sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31,642 Commits 1 Branch 0 Tags 291 MiB
43390c78ea
Commit Graph

10634 Commits

Author SHA1 Message Date
Gregory Nutt
43390c78ea configs: Since the touch screen initialization is now called from one-time board-initialization logic, it no longer needs protection from re-entry. 2018-01-17 10:14:03 -06:00
Gregory Nutt
301bf1ee77 This commit eliminates the BOARDIOC_TSCTEST_SETUP command. 
Squashed commit of the following:

    configs:  Each board now initializes the touchscreen controller as a normal part of its board bring-up.  board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
    Remove all support for BOARDIOC_TSCTEST_SETUP
    Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
 2018-01-17 09:33:28 -06:00
Gregory Nutt
e276d4d16d Remove the BOARDIOC_TSCTEST_TEARNDOWN boardctl() command. Remove all implementations of board_tsc_teardown() (the were all stubs anyway except for the simulation). 2018-01-16 18:03:21 -06:00
Fanda
53db5c80f3 Merged in fvacek/nuttx (pull request #572) 
Fixed nucleo-l432kc broken build when CONFIG_USERLED_LOWER defined

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-16 23:33:58 +00:00
Gregory Nutt
c67de1f114 configs/lpcxpresso-lpc54628: Add pin definitions for USART, I2C, and SPI on the Arduino Uno connector. 2018-01-16 11:48:36 -06:00
Juha Niskanen
802f146781 configs/nucleo-* and configs/stm32l476vg-disco: Fix more stm32_userleds.c bogus logic 2018-01-16 07:20:41 -06:00
Gregory Nutt
a30ccce7ce configs/nucleo-l432kc/src: Fix some bogus logic noted by Fanda. 2018-01-15 18:22:29 -06:00
Gregory Nutt
8f94ce46f9 arch/arm/src/lpc54xx: The basic SPI driver is code complete but still untested. This driver is 'basic' in that in only supports polled mode operations. 2018-01-14 12:09:26 -06:00
Gregory Nutt
fdf4e40b6a configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations. 2018-01-13 08:34:58 -06:00
Gregory Nutt
0eca2c6fef Update README files 2018-01-11 07:28:12 -06:00
Masayuki Ishikawa
48b7f9b807 configs/lc823450-xgevk: Update defconfigs 
Apply the latest Kconfig to all configurations.
Enable DVFS in audio and rndis. Add telnet character mode to rndis.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 16:16:03 +09:00
Masayuki Ishikawa
5029aa7e8c configs/lc823450-xgevk: Enable DVFS in lc823450_bringup.c 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 16:16:00 +09:00
Masayuki Ishikawa
ea19abd291 configs/lc823450-xgevk: Update README.txt 
Add notes on DVFS (Dynamic Voltage and Frequencey Scaling)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 16:15:27 +09:00
Gregory Nutt
eef1276565 configs/stm32f103-minimum: Remove nonsensical #error. 2018-01-09 11:17:01 -06:00
Gregory Nutt
c367a223c5 Update README 2018-01-09 07:20:39 -06:00
Gregory Nutt
7d4451ee86 Squashed commit of the following: 
configs/flipnclick-pic32mz:  Switch the serial console to UART4.  Clean up some minor issues the LED options.
    configs/flipnclick-pic32mz:  Add support for two on-board buttons:  T1 and T2.
    configs/flipnclick-pic32mz:  Adds basic board support for the Mikroe Flip&Click PIC32MZ board.  Initial commit is just the configs/pic32mz-starterkit with some name chanages.
 2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c Squashed commit of the following: 
arch/mips/src/pic32mz:  Commits the basic architecture port for the PIC32MZEF.
    arch/mips/src/pic32mz:  Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
    arch/mips/include/pic32mz:  Add support for the PIC32MZEF family.
 2018-01-08 10:01:23 -06:00
Gregory Nutt
a0aec8ccde configs/stm32f103-minimum: Add file that was included in the last patch. 2018-01-07 12:17:15 -06:00
Gregory Nutt
4227d11b6c configs/flipnclick-sam3x: Update README and some comments. 2018-01-07 11:07:39 -06:00
Gregory Nutt
bc320c7878 configs/arduino-due and flipnclick-sam3x: Enable PROCFS in nsh configurations. 2018-01-06 17:54:48 -06:00
Alan Carvalho de Assis
20c11e918f configs/stm32f103-minimum: Add AT24 EEPROM support on STM32F103-Minimum board 2018-01-06 17:10:32 -06:00
Gregory Nutt
ed18e427f3 Squashed commit of the following: 
configs/flipnclick-sam3x:  Add support for the 4 user-controllable LEDs on the board.
    configs/flipnclick-sam3x:  Add board support for the Mikroe Flip&Click SAM3X.
    configs/arduino-due:  Update this old configuration so that it is structured a little more like recent board support.
 2018-01-06 17:06:50 -06:00
Gregory Nutt
0253c974b2 Squashed commit of the following: 
fs/nxffs:  Giving up on truncate() support in NXFFS for now.  There is too much that has to be done to make that work.
    configs/sim:  Add support for testing NXFFS.
 2018-01-06 13:32:32 -06:00
Gregory Nutt
17cedb6b20 Squashed commit of the following: 
fs/smartfs:  Add logic needed to ftruncate to shrink a file to any arbitrary size.
    fs/smartfs:  Repartition some functionality to better fit in new ftruncate features.
 2018-01-06 10:43:18 -06:00
Gregory Nutt
c85bc9e941 configs/sim: Add support for a RAM MTD driver and initialization for use with SmartFS. 2018-01-05 13:54:37 -06:00
Gregory Nutt
5d1a91fd8e configs/lpcxpresso-lpc5428/fb: Should disable pixel depths that are not being used. 2018-01-04 16:40:31 -06:00
Gregory Nutt
36cc4fc066 Fix saome warnings found in build testing. 2018-01-04 13:33:42 -06:00
Gregory Nutt
7d131fe711 Update TODO list 2018-01-03 08:32:57 -06:00
Gregory Nutt
e7db11fc55 arch/arm/src/lpc54xx: LPC54xx Ethernet driver no long depends on EXPERIMENTAL. 2018-01-02 11:17:25 -06:00
Gregory Nutt
d04f166d84 arch/arm/src/lpc54xx: Add some hooks for future 802.1q VLAN support. configs/lpcxpresso-lpc54628: Automatically bring up network in the netnsh configuration. 2018-01-02 08:49:09 -06:00
David Alessio
1be5d96c6e Merged in david_alessio/nuttx/add-FPU-to-ostest (pull request #562) 
Add FPU to xmc4 ostest

