- Logic that generates the low lever framebuffer renderers for the per-window framebuffers,
- The logic that picks off the per-window framebuffer updates from normal graphics device updates. This logic must update both the per-window framebuffer and the graphics device (from the framebuffer).
Squashed commit of the following:
graphics: Add logic to allocate the per-window framebuffer.
graphics: A few fragmentary thoughts on how a per-window framebuffer could be represented and allocated.
graphics: nx_openwindow() and nxtk_openwindow() now accept an addtional 'flag' parameter. This argument is not used at present but will, eventually enable a RAM backed, per-window framebuffer.
graphics/Kconfig: Add configuration to support a rambacked framebuffer. Current marked as EXPERIMENTAL because this is a work in progress.
Squashed commit of the following:
graphics/: Rename nxfe_reportposition to nxmu_reportposition. The is no longer an nxfe layer.
graphics/: Renmae nxfe_redrawreq to nxmu_redrawreq. The is no longer an nxfe layer.
graphics/nxmu/nxmu.h: Renmae nxfe.h to nxmu.h. There is no long an nxfe layer.
graphics/: Rename nxfe_state_s to nxmu_state_s. There is no longer an nxfe layer.
graphics/: Rename nxfe_conn_s to nxmu_conn_s. There is no longer an nxfe layer.
Add three patches about STM32 intherupts and network loopback files
* Add the missing macro STM32_IRQ_NIRQS used by ./arch/arm/src/stm32f7/stm32_irq.c
Signed-off-by: Kejun ZHOU <zhoukejun@outlook.com>
* The struct in_addr doesn't have the member sin_addr.
Signed-off-by: Kejun ZHOU <zhoukejun@outlook.com>
* The function lib_lo_ipv6match() is for IPv6.
Correct the function it calls from lib_lo_ipv4matchto() to lib_lo_ipv6match().
Also add CONFIG_NET_IPv6 for configuration.
Signed-off-by: Kejun ZHOU <zhoukejun@outlook.com>
libs/libc/pthread/pthread_spinlock.c: Resolve several TODO issues by accessing up_testset() via the boardctl() interface rather than attempting to call it directly.
configs/boardctl.c, include/sys/boardctl.h: Add access to architecture-specific up_testset() via boardctl().
arch/Kconfig's, sched/Kconfig, and include/nuttx/spinlock.h: Spinlocks are not available unless the architecture supports the up_testset() operation.
Fixed coding standard error in several files. Use of while( is incorrect; a space is required between while and (. Also ran tools/nxstyle and fix thoses complaints as well in most files.
Changes to comply with coding standard. Mostly focused on files with missing space after keyword in if(, switch(, and for(. Offending files also got changes to comply with tools nxstyle. If there were logs of nxstyle complaints, the file also got a taste of tools/indent.sh. Still need to fix occurrences of while( with missing space. There are a lot of them.
- Numbered arguments now work by using two pass parsing and an argument list.
The maximum number of numbered args is determined by CONFIG_LIBC_NL_ARGMAX
which is then copied into NL_ARGMAX.
- Size of pointer argument ('p') is determined before output.
include/limits.h: Define NL_ARGMAX (as well as some of the other 'invariant
values' per http://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html)
sched/init/nx_start.c: Add support for CONFIG_BOARD_DRIVER_INITIALIZE. If this option is selected then nx_start() will call a board-provided function board_driver_initialize() immediately after calling up_initialize().
Rename CONFIG_BOARD_INITIALIZE to CONFIG_BOARD_LATE_INITIALIZE.
Raname board_initialize() to board_late_initialize()
The previous implementation was probably corect. On Cygwin with GCC I see this:
int main(int argc, char **argv)
{
printf("Value 1.2 is: [%f]\n", 1.2);
printf("Value 0.1 is: [%f]\n", 0.1);
printf("Value 0.0: [%f]\n", 0.0);
printf("Value 347.6872: [%f]\n", 347.6872);
}
Generates output
Value 1.2 is: [1.200000]
Value 0.1 is: [0.100000]
Value 0.0: [0.000000]
Value 347.6872: [347.687200]
This reverts commit eb0223bc7f.
Author: Gregory Nutt <gnutt@nuttx.org>
TODO: Remove 'Missing fscanf()' bug
Clean up remaining complaints for tools/nxstyle
Apply tools/detab, rmcr, convert-comments, lowhex, and indent.sh to the new and highly modified files.
