Commit Graph

3076 Commits

Author SHA1 Message Date
Gregory Nutt
76f925cc4a Various changes associated with symbol tables. Most from Pelle Windestam 2014-06-27 08:14:07 -06:00
Gregory Nutt
1946e0c6c9 Fix Kconfig typo 2014-06-27 07:07:59 -06:00
Gregory Nutt
654fd5ff2d Setup the SAMA5D4-EK NSH configuration to use the DRAMBOOT loader by default 2014-06-26 17:04:53 -06:00
Gregory Nutt
2be17d64b3 SAMA5D4-EK: Add bootloader that runs from ISRAM and loads an Intel HEX file into DRAM 2014-06-26 16:42:06 -06:00
Gregory Nutt
adaa6ea87f SAMA5D4: Add configuration to redirect all interrupts to the AIC 2014-06-26 11:51:39 -06:00
Gregory Nutt
bbcdf15eea TCP Read-Ahead: Convert to use I/O buffer chains 2014-06-24 15:38:00 -06:00
Gregory Nutt
03a4890a5f Add support for the LPCXpresso's RTC, ADC, DAC, Timer, PWM, and MCPWM. All form Max 2014-06-23 12:13:52 -06:00
Gregory Nutt
68c56bfa37 Fix typos from previous commit to fix button interrupts 2014-06-22 08:11:57 -06:00
Gregory Nutt
5f5e015d00 SAMA5D4: Add support for secure/FIQ interrupts; SAIC supports need to be be enabled unconditionally 2014-06-20 18:16:41 -06:00
Gregory Nutt
776640edfb SAMA5D4: Add partial support for secure interrupt controller (SAIC) 2014-06-20 15:22:00 -06:00
Gregory Nutt
37d6366f08 SAMA5D4: USART peripheral clock appears to be MCK/2 2014-06-20 11:40:36 -06:00
Gregory Nutt
76d18267b1 SAMA5D4-EK: Get ramtest clocking up to 528MHz 2014-06-20 11:37:06 -06:00
Gregory Nutt
02591c509b SAMA5D4-EK: Make sure that the H32MX divider is set; correct sense of bit driver red LED 2014-06-20 10:33:33 -06:00
Gregory Nutt
e3da5552b3 SAMA5D4: Initial bring-up fixes 2014-06-19 14:16:36 -06:00
Gregory Nutt
0a5c35c3bb Costmetic update to comments/README file 2014-06-18 17:40:06 -06:00
Gregory Nutt
151d84709f SAMA5D4: Fix ISRAM base address: 0x00200000, not like the SAMA5D3 SRAM at 0x00300000 2014-06-18 13:03:10 -06:00
Gregory Nutt
b013a0fa48 Several other interrupt button implementations had the same problem as did the sam4s-xplained 2014-06-15 12:55:48 -06:00
Gregory Nutt
4bac220b77 SAM4S Xplained (both): Button interrupts not being disabled after being detached 2014-06-15 12:43:33 -06:00
Gregory Nutt
dff01c3166 SAMA5D4-EK: Add an SDRAM test configuration 2014-06-14 13:11:42 -06:00
Gregory Nutt
66b0a121f1 SAMA5D4: Implement SDRAM initialization 2014-06-14 10:42:26 -06:00
Gregory Nutt
24249ed6ab SAMA5D4: Fix some memory remapping issues; updates to comments and README files 2014-06-14 08:02:58 -06:00
Gregory Nutt
74a4151945 Cosmetic update to comments 2014-06-11 14:57:14 -06:00
Gregory Nutt
b4607cc444 SAMA5D4: Add support for HSMCI1 power control pin 2014-06-11 14:55:51 -06:00
Gregory Nutt
57da49beb3 SAMA5D4-EK: Update pins used by HSMCI 2014-06-11 14:45:01 -06:00
Gregory Nutt
1634a11bd0 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
962694b5f0 Updates to get the SAMA5D3 building again 2014-06-10 15:34:57 -06:00
Gregory Nutt
ae142009da SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently 2014-06-09 12:16:16 -06:00
Gregory Nutt
a7afdd8e0d SAMA5D4: Completes PMC modifications for the SAMA5D4 2014-06-09 07:55:51 -06:00
Gregory Nutt
895851314f Updated SAMA5 SFR header file for the SAMA5D4 2014-06-08 07:48:36 -06:00
Gregory Nutt
24af2deb30 Update SAMA5D4-EK PIO usage 2014-06-07 09:37:17 -06:00
Gregory Nutt
ad1701d0f9 SAMA5D4: Various changes to get the SAMA4D-EK to build 2014-06-06 15:39:40 -06:00
Gregory Nutt
e8f8d3f521 Add board support for the SAMA5D4-EK 2014-06-06 12:37:36 -06:00
Gregory Nutt
