Graph

42 Commits

Author SHA1 Message Date
chao an
a8d3286258 net: move device buffer define to common header
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-28 00:32:16 -04:00
chao.an
3b69d09c80 net/udp/icmp: correct the unreadchable handling
Reference RFC1122:
https://datatracker.ietf.org/doc/html/rfc1122
----------------------------------------------

4.1.3  SPECIFIC ISSUES

  4.1.3.1  Ports

    If a datagram arrives addressed to a UDP port for which
    there is no pending LISTEN call, UDP SHOULD send an ICMP
    Port Unreachable message.

Signed-off-by: chao.an <anchao@xiaomi.com>
2021-11-26 08:47:54 -06:00
Alin Jerpelea
8975a65197 net: fix nxstyle errors
fix errors reported by nxstyle

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-04-02 11:12:25 -05:00
Gregory Nutt
a52ceac13e net/: Now handles reception of IPv4 packets with larger IPv4 headers containing options. 2019-08-31 12:25:30 -06:00
Gregory Nutt
1346f29151 net/: Fix alignment and spacing problems found by tools/nxstyle. 2019-07-02 18:02:23 -06:00
Gregory Nutt
69056d4053 net/: The value ERROR should never be returned from internal OS functions. That is reserved for returning values to appliations with the errno value set. Within the OS, errors are returned with a negated errno value ALWAYS. 2019-02-14 15:38:36 -06:00
Gregory Nutt
42a018747e net/devif, net/tcp, and net/udp: Extend the logic of 6c0ab0e077 so that all support Transport protocols support by IPv6 can handle the presence of IPv6 header extension options. 2018-11-02 17:50:01 -06:00
Gregory Nutt
fb8cf9373c net/udp: Resolve race condition in connection-less UDP sockets with read-ahead buffering.
In connection-mode UDP sockets, a remote address is retained in the UDP connection structure.  This determines both there send() will send the packets and which packets recv() will accept.

This same mechanism is used for connection-less UDP sendto:  A temporary remote address is written into the connection structure to support the sendto() operation.  That address persists until the next recvfrom() when it is reset to accept any address.

When UDP read-ahead buffering is enabled, however, that means that the old, invalid remote address can be left in the connection structure for some time.  This can cause read-ahead buffer to fail, dropping UDP packets.

Shortening the time between when he remote address is reset (i.e., immediately after the sendto() completes) is not a solution, that does not eliminate the race condition; in only makes it smaller.

With this change, a flag was added to the connection structure to indicate if the UDP socket is in connection mode or if it is connection-less.  This change effects only UDP receive operations:  The remote address in the UDP connection is always ignored if the UDP socket is not in connection-mode.

No for connection-mode sockets, that remote address behaves as before.  But for connection-less sockets, it is only used by sendto().
2018-05-13 09:57:34 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
0b2a4eb4bd Networking: A little more wording changes related to interrupts vs. events 2017-08-29 15:08:38 -06:00
Gregory Nutt
799b2d5671 Update comments. 2017-07-17 07:14:12 -06:00
Gregory Nutt
d9a2a3c3f1 Networking: When upd_input() cannot process a packet, it returns ERROR so that network drivers may try calling ipv4_input() later. In this case, it must also set d_len to zero. Otherwise, all network drivers will assume tht there is also an outgoing packet. This results in a gratuitous ARP. 2017-07-17 06:50:39 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
7d0950bb22 net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors. 2016-06-12 07:09:37 -06:00
Gregory Nutt
f4fcdcdb4d net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 17:37:21 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
c98f00a93b Update comments; trivial addtion to a document. 2016-06-10 09:36:59 -06:00
Gregory Nutt
9ff645a298 drivers/ieee802154: Add a skeleton IEEE802154 driver 2016-02-25 15:11:30 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
af71b7a1ed Networking: Eliminate a warning with UDP checksums are suppressed 2015-01-23 11:42:12 -06:00
Gregory Nutt
f4ce875711 Networking: Fix issues with UDP packet length and checksum calculations when IPv6 is selected 2015-01-23 09:33:18 -06:00
Gregory Nutt
2c251d845c include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received.
net/socket, net/tcp, net/udp:  Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet.  This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934 Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary 2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6 Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value. 2015-01-16 15:03:10 -06:00
Gregory Nutt
630366272a Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header. 2015-01-15 15:06:46 -06:00
Gregory Nutt
aa9700c1ab Update comments and read me 2014-11-23 12:52:18 -06:00
Gregory Nutt
2e55db369d Network: All logic will now handle varialbe length link layer protocol headers within incoming packets. This permits use of multiple network interfaces with differing data links. For example, ETHERNET + SLIP 2014-11-15 13:13:23 -06:00
Gregory Nutt
73f3ecf7e2 NET: Rename network interrupt event flags more appropriately: TCP_, UDP_, ICMP_, or PKT_ vs UIP_ 2014-07-06 17:22:02 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
5790c94ba3 Rename net/uip to net/devif. Rename uip/uip.h to devif/devif.h 2014-06-28 18:07:02 -06:00
Gregory Nutt
50b749a636 Clean-up naming associated with network checksums 2014-06-27 17:51:32 -06:00
Gregory Nutt
fce2a79abd Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
e1091251e6 NET: Move statistcs from uip.h to new netstats.h to remove nasty circular inclusion problem. 2014-06-26 09:32:39 -06:00
Gregory Nutt
abf04708ce Clean up all UDP-related naming 2014-06-24 18:55:01 -06:00
Gregory Nutt
5d1f8180d4 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
626469e30c Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
382920b9a9 Move UDP files from net/uip to net/udp 2014-06-18 10:50:09 -06:00