Author: Johannes <nivus.entwicklung@gmail.com>
- Move vscanf logic to lib_sscanf.c Switched to stream interface (tricky, because the old implementation used massive read ahead, which isn't suitable for streams, chars already read are gone).
- Added scanf and fscanf
- Added hh, h, and ll modifiers
- Fixes for standard compliance in scanf
- Fixes for standard compliance in strto... function family (don't consume single '-' or '+', allow sign in strotul(l))
Squashed commit of the following:
sched/sched/sched_getsockets.c: Fix an error in conditional compilation.
fs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NSOCKET_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
syscall/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
tools/: Fixups for CONFIG_NSOCKET_DESCRIPTORS no longer used to disable sockets.
Squashed commit of the following:
configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
Use STM32 DMA IP core version instead of chip family names and some minor improvements
arch/arm/src/stm32/chip/stm32_adc.h: raise error if two IP cores seleceted
libs/libdsp/Kconfig: cosmetic change
arch/arm/src/stm32/Kconfig: hide TIMER menu, HRTIM menu and USB Host debug menu if peripherals not enabled
configs/stm32f429i-disco/highpri/defconfig: fix configuration warning
Approved-by: GregoryN <gnutt@nuttx.org>
Pullreq libc libnx updates
* NuttX: make strerror() return 'Success' for 0
* NuttX: fix strrchr() so that it considers null terminator as part of string
From strrchr(3) man page:
"The terminating null byte is considered part of the string, so that if c
is specified as '\0', these functions return a pointer to the terminator."
* NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early.
It's easier to find the source when asserts fail already when freeing
an overflowed buffer, than if the corruption is only detected on next
malloc().
* MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs()
This is helpful for detecting uninitialized variables,
especially in C++ code. I seem to be forgetting to initialize
member variables and then they just get random values..
* NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen.
* nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also.
* NuttX: Fix kerning of 'I' in Sans17x22 font
The I character was running together with some other
characters, e.g. in sequence "IMI".
* NXMU: Revalidate window pointer for mouse events.
NXMU caches the previous window pointer so that further mouse
events can be sent to the same window. However, if the window
is destroyed while mouse button is held down, the pointer may
become invalid and cause a crash. This patch revalidates the
pointer before using it.
Approved-by: GregoryN <gnutt@nuttx.org>
1. Move exepath_*() related code to libc/misc
1. Rename exepath_ to envpath_
2. Rename BINFMT_EXEPATH to LIB_ENVPATH
libs/libc/modlib: Add pre module library symbol table support
libs/libc/stdio/lib_libvsprintf.c: Resolves the integer field width problem if Issue 35 for the cases of long and long long integer types.
libs/libc/stdio/lib_libvsprintf.c: Resolves the integer field width problem if Issue 35 for the case of integer types.
libs/libc/stdio: Remove CONFIG_NOPRINTF_FIELDWIDTH. That option does, indeed, make the printf family of functions much smaller. But it also adds a lot of complexity and makes the functions non-standard. Removing this might break some of the tinier platforms but it is the best thing to do for long term maintanance for for OpenGroup.org compliance.
When performing a floating point conversion the parsing code could
consume more than required characters from the input buffer. This made
impossible to convert input of form "1.1K" using format "%f%c".
Fix the issue by advancing the input buffer with the actual characters
converted as a float point number.
Signed-off-by: Mihai Serban <mihai.serban@gmail.com>
A few improvements to getaddrinfo:
- Use the protocol and socktype hints in returned address
- Ignore AI_PASSIVE argument if hostname is not NULL
Approved-by: GregoryN <gnutt@nuttx.org>
many locations: Change occurences of open() followed by file_detach() to file_open(). Change most non-controversion calls to open() to nx_open().
fs/inode/fs_fileopen.c: Flesh out file_open() with some interim, placeholder logic.
fs/inode/fs_fileopen.c: Add a framework for a file_open() implementation (no real logic in place yet).
fs/vfs/fs_open.c: Add nx_open() which is the same as open() except that it does not create a cancellation point nor does it modify the errno variable.