ae01e0819d SAMA5: Cosmetic clean-up of README files 2014-06-04 17:02:30 -06:00
Gregory Nutt
70207e05e3 SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC 2014-06-04 12:04:24 -06:00
Gregory Nutt
1bc6613e41 Add support for the Olimex STM32 h405. From Martin Lederhilger 2014-06-03 10:34:36 -06:00
Gregory Nutt
116d9ef297 Update ChangeLog 2014-06-02 07:50:16 -06:00
Gregory Nutt
08fc1a1abf Update viewtools/nsh configuratin 2014-05-23 07:59:38 -06:00
Gregory Nutt
f3df5f2bb5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
43f9282517 SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled 2014-05-15 11:41:58 -06:00
Gregory Nutt
160fbc711a Misc changes while testing the SAM4E-EK LCD (still does not work) 2014-05-14 15:31:38 -06:00
Gregory Nutt
5f6da749bb SAM4E-EK: Ooops.. two touchscreen drivers(?) 2014-05-14 10:56:03 -06:00
Gregory Nutt
296db40aeb SAM4E-EK: Add a touchscreen driver (untestd on initial checkin) 2014-05-13 11:28:38 -06:00
Gregory Nutt
6a943baa91 SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing) 2014-05-13 10:38:46 -06:00
Gregory Nutt
c1d98aeb35 SAM4E: PIO definition clean-up 2014-05-12 18:42:25 -06:00
Gregory Nutt
85c2c33c53 Add ILI9325 register definition header file 2014-05-12 11:24:57 -06:00
Gregory Nutt
d287c30bdf Make sure apps/examples/pashello still builds; update comments; refresh configurations 2014-05-09 10:33:23 -06:00
Gregory Nutt
dc80d84264 Create P-Code execution helper in apps/interpreters/prun; The P-Code binary format is functional except that there are still some modularity and kernel build issues that need to be addressed. 2014-05-09 08:52:11 -06:00
Gregory Nutt
b28d3124dd Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
7685acc934 BINFMT: A framework to support a P-code binary format (a work in progress) 2014-05-07 13:47:52 -06:00
Gregory Nutt
bb5f545173 STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
bf623f4981 Nucleo-F401RE: Delay loop calibrated 2014-05-06 17:30:44 -06:00
Gregory Nutt
35bb403142 Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working. 2014-05-06 11:07:10 -06:00
Gregory Nutt
bd7b376e57 The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock 2014-05-06 10:01:02 -06:00
Gregory Nutt
f7934fdd3a STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented 2014-05-05 17:59:07 -06:00
Gregory Nutt
810e929841 SAM4S Xplained Pro: Clean-up of LED usage and also some integration of new timer features. From Bob Doiron 2014-05-05 14:38:29 -06:00
Gregory Nutt
370703194e Updated Nucleo-F401RE configuration 2014-05-05 13:47:21 -06:00
Gregory Nutt
2dbaed4779 The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name 2014-05-05 08:52:02 -06:00
Gregory Nutt
99d40a19a3 Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed 2014-04-30 16:12:36 -06:00
Gregory Nutt
c3a6acee18 If the CPU load measurements are being driven by an external clock, then the prototype for sched_process_cpuload() must be available in include/nuttx/arch.h 2014-04-30 15:47:55 -06:00
Gregory Nutt
7614f7762e The CONFIG_SYSTEMTICK_EXTCLK selection should only be available on systems that support it 2014-04-30 15:32:06 -06:00
Gregory Nutt
3889b3b65c SAM4S Xplained Pro build fixes 2014-04-30 15:23:40 -06:00
Gregory Nutt
483a3e9b74 Refresh SAM4S Xplained Pro configuration 2014-04-30 15:10:20 -06:00
Gregory Nutt
3bf6241662 Simplified optimization for the SAM4E-EK 2014-04-30 15:04:34 -06:00
Gregory Nutt
a6211ef21d Nucleo-F401RE: Has only one memory region, not two 2014-04-30 14:56:39 -06:00
Gregory Nutt
e9281c14b3 Updated system timer logic from Bob Doiron 2014-04-30 14:47:30 -06:00