* remove +x from makefiles

* preserve .gdbinit across make clean

* add FPU support to ostest on xmc4

* add FPU test to ostest on xmc4

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-01-02 13:35:26 +00:00
Gregory Nutt
c3d3e91a3f arch/arm/src/lpc54xx: Correct handling of the Ethernet RBU error. With this fix, Ethernet now appears to be fully functional although still undertested. 2018-01-01 15:08:19 -06:00
Gregory Nutt
3c65be8c1a arch/arm/src/lpc54xx: Fix a few more Ethernet issues related to buffer management and address filtering. 2018-01-01 08:54:31 -06:00
Gregory Nutt
fd10eaf1fb arch/arm/src/lpc54xx: Fix several more issues in bring-up of Ethernet driver. Still not fully functional. 2017-12-31 17:16:21 -06:00
Gregory Nutt
f624c504d1 arch/arm/src/lpc54xx: Fixes a few more Ethernet bring up bugs. Rx seems to work; Tx does not. 2017-12-31 14:49:13 -06:00
Gregory Nutt
b2adb4917f arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however. 2017-12-31 11:11:57 -06:00
Gregory Nutt
f23fb9dd14 arch/arm/src/lpc54xx: Completes basic packet transfer logic for Ethernet drivers. Still some unfinished logic for IPv6 multicast logic and for various non-mainstream configurations. But it is ready for tested. configs/lpcxpresso-lpc54628: Add a netnsh configuration that will be used to test the Ethernet driver. Untested on initial commit. 2017-12-30 12:51:57 -06:00
Gregory Nutt
cb9e1e7716 arch/arm/src/lpc54xx: Add some Ethernet PHY initialization logic. 2017-12-27 12:01:24 -06:00
Gregory Nutt
f5c5f89592 arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54. 2017-12-26 12:55:58 -06:00
Gregory Nutt
edef041f93 arch/arm/src/lpc54xx: Add support for a random number generator. 2017-12-26 10:20:41 -06:00
Gregory Nutt
0b91074850 arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration. 2017-12-25 13:56:06 -06:00
Gregory Nutt
7e7bdd181f Cosmetic fixes to comments, README, and other trivial corrections. 2017-12-25 10:45:47 -06:00
Gregory Nutt
382989a1b9 arch/arm/src/lpc54xx: DMA driver is code compelete. Untested and still needs more review. 2017-12-24 14:28:39 -06:00
Gregory Nutt
321c524c5f arch/arm/src/lpc54xx: Add DMA register definition file and skeletal DMA driver. The initial commit of the DMA driver is simply the LPC43xx GPDMA driver with name changes and all all register access removed. 2017-12-24 10:55:46 -06:00
Gregory Nutt
7ce881051a lpc43/lpc54 SDMMC: Add missing test for response errors in interrupt handler. 2017-12-23 18:13:53 -06:00
Gregory Nutt
0a5d9af33c lpc43/54 SDMMC: Remove some useless code. lpc54: Fix typos in the IOCON register definition file. Lpcxpresso-Lpc54628: Fix typols in board.h file 2017-12-23 14:25:21 -06:00
Alan Carvalho de Assis
fa234a7026 configs/bambino-200e: Add LPC43 SDMMC board support to Bambino-200E and fix errors/warns 2017-12-22 12:30:36 -06:00
Alan Carvalho de Assis
3ce21c5fe1 arch/arm/src/lpc43xx: Fix some small issues on LPC43 SDMMC driver 2017-12-22 10:23:09 -06:00
Gregory Nutt
c431177c0f LPC54xx: Update a README; fix a error in a DEBUGASSERTION in the SDMMC driver. 2017-12-21 12:19:15 -06:00
Gregory Nutt
31db67cad7 arch/arm/src/lpc54xx: SDMMC pin configurations should have SLEW on and FILTER off. 2017-12-20 11:47:30 -06:00