Squashed commit of the following:
mm/iob: The IOB available notifier is now just a wrapper around the common signal notifier.
sched/signal: Add a generic signal notification facility.
sched/signal/sig_evthread.c: More trivial naming changes.
sched/signal: Rename nxsig_notification() to nxsig_evthread() to make forthcoming naming additions more consistent.
sched/wqueue: Modify high priority work queue to support multiple threads.
sched/wqueue and libs/libc/wqueue: workqueues don't need set global data to zero since .bss is cleared automatically. Removing this unnecessary initialization also avoids the loss the work items queued before initialization.
libs/libc/netdb: Fix a link error in lib_gethostbynamer.c with protected build.
NOTE: g_lo_ipv4addr also exists in net/loopback/lo_globals.c which
can be linked with kernel build only.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: GregoryN <gnutt@nuttx.org>
binfmt/, libs/libc/unistd, and others: Rename CONFIG_EXECFUNCS_SYMTAB to CONFIG_EXECFUNCS_SYMTAB_ARRAY. Rename CONFIG_EXECFUNCS_NSYMBOLS to CONFIG_EXECFUNCS_NSYMBOLS_VAR. Unlike CONFIG_EXECFUNCS_NSYMBOLS, CONFIG_EXECFUNCS_NSYMBOLS_VAR holds the name of an 'int' variable that contains the number of symbols in the symbol table.
configs/sama5d4-ek: Partial update to knsh build instructions.
libdsp/lib_motor.c: ouch, forgot to change variable name
* libdsp: initial commit
* libdsp: cosmetics
* stm32f334-disco/buckboost: use a PID controller from libdsp
* stm32_adc.h: fix typo
* stm32_dac.c: set OUTEN bit for DAC1CH2 and DAC2CH1
* stm32_hrtim: cosmetic changes
* power/motor: direction parameter is now int8 + add overload fault
* libdsp: all floats with f-sufix
libdsp: add precision option for library
libdsp: add debug option for library and assertions in functions
libdsp: add current samples correction for SVM3
libds: add some motor control specific functions
libdsp: add basic speed observer
libdsp: fix phase shift in SMO observer
libdsp: add more logic to FOC
config/sim/dsptest: add dsptest configuration
* libdsp/lib_motor.c: remove unused comparation
* libdsp/lib_observer.c: update some comments
* libdsp/lib_motor.c: ouch, forgot to change variable name
Approved-by: GregoryN <gnutt@nuttx.org>
Master
* libdsp: initial commit
* libdsp: cosmetics
* stm32f334-disco/buckboost: use a PID controller from libdsp
* stm32_adc.h: fix typo
* stm32_dac.c: set OUTEN bit for DAC1CH2 and DAC2CH1
* stm32_hrtim: cosmetic changes
* power/motor: direction parameter is now int8 + add overload fault
* libdsp: all floats with f-sufix
libdsp: add precision option for library
libdsp: add debug option for library and assertions in functions
libdsp: add current samples correction for SVM3
libds: add some motor control specific functions
libdsp: add basic speed observer
libdsp: fix phase shift in SMO observer
libdsp: add more logic to FOC
config/sim/dsptest: add dsptest configuration
* libdsp/lib_motor.c: remove unused comparation
* libdsp/lib_observer.c: update some comments
Approved-by: GregoryN <gnutt@nuttx.org>
sched/clock: Move the implementation of clock() from libs/libc/time to sched/clock. This is necessary because it calls the (now) internal OS function clock_systimer. clock() is now accessed only via a system call in certain configuratins.
libs/libc/wqueue: Replace calls to clock_systimer() with calls to the equivalent clock().
Squashed commit of the following:
sched: Rename all use of system_t to clock_t.
syscall: Rename all use of system_t to clock_t.
net: Rename all use of system_t to clock_t.
libs: Rename all use of system_t to clock_t.
fs: Rename all use of system_t to clock_t.
drivers: Rename all use of system_t to clock_t.
arch: Rename all use of system_t to clock_t.
include: Remove definition of systime_t; rename all use of system_t to clock_t.
Squashed commit of the following:
libs/libxx: Fix some confusing in naming. If the directory is called libxx, then the library must be libxx.a (unless perhaps LIBCXX is selected).
libs/: Fix paths in moved library directories.
libs: Brute force move of libc, libnx, and libxx to libs. Cannot yet build it in that configuration.