Gregory Nutt
bc162a6c76 Updated system timer logic from Bob Doiron 2014-04-30 14:46:26 -06:00
Gregory Nutt
52583de4cf The SAM4S Xplained Pro now uses the extended timer/counter features. From Bob Doiron. 2014-04-30 14:11:53 -06:00
Gregory Nutt
c528079853 SAM4S Xplained Pro: update LED conrol logic. From Bob Doiron 2014-04-30 14:05:44 -06:00
Gregory Nutt
e346b1e8d3 Nucleo-F401RE: Fix memory usage 2014-04-30 08:20:30 -06:00
Gregory Nutt
6f3e0d5cfb Nucleo-F401RE: Board GPIOs updated by Frank Bennett 2014-04-29 08:10:27 -06:00
Gregory Nutt
943b083de9 Final prep for NuttX-7.2 release 2014-04-28 10:53:24 -06:00
Gregory Nutt
90cbc964df STM32: More places where up_prioritize_irq is called when CONFIG_ARCH_IRQPRIO is not defined. Sourceforge ticket #26 2014-04-28 07:07:47 -06:00
Gregory Nutt
e9c563eb76 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
023f612654 Minor updates to READMEs and comments 2014-04-27 11:38:24 -06:00
Gregory Nutt
6fd6d03aae Zneo: Misc minor updates from debugging 2014-04-26 12:42:44 -06:00
Gregory Nutt
29bceb1d41 ZNeo Serial: Need to configure UART1 alternate function 2014-04-26 09:43:40 -06:00
Gregory Nutt
994fb3682e Zneo Serial: Fix cut'n'paste error in some conditional configuration 2014-04-26 08:23:11 -06:00
Gregory Nutt
ba7f398cd6 ZNeo: update calibration 2014-04-25 12:38:56 -06:00
Gregory Nutt
31630c88a6 Zneo: Updated patch. Found another compiler failure 2014-04-25 12:02:08 -06:00
Gregory Nutt
7dac8a1360 Updates to ZNeo configurations + misc cosmetic changes to comments 2014-04-25 11:59:17 -06:00
Gregory Nutt
6ecb50cd3c Nucleo-F401RE: Remove FRAM references 2014-04-25 11:07:38 -06:00
Gregory Nutt
db0c11d550 16z: Reduce size of stacks 2014-04-25 09:56:07 -06:00
Gregory Nutt
96c0b82875 Nucleo: Remove bogus MPU definitions 2014-04-25 08:52:50 -06:00
Gregory Nutt
15026b0454 Updated README files 2014-04-25 07:23:31 -06:00
Gregory Nutt
9a73ed6429 Minor and cosmetic changes from initial 16z (v2) bringup 2014-04-24 15:55:53 -06:00
Gregory Nutt
a1a6ef403e Nucleo-F401RE update from Frank Bennett 2014-04-22 16:04:14 -06:00
Gregory Nutt
3707550b54 SAM4S Xplained Pro fixups from Bob DOIRON after the last big set of commits 2014-04-22 14:34:17 -06:00
Gregory Nutt
799d21c673 Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
Gregory Nutt
180dbe28c4 Nucleo-F401RE: Add standard, NuttX button support 2014-04-22 13:09:34 -06:00
Gregory Nutt
55d069360a Nucleo-F401RE: Use standard NuttX LED interfaces 2014-04-22 12:55:31 -06:00
Gregory Nutt
ece70549de Nucleo F401RE: Remove PX4 cruft that can in with the port 2014-04-22 12:18:08 -06:00
Gregory Nutt
dc42bc06fa Back out a bad change in the last commit + add missing SAM4S Xplained Pro file 2014-04-22 11:04:31 -06:00
Gregory Nutt
84a7f2d61e Misc changes to get a clean compilation after incorporating all of Bob Doison's changes 2014-04-22 10:38:08 -06:00
Gregory Nutt
daf10faa71 SAM4X Xplained Pro board configuration updated by Bob Doison 2014-04-22 09:38:46 -06:00
Gregory Nutt
44173905cb Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
f42c357654 examples/cpuhog and serialblaster from Bob Doiron 2014-04-22 07:52:08 -06:00
Gregory Nutt
ca2c794acd Misc SAM4S-related changes from Bob Doison 2014-04-21 19:32:15 -06:00
Gregory Nutt
78c2f88fef SAM4S Xplained Pro: Watchdog timer support for Bob Doison 2014-04-21 19:19:56 -06:00
Gregory Nutt
b5c7f41c5d SAM4S Xplained: Add logic to autostart the USB monitor 2014-04-21 18:16:44 -06:00
Gregory Nutt
349ba4b7a5 SAM4S Xplained: Boot PPLLA to 2450MHz to support USB 2014-04-21 18:15:55 -06:00