According to the mmap(2) specification, anonymous pages should be initialized to zero unless the MAP_UNINITIALIZED is specified.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit add MADV_HUGEPAGE and MADV_NOHUGEPAGE definitions for madvise. Notice that none of these flags have been implemented yet.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
coresight_claim_device will fail when unregister device
which has been enabled. device should be the init state when
it is unregistered.
Signed-off-by: liaoao <liaoao@xiaomi.com>
64-by-32-bit divisions are prominent in the NuttX, even on 32-bit
machines. Luckily, many of them use a constant divisor that allows
for a much faster multiplication by the divisor's reciprocal.
The compiler already performs this optimization when compiling a 32-by-32
division with a constant divisor. Unfortunately, on 32-bit machines, gcc
does not optimize 64-by-32 divisions in that case, except for constant
divisors that happen to be a power of 2.
Let's avoid the slow path whenever the divisor is constant by manually
computing the reciprocal ourselves and performing the multiplication
inline. In most cases, this improves performance of 64-by-32 divisions
by about two orders of magnitude compared to the __div64_32() fallback,
especially on architectures lacking a native div instruction.
Signed-off-by: ligd <liguiding1@xiaomi.com>
CID 1266677: (#2 of 2): Use 32-bit time_t (Y2K38_SAFETY)
1. declaration_with_small_time_t: Declare use of time_t, which is defined as 32 bits wide on this platform, while the minimum safe width is 64.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit refactors the wdog module to use absolute time representation internally. The main improvements include:
1. Fixed recursive watchdog handling caused by calling wd_start within watchdog timeout callback function.
2. Simplified timer processing to improve performance and enhance code readability.
3. Improved accuracy of timers.
4. Reduced critical section and interrupt disable time, improving real-time performance.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
reason:
In SMP, when a context switch occurs, restore_critical_section is executed.
To reduce the time taken for context switching, we directly pass the required
parameters to restore_critical_section instead of acquiring them repeatedly.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
In the SMP, when a context switch occurs, restore_critical_section is executed.
In order to reduce the time taken for context switching,
we inline the restore_critical_section function.
Given that restore_critical_section is small in size
and is called from only one location, inlining it does not increase the size of the image.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add new driver frameworks: force feedback for vibrator, like linux,
unify vendor vibrator driver using.
Incorporating a force feedback-based driving framework to replace the
conventional driver/motor setup for controlling vibrators not only
enhances the precision and responsiveness of the haptic feedback but
also aligns better with the advancements in Linux-based driver systems.
refs docs link: https://www.kernel.org/doc/html/v4.19/input/ff.html
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Add common ivshmem driver, provide the ivshmem bus mechisam, so
many ivshmem based driver can change to pci_ivshmem based
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Rptun is a rptun fremework driver base on the Inter-Virtual Machine
Share Memory Device.
With this driver, two NuttX runs in different QEMU can communicate
with each other by the rpmsg api.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
We can see them in ifconfig:
ap> ifconfig
wlan0 Link encap:Ethernet HWaddr 42:64:7f:b3:12:03 at UP mtu 1500
inet addr:10.0.1.2 DRaddr:10.0.1.1 Mask:255.255.255.0
inet6 DRaddr: ::
RX: Received Fragment Errors Bytes
00000b9b 00000000 00000000 21daf5
IPv4 IPv6 ARP Dropped
00000a33 00000137 00000031 00000000
TX: Queued Sent Errors Timeouts Bytes
00000ac4 00000ac4 00000000 00000000 1a2103
Total Errors: 00000000
Signed-off-by: meijian <meijian@xiaomi.com>
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
BOARDIOC_SPINLOCK can support the combined semantics
of disabling interrupts (irq), trylock, and spinlock.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Change the qmeu pci test code for new pci driver framework
Signed-off-by: yangshuyong <yangshuyong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Signed-off-by: lipengfei28 <lipengfei28@xiaomi.com>
Since pthread_mutex is implemented by sem, it is impossible to see in ps who holds the lock and causes the wait.
Replace sem with mutex implementation to solve the above problems
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
reason:
spin_initialize is often used to release a lock,
and if we don't include a memory barrier,
it may lead to the lock being released prematurely.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
These interfaces are used when we assign interrupt
handling of the same priority to the corresponding priority work queues.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add TUNSETCARRIER ioctl, then we may change the carrier state of TUN dynamically. Note that we don't need an ioctl for getting carrier, it can be done by SIOCGIFFLAGS already.
Ref: https://github.com/torvalds/linux/blob/v6.10/drivers/net/tun.c#L3374-L3380
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
CC: serial/serial_io.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/power/regulator.h", line 227: warning #231-D:
declaration is not visible outside of function
int regulator_gpio_init(FAR struct ioexpander_dev_s *iodev,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
This is a memory monitoring interface implemented with reference to Linux's PSI (Pressure Stall Information),
which can send notifications when the system's remaining memory is below the threshold.
The following example code sets two different thresholds.
When the system memory is below 10MB, a notification is triggered.
When the system memory is below 20 MB, a notification (POLLPRI event) is triggered every 1s.
```
int main(int argc, FAR char *argv[])
{
struct pollfd fds[2];
int ret;
if (argc == 2)
{
char *ptr = malloc(1024*1024*atoi(argv[1]));
printf("Allocating %d MB\n", atoi(argv[1]));
ptr[0] = 0;
return 0;
}
fds[0].fd = open("/proc/pressure/memory", O_RDWR);
fds[1].fd = open("/proc/pressure/memory", O_RDWR);
fds[0].events = POLLPRI;
fds[1].events = POLLPRI;
dprintf(fds[0].fd, "%llu -1", 1024LLU*1024 * 10);
dprintf(fds[1].fd, "%llu 1000000", 1024LLU*1024 * 20);
while (1)
{
ret = poll(fds, 2, -1);
if (ret > 0)
{
printf("Memory pressure: POLLPRI, %d\n", ret);
}
}
return 0;
}
```
https://docs.kernel.org/accounting/psi.html
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
"/home/guoshichao/work_profile/vela_os/vela_car_4/nuttx/include/nuttx/net/netdev.h", line 493: warning #231-D:
declaration is not visible outside of function
FAR struct netdev_ifaddr6_s *addr,
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1.Add sign to indicate negative and positive
2.Fix case where there are negative numbers in the operation
3.expand to 512 bytes to support rsa2048
Signed-off-by: makejian <makejian@xiaomi.com>
(1) RSA_PKCS15_VERIFY Misspell
(2) if iv not provided during decryption, iv should get from data.
It was not discovered before because all symmetric decryption comes with iv.
Signed-off-by: makejian <makejian@xiaomi.com>
Some macro definitions have already been defined in other header files, redundant macro definitions have been removed in include/nuttx/can.h. Align some code. Remove no use struct (can_response_s) and some variables.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Summary:
Indicate whether the file is currently locked by adding a new field locked to filep.
0 - Unlocked
1 - Locked
The status of the filep at close is used to determine whether to continue with the following procedure.
Optimizing performance:
Before
Time taken to close the file: 33984 nsec
After
Time taken to close the file: 23744 nsec
Improvement of about 10 msec
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
Because stdio.h references stdatomic.h in MVSC, it internally declares mbstate_t, leading to redeclarations during compilation.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
This change mainly appears in the compilation environment of MVSC
Since MVSC supports the c++11 standard in VS2019 preview3 (https://en.cppreference.com/w/cpp/compiler_support/11), we can do static initialization using the c++11 approach
atomic_int a = 1
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. use nuttx/atomic.h instead of stdatomic
2. remove CONFIG_HAVE_ATOMIC,because we now support atomic on all platforms
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modify the conditions for entering different include header files
2.Added pre-definition for _Atomic _Bool when it is missing
3.Added nuttx for stdatomic implementation. When toolchain does not support atomic, use lib/stdatomic to implement it
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. Add nuttx/atomic.h in include
2. Use nuttx/atomic.h instead of stdatomic.h in the nuttx directory
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
remove alist, switch to a convenient way to traverse
the physical address directly.
At the same time, we can use `gurad` to mark whether
it is free or alloc or out of bounds check
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
pm process should be done by chip specific, but we can provide a standard
flow, then vendor & chip can only focus on handle different state change.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
when the vsync comes, fb drivers should call fb_vsync_pollnotify to notify POLLPRI, so that users can catch the synchronization time of vsync and do something.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Summary:
1.Remove the macro definition of getnproc in sysinfo
2.New get_nprocs_conf and get_nprocs interfaces, return CONFIG_SMP_NCPUS, return 1 when not defined
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
optimize the interaction flow associated with network drivers to reduce
the amount of code and improve compatibility
